AVAYA 9611G Configurarion

@dpochet wrote:

Hi,
My hardware information
Linux 2.6.32-642.6.2.el6.x86_64 on x86_64
Processor information Intel(R) Xeon(R) CPU E5504 @ 2.00GHz, 4 cores
4 GB RAM
Asterisk 13.17.1
FreePBX 13.0.192.18

for some of you that have a hard time working with the avaya 9611G phones these is my 46xxsettings.txt

SET DOMAIN 10.0.1.65
SET SIPDOMAIN 10.0.1.65
SET SIPPORT 5060
SET SIP_CONTROLLER_LIST 10.0.1.65:5060;transport=tcp
SET SIPREGPROXYPOLICY alternate
SET CONFIG_SERVER_SECURE_MODE 0
SET SIPPROXYSRVR 10.0.1.65
SET SIPSIGNAL 1
SET SIP_PORT_SECURE 5061
SET ENABLE_AVAYA_ENVIRONMENT 0
SET DIALPLAN xxxxxxxxxxx|*xxxx
SET ENABLE_CONTACTS 1
SET ENABLE_MODIFY_CONTACTS 1
SET APPSTAT 1
SET OPSTAT 111
SET MWISRVR 10.0.1.65
SET SUBSCRIBE_LIST_NON_AVAYA "reg, dialog, message-summary, avaya-ccs-profile"
SET PHNNUMOFSA 9
SET SNTPSRVR 10.0.1.65
SET GMTOFFSET -5:00
SET DSTOFFSET 1
SET DSTSTART 2SunMar2L
SET DSTSTOP 1SunNov2L
SET DISPLAY_NAME_NUMBER 1
SET SIG 2
SET HTTPSRVR 10.0.1.85
SET HTTPDIR phoneimage/7.0.1.4
SET FILE_SERVER_URL http://10.0.1.85/phoneimage/7.0.1.4
SET PSTN_VM_NUM *97
SET ENABLE_EARLY_MEDIA 1
SET RTP_PORT_LOW 10001
SET RTP_PORT_RANGE 9999
SET SIG_PORT_LOW 5060
SET SIG_PORT_RANGE 1
SET LOGOS HOTWLOGO=http://10.0.1.85/phoneimage/Logos/yourlog.jpg
SET CURRENT_LOGO "NEWLOGO"
SET ENABLE_G711A 1
SET ENABLE_G711U 1
SET ENABLE_G722 1
SET ENABLE_G726 1
SET ENABLE_G729 1

This the configuration that I have working in my phones, remember that you need to install the sip firmware in you phones, any question ask me thru here, no private massage in that way others can read and share.

the 10.0.1.65 is the asterisk server(Freepbx)
the 10.0.1.85 is the http server for to install the firmware and to share the background logo

note: in freepbx 13 you need to enable the TCP transport on Setting -> Asterisk sip setting

Posts: 1

Participants: 1

Read full topic