@ray123 wrote:
I have a working setup of Twilio and FreePBX. All us numbers work fine and are recognized / routed using inbound routes. But when using any incoming DID with canadian area codes, it fails and I get a error message from the carrier saying this number is not in service. If I create a route with a blank DID FreePBX picks it up. I am getting the following errors when scanning using tshark:
176.780100 54.172.60.0 -> 192.168.1.110 SIP/SDP 1475 Request: INVITE sip:1647490XXXX@192.168.1.110:5061 | , with session description
176.780477 192.168.1.110 -> 54.172.60.0 SIP 783 Status: 401 Unauthorized |
176.799436 54.172.60.0 -> 192.168.1.110 SIP 476 Request: ACK sip:1647490XXXX@192.168.1.110:5061 |
176.804371 54.172.60.2 -> 192.168.1.110 SIP/SDP 1476 Request: INVITE sip:1647490XXXX@192.168.1.110:5061 | , with session description
176.804713 192.168.1.110 -> 54.172.60.2 SIP 784 Status: 401 Unauthorized |
176.825020 54.172.60.2 -> 192.168.1.110 SIP 477 Request: ACK sip:1647490XXXX@192.168.1.110:5061 |
176.842165 54.172.60.3 -> 192.168.1.110 SIP/SDP 1474 Request: INVITE sip:1647490XXXX@192.168.1.110:5061 | , with session description
176.842535 192.168.1.110 -> 54.172.60.3 SIP 784 Status: 401 Unauthorized |
176.862347 54.172.60.3 -> 192.168.1.110 SIP 477 Request: ACK sip:1647490XXXX@192.168.1.110:5061 |
176.867261 54.172.60.3 -> 192.168.1.110 SIP/SDP 1476 Request: INVITE sip:1647490XXXX@192.168.1.110:5061 | , with session description
176.867594 192.168.1.110 -> 54.172.60.3 SIP 784 Status: 401 Unauthorized |
176.886929 54.172.60.3 -> 192.168.1.110 SIP 477 Request: ACK sip:1647490XXXX@192.168.1.110:5061 |
Posts: 1
Participants: 1