@tattosti wrote:
Hi guys im trying to configure a GSM card using the driver of tdm2400p : modprobe wctdm24xxp, like his datasheet says, i was able to make outbound calls creating a trunk and creating an outbound router, but i not able to route or even answer inbound calls, alredy check the dahdi config and i cant find the mistake. Please if any one can help with this problem.
This is the asterisk cli output:== Starting post polarity CID detection on channel 3
[INSERT INTO cel (eventtype,eventtime,cid_name,cid_num,cid_ani,cid_rdnis,cid_dnid,exten,context,channame,appname,appdata,amaflags,accountcode,uniqueid,linkedid,peer,userdeftype,userfield) VALUES ('CHAN_START',{ts '2016-03-03 18:22:18.694109'},'','','','','','s','from-analog','DAHDI/3-1','','',3,'','1457043738.0','1457043738.0','','','')]
-- Starting simple switch on 'DAHDI/3-1'
[2016-03-03 18:22:18] WARNING[1583][C-00000000]: sig_analog.c:2533 _analogss_thread: Channel DAHDI/3-1 in prering state, but I have nothing to do. Terminating simple switch, should be restarted by the actual ring.
-- Hanging up on 'DAHDI/3-1'
-- Hungup 'DAHDI/3-1'
[INSERT INTO cel (eventtype,eventtime,cid_name,cid_num,cid_ani,cid_rdnis,cid_dnid,exten,context,channame,appname,appdata,amaflags,accountcode,uniqueid,linkedid,peer,userdeftype,userfield) VALUES ('HANGUP',{ts '2016-03-03 18:22:18.700659'},'','','','','','s','from-analog','DAHDI/3-1','','',3,'','1457043738.0','1457043738.0','','','')]
[INSERT INTO cel (eventtype,eventtime,cid_name,cid_num,cid_ani,cid_rdnis,cid_dnid,exten,context,channame,appname,appdata,amaflags,accountcode,uniqueid,linkedid,peer,userdeftype,userfield) VALUES ('CHAN_END',{ts '2016-03-03 18:22:18.702533'},'','','','','','s','from-analog','DAHDI/3-1','','',3,'','1457043738.0','1457043738.0','','','')]
[INSERT INTO cel (eventtype,eventtime,cid_name,cid_num,cid_ani,cid_rdnis,cid_dnid,exten,context,channame,appname,appdata,amaflags,accountcode,uniqueid,linkedid,peer,userdeftype,userfield) VALUES ('LINKEDID_END',{ts '2016-03-03 18:22:18.703494'},'','','','','','s','from-analog','DAHDI/3-1','','',3,'','1457043738.0','1457043738.0','','','')]
== Starting post polarity CID detection on channel 3
-- Starting simple switch on 'DAHDI/3-1'
[2016-03-03 18:22:25] WARNING[1585][C-00000001]: sig_analog.c:2533 _analogss_thread: Channel DAHDI/3-1 in prering state, but I have nothing to do. Terminating simple switch, should be restarted by the actual ring.
[INSERT INTO cel (eventtype,eventtime,cid_name,cid_num,cid_ani,cid_rdnis,cid_dnid,exten,context,channame,appname,appdata,amaflags,accountcode,uniqueid,linkedid,peer,userdeftype,userfield) VALUES ('CHAN_START',{ts '2016-03-03 18:22:25.124934'},'','','','','','s','from-analog','DAHDI/3-1','','',3,'','1457043745.5','1457043745.5','','','')]
-- Hanging up on 'DAHDI/3-1'
-- Hungup 'DAHDI/3-1'
[INSERT INTO cel (eventtype,eventtime,cid_name,cid_num,cid_ani,cid_rdnis,cid_dnid,exten,context,channame,appname,appdata,amaflags,accountcode,uniqueid,linkedid,peer,userdeftype,userfield) VALUES ('HANGUP',{ts '2016-03-03 18:22:25.132163'},'','','','','','s','from-analog','DAHDI/3-1','','',3,'','1457043745.5','1457043745.5','','','')]
[INSERT INTO cel (eventtype,eventtime,cid_name,cid_num,cid_ani,cid_rdnis,cid_dnid,exten,context,channame,appname,appdata,amaflags,accountcode,uniqueid,linkedid,peer,userdeftype,userfield) VALUES ('CHAN_END',{ts '2016-03-03 18:22:25.134911'},'','','','','','s','from-analog','DAHDI/3-1','','',3,'','1457043745.5','1457043745.5','','','')]
[INSERT INTO cel (eventtype,eventtime,cid_name,cid_num,cid_ani,cid_rdnis,cid_dnid,exten,context,channame,appname,appdata,amaflags,accountcode,uniqueid,linkedid,peer,userdeftype,userfield) VALUES ('LINKEDID_END',{ts '2016-03-03 18:22:25.137622'},'','','','','','s','from-analog','DAHDI/3-1','','',3,'','1457043745.5','1457043745.5','','','')]
Posts: 1
Participants: 1