@sag060002 wrote:
FreePbx distort running Free PBX 6.12.65-30 SP1 running asterisk 11.19.0 (based in the Uk)
I have an AEX410 analogue card installed with 1 FXS port and 3 FXO (2,3,4) ports. This shows up on the DAHDi config correctly. I have setup a dahdi trunk, Outbound caller Id with my home tel number and with outgoing settings Group O (round Robin).
I have also setup a single outgoing route with correct dial pattern ( XXXXXXXXXXX) and trunk sequence to the analogue trunk (no other settings defined).
When i use a soft phone extension to ring to an outside line in the asterisk CLI shows "DAHDI/1-1 is ringing" but the call doesn't actually connect to the outside line? I have tested the line and it is functioning? what do i need to do to allow the soft phone to connect via the FXO port on the server to the outside line?
Posts: 3
Participants: 2