@jayjoynson wrote:
Hi, I have been scratching my head with this for a few days and I am sure it is something really simple...
I have upgraded my PBX to 10.13.66-1 (I will go to the latest as soon as everything is OK)
I have setup the Firewall, I can access the GUI, SSH, inbound and outbound calls are all working...
- eth0 is set to "External"
- Local IP Range is "Trusted"
- as are all IP Addresses related to SIP Provider
However the problem is I cannot access the GUI from outside the Local IP Range, I used to put a port forward on router for http 80, however for the firewall to work correctly, the setup guide states that the PBX must be outside of NAT such as DMZ or similar...
I have put the External IP address into the Networks tab and told it to be trusted, I have also tried External/Other/Internal on the Services for HTTP Web Management, I have changed the port from Port 80 and that is reflected in the Port/Service Maps.
I also got a DDNS from No-IP and placed that onto the Router at the remote location and put the DDNS name into the Network Tab and marked as Trusted but still nothing....
I really need to be able to access the PBX remotely.... and any ideas or thoughts will be greatly appreciated..
I am not quite a novice and know my way around but by no way am I a Linux Guru, please be gentle
Many thanks
Jay
Posts: 2
Participants: 1