@robertg1234 wrote:
Hello, I have a brand new Sangoma FPBX 40 Appliance, and I sub to Vitelity. I have FreePBX 13.0.191.11. I am moving from an old 2.10.1.9 system that is working fine, but on an old PC.
I have configured a simple Outbound trunk using the exact peer Config Sample in Walt's support page for FreePBX. And I have a single Outbound route to send all calls outside, the same route I had in the earlier version (even though the GUI looks very different).
Now, when I make outbound calls, Vitelity sends a 407 Proxy Authentication Required. But FreePBX does not respond back with any Proxy Auth Digest. Then a loop happens as FBPX tries Vitelity again and Vitelity keeps responding with 407, with FBPX not properly responding with a Digest. But on my old system, the 407 is properly ACK'd and a Digest sent. But not my new system as seen below:
0.000000 10.10.10.10 -> 64.2.142.17 SIP/SDP 1021 Request: INVITE sip:18004444444@outbound1.vitelity.net | , with session description 0.039683 64.2.142.17 -> 10.10.10.10 SIP 603 Status: 407 Proxy Authentication Required | 0.500403 10.10.10.10 -> 64.2.142.17 SIP/SDP 1021 Request: INVITE sip:18004444444@outbound1.vitelity.net | , with session description 1.039500 64.2.142.17 -> 10.10.10.10 SIP 603 Status: 407 Proxy Authentication Required | 1.500163 10.10.10.10 -> 64.2.142.17 SIP/SDP 1021 Request: INVITE sip:18004444444@outbound1.vitelity.net | , with session description 2.039693 64.2.142.17 -> 10.10.10.10 SIP 603 Status: 407 Proxy Authentication Required | 3.500222 10.10.10.10 -> 64.2.142.17 SIP/SDP 1021 Request: INVITE sip:18004444444@outbound1.vitelity.net | , with session description 4.044356 64.2.142.17 -> 10.10.10.10 SIP 603 Status: 407 Proxy Authentication Required | 7.499811 10.10.10.10 -> 64.2.142.17 SIP/SDP 1021 Request: INVITE sip:18004444444@outbound1.vitelity.net | , with session descriptionSo what Peer option (or missing toggle) do I need for Proxy Auth to be properly responded to by my FPBX?
Thanks in advance!
Posts: 1
Participants: 1