@vianneyjs wrote:
Hi guys,
I registered the mac address of my remote Sangoma S500 @Sangoma Portal, at this point the phone pulls its config from its deployment, but it does not pull its VPN tar file. Redirection type being used is HTTPS/FQDN along with the port number (83)
I created a template on the EPM for remote Sangoma phone and set the Provision Server Protocol to HTTP.
If I manually upload the VPN tar file to the phone, after restarting it, it will register to the PBX with its corresponding settings defined on EPM.
The phone is upgraded to the latest firmware available: 2.0.4.21
This FreePBX deployment is up-to-date, including the commercial modules: System Admin and EPM.Any idea why this remote phone is not pulling its VPN tar file?
Thank you.
Posts: 3
Participants: 2
