@Bradbpw wrote:
I recently changed my ISP which gave me a new static IP a new (bridged) modem and a new router (Asus RT-N66U). My PBX was working well before these changes but now I'm having audio issues.
I have 4 remote extensions at a satellite office that connect over WAN. These phones are registering but I can not seem to get any audio through to them. Even calling from an extension on the same network as the PBX to the remote extension, no audio is transmitted. I do have one IAX extension on my cell phone Zoiper app. If I call that the Zoiper IAX extension can receive audio, but not send audio.
On my router, I have port 5060 UDP/TCP forwarded to my PBX and ports 10001:20000 UDP forwarded to the PBX. I followed the guide below to adjust my SIP settings and the RTP ports to 10001:20000. My router also has NAT enabled for SIP and firewall enabled.
http://[http://wiki.freepbx.org/pages/viewpage.action?pageId=24051965I'm at a loss for what to try next. I would imagine this is a router issue since that is the new variable, but It's also possible there may be some IP address setting in my PBX that I have not changed.
Any help would be appreciated.
Posts: 3
Participants: 2