After migrating to FreePBX 17, I have encountered the following issues that forced us to move back to 16 until they are addressed:
- Outbound routes no longer work when we prepend for us the 9 to separate calls between two outbound numbers on the same trunk at voip.ms
- when Sangoma phones (we use S500s) are hard reset, it no longer is able to get the configuration from the FreePBX server which is on the default VLAN but if it were able to get the configuration file, it would configure the S500s to a separate VOIP VLAN.
Our network has no switch ports specifically assigned to a VLAN…just use tagging to allow the router to pick up the tagged traffic whichever port is the source/destination. It works and is uncomplicated – at least in 16.
Two big issues that have caused us to move back to version 16 until they are fixed/addressed.
Thank you!
1 post - 1 participant