- RSS Channel Showcase 2565404
- RSS Channel Showcase 8004164
- RSS Channel Showcase 8263440
- RSS Channel Showcase 9620591
Articles on this Page
- 09/22/18--07:29: _Time Condition's Un...
- 09/22/18--17:35: _Dial DID > Route to...
- 09/22/18--18:05: _Sangoma FXO / FXS C...
- 09/23/18--12:17: _Voicemail on extens...
- 09/23/18--12:35: _No such label 'Arra...
- 09/22/18--07:29: Time Condition's Unknown State
- 09/22/18--18:05: Sangoma FXO / FXS Card Won't Start + WebSocket Error
- 09/23/18--12:17: Voicemail on extensions but not on ring group
We have The following
Trunks–>Inbound Routes -->Time Conditions: Inbound Time Based (referring to Time Groups : Open Times)–>If Match Call Flow Control, If not Match Annoucments–> … etc
[root@freepbx ~]# amportal a ma list | grep framework
| framework | 126.96.36.199 | Enabled | GPLv2+ |
[root@freepbx ~]# cat /etc/schmooze/pbx-version
That said in time conditions if we force the setting to non matching (override) it will redirect but for some reason this module has stopped being able to trigger on its own. and reports an Unknown State.
Is it possible to configure FreePBX to accept a call from a specific DID > route to a IVR where the caller would enter a “designated code” that transfers them to an extension or queue where a dialtone is given so they can call out of the pbx?
Recently we had a power outage and the Sangoma FXO / FXS card won’t initialize. The error message I’m getting is " DAHDi Doesn’t appear to be running. Click the ‘Restart DAHDi & Asterisk’ button below". When I do this, nothing happeneds. Also after doing a command line restart, I have the following errors on the FreePBX dashboard:
Invalid Websocket transport for zulu
Unable to enable websocket driver!
No conference room app
Neither app_meetme nor app_confbridge is configured in Asterisk, conferencing, paging and other functionality will not work properly
As a result I can’t make or receive incoming calls. My analog trunk is delivered to me via a SPA122 and I’ve confirmed dialtone at the unit. I’ve also confirmed dialtone is going into the Sangoma card. I haven’t tried reseating the card, though I don’t think that’s what the issue is. I’ve also tried a command line update via “yum update”, though no updates where available.
In module admin, I can’t up date Zulu to the latest release until the user manager module is updated, which doesn’t appear to be ready for download.
Current PBX Version:188.8.131.52
Current System Version:12.7.5-1807-1.sng7
Total Module Count:117
The numbers below may be inaccurate if new modules have been released since the last check:
Last online check:
Modules with Upgrades:2
System Upgrades Available:0
Please advise as any help would be greatly appreciated.
Voicemail is wanted on the extensions but not in the ring group. Is ending the call before the extension’s mailboxes fire the only way?
Hey, after the migration from Distro 6 to SNG 7 (clean install and manual migration of configs), I get the Warning messages for “Catch All” scenario.
The “catch all” inbound route is set to terminate the call with busy tone, but the execution stops in sub-record-check context with a warning that there is no label called “Array”.
Full log is here: https://pastebin.freepbx.org/view/091eb6cf
Could you please tell me, how to handle the inbound calls to unspecified DID correctly in SNG7?
Thank you in advance.