Thought i could help with setup a Spa8800 with pjsip

@Henry_power wrote:

Thought i could help

******** FreePBX
General :
Trunk Name = spa8k8line1........ "same as User ID:"
Outbound CallerID : 7111........ "same as Dial Plan 8:" DID value

PJSIP Settings:
General :
Username : spa8k8line1............ "same as "Trunk Name"
Secret : 101hsc ................."Password:"
Authentication : "Outbound"
Registration : "Receive"

Advanced
Contact User : spa8k8line1 ......."same as "Trunk Name"
DTMF Mode DTMF : RFS 4733 .........."same as Tx Method: Auto
Codec
Check : ulaw ....................."same as Preferred Codec G711u"

Inbound Routes
Description : spaline1........... "any name"
DID Number : 7111............... "same as Dial Plan 8:" DID value
Continue setting up the incoming Routes as you normally would

***********spa8800
Dial Plans
Dial Plan 1: ([23456]xxxxxxS0|1xxxxxxxxxxS0|[789]xxS0)
Dial Plan 8: (<:7111@192.168.64.100>S0)
Note:8= (<:DID @ FreePFX ip address> SO)

VoIP-To-PSTN Gateway Setup
FXS VoIP Caller DP: 1
VoIP Caller Default DP: 1

PSTN-To-VoIP Gateway Setup
PSTN CID For VoIP CID: NO
PSTN Caller Default DP: 8

registration should occur with the next Spa8800 registration cycle
in both FreePBX and Spa8800

Posts: 1

Participants: 1

Read full topic