@jlinkcom wrote:
Hello, I was looking around on how to create a trunk and give SIP service using IP Authentication just like many wholesalers do. I found this thread: http://community.freepbx.org/t/solved-how-to-create-ip-based-authentication-with-two-asterisk-servers-using-freebpx/8460 where SkykingOH said to create a trunk with these items:
disallow=all
allow=ulaw
canreinvite=no
dtmfmode=rfc2833
host=x.x.x.x
insecure=very
port=5060
qualify=yes
type=friendHow do I flip that around where I'm the provider not the client. Basically on my cloud PBX I would have two Trunks, "MYWholesaler" and "MYCustomer". So when my customer dials out from their PBX, they have their system setup to send outbound SIP calls to my cloud server and bounces right out to my wholesaler, carrying their caller ID that their PBX sends, etc. And same thing for their incoming calls, it would come in from MYWholesaler and bounce right out via MYCustomer and go to their PBX as an incoming call to their PBX. I just want my customer to authenticate with me using their IP just like I do with my wholesaler using my IP. That way my customer can simply have whatever SIP based PBX solution they want in their office and they just use my IP as a trunk on their system.
Thank you.
Posts: 2
Participants: 2