@lb11 wrote:
Hi everyone!
I've made a post before this post about to connect a PSTN to Freepbx, but I do not get it working.
I've installed FreePBX on my Raspberry Pi. This works perfectly. I can dial internal to my phones, but i want to dial to the outside world. I live in the Netherlands, and have a analog telephone line. At least, i have a Draytek modem which works as a ATA-adapter. That modem is from my ISP, Vodafone. The modem connects to the SIP-servers from vodafone and converts it to PSTN (so i can connect my analog phones to the modem).
Now, i want to connect that ''PSTN-line'' (which is actually a VOIP line, converted to analog), to FreePBX. I've read on the Internet, that i can use a FXO-adapter. I've purchased a Linksys SPA3000, and try to get it worked. But without succes. I have readed several tutorials, but it won't work. I get a message when i try to call. ''All circuits are busy now, please try your call again later''. I don't know what the problem is because i've followed all steps axactly.
My trunk SIP settings in FreePBX are these (the SPA3000 has a static ip-address, in this case a 172.x.x.x ip-range, and FreePBX has ip-address 172.16.2.112):
host=172.16.2.113 (the ipaddress of the SPA3000)
username=username
secret=password
type=friend
qualify=yes
port=5062
nat=no
dtmfmode=inband
context=from-pstn
canreinvite=noMy head explodes, because I 've been busy for weeks to get this worked.
Can anyone help me? Inbound calls also don't work.
Posts: 10
Participants: 4