@awesomo wrote:
My wonderful State of Michigan has enacted new rules for buildings over 7,000 sq ft (used to be over 40,000 sq ft). When a 911 call is made, the 911 dispatcher needs to be aware of the area or room# the person is calling from when they call 911.
From my understanding, this is all done at the ITSP on a unique DID. Is it as simple as setting up E911 for multiple DID's with the correct locations and setting the E911 CID in FreePBX on a per extension basis?
Here's a brief excerpt and here's a full paper on the matter: http://www.benzieco.net/FINAL_MLTS_Guidelines.pdf
One Building, Multiple Floors
The specific location information for a multi-story building with 1) its own street address, and 2)
a total area of more than 7,000 square feet must provide, at a minimum:
The building’s street address
The building floor
Caller’s location within the facility/premises
Example in Practice: A three-story building, containing two 2,500 square foot floors and a 2,500
square foot basement floor. The total square footage is in excess of 7,000 square feet and the
rule is applicable.
Posts: 3
Participants: 3