@st15jap wrote:
Hello, I am new to Freepbx and so far its been a great experience. Very straight forward with lots of documentation. We are moving all our phones in-house, we have everything working in the office. Our issue is NAT. We have a block of public IP addresses which one is registered to the PBX. We plan to use the built in firewall with iptables and fail2ban to secure it. Basically our setup is this. The PBX is on a XXX.XXX.130.152/29. We can register phones to another subnet on our XXX.XXX.8.0/24. However as soon as we try to register a phone behind a router on a 192.168.1.0 network it fails. I have followed the tutorial "Using a Remote Extension with FreePBX/Asterisk".
looking at the tcpdump :
Via: SIP/2.0/UDP 192.168.1.109:5060;branch=z9hG4bK-7615b046 From: <sip:1006@XXX.XXX.130.156>;tag=f08026d775cdaf5o0 To: <sip:1006@XXX.XXX.130.156> -- Max-Forwards: 70 Contact: <sip:1006@192.168.1.109:5060>;expires=3600It obviously cant communicate with the phone using the 192 network so basically the phone times out. Then tries to re-register in a endless loop because the server cant communicate with it. I have read though the forums and for the life of me cant figure out whats i need to do here. Any help is much appreciated. I feel this is probably a simple fix of something i am missing.
For troubleshooting purposes i have turned off the firewall, iptables and fail2ban. We are using Freepbx 13.0.19.
Posts: 2
Participants: 2