0 active calls but 2 channels show up
@MachineGun wrote: I show 2 channels up although there are 0 active calls. The phone that shows active on one of the channels shows busy on a BLF from another phone, but nobody is on it. Posts: 2...
View ArticleIncoming line drops immediately, sometimes
@mcisar wrote: I have a very unusual situation that's started a couple days back. We have two identical freepbx systems (don't have the version handy but about 3 years old) both have Sangoma A200...
View ArticleVoip carrier issue
@assos40 wrote: Hi,We are using PBX Firmware:6.12.65-30 and asterisk 11I have recently an issue with my voip carrier.1) On some outbound calls the agent gets a busy tone but when checking the call...
View ArticlePorts required for UCP and XMPP for remote users
@avayax wrote: What ports on my FreePBX machine do I have to enable access to for my remote users to use UCP, XMPP chat (licensed) and presence?My remote users have VPN access to our network and I...
View ArticleHow do you get back a module that has been removed in the GUI
@jervin wrote: OK, I removed isymphony3 from the Module Admin gui, how to I get it back in the list. It seems as if it's still running as it has a pid and it has a subdirectory (/opt/isymphony3). I'd...
View ArticleAudiocodes mp-114 and freepbx
@techs wrote: Need some help in configuring a audiocodes mp-114 as a pstn gateway, and a freepbx system. jason Posts: 1 Participants: 1 Read full topic
View ArticleFcc robocall list
@ganda wrote: So I just saw a story on this list of robocallers the fcc is going to release every week. How could I automate importing the csv file into my blacklist?...
View ArticleDifference between Attendant and BuddyList in EPM?
@demani wrote: Before I get in too deep setting one or the other up, what's the functional difference between the two? Do extensions set up as Attendant allow call pickup, while BuddyList is just BLF...
View ArticleClik here to view.
If you could help with the H/W specs
@agasasterisk wrote: Continuing the discussion from Very simply (i hope) - hardware reqs. for an SMB install: Very simply (i hope) - hardware reqs. for an SMB install 40 phones is a small system....
View ArticleISDN not playing back Busy tones when extension busy
@Sc00by wrote: Hi All I've just been made aware of a strange issue regarding people dialling in from the outside to a number that is busy. When they do all they hear is ringing for 20seconds then they...
View ArticleFXO incoming calls with delay and hangup issues (Openvox A400E)
@nelsonrc15 wrote: Hi guys... My apologies if I sound stupid or if I am missing something basic. I used to be a Cisco CUCM guys and I am now moving to Freepbx so I am a newbie in this area. I have a...
View ArticleSystem notification emails: Fax, VM, etc
@fishnet wrote: I recently discovered that I have stopped receiving my email notifications when I receive a VM or a fax. I have rebooted the system, changed email addresses, ensured they aren't...
View ArticleStorage space is getting high on the following drives of your system
@claloano wrote: I woke up with a nasty surprise .... My disk is filling up at a rate of one to 5 gigabytes per month Since you use the cloud disk resource must be kept contained ... Currently I have...
View ArticleWhich codec?
@bgroper wrote: I often wish I could find out which codec has been used in a particular call.Might it be possible to capture the codec details in the asterisk cdr table at userfield ? Posts: 1...
View ArticleWww.freepbx.org/configuration_files missing?
@bgroper wrote: Lots of configuration files include the warning : ;--------------------------------------------------------------------------------;; Do NOT edit this file as it is auto-generated by...
View ArticleCisco 7970 BLF
@mangus580 wrote: I have looked all over for info on this. Everything I find appears to be quite dated, and is talking about patching asterisk files, etc. Most the information I am seeing refers to...
View ArticleClik here to view.
Freepbx not showing right time for Turkey
@nbthost wrote: Turkey decided to use winter daylight savings time 2 week later this year and this has been applied to tzdata-2015g-2 package in Centos Base repo but Freepbx doesn't use Centos Base...
View ArticleGXP2140 config file
@Tgarius wrote: I'm looking for a sample GXP2140 config file I can start with. I have OSS endpoint and it does some basic config set as a GXP2100. Thanks Posts: 1 Participants: 1 Read full topic
View ArticleUpgrate 13 : file_get_contents(/etc/schmooze/operator-panel-brand): failed to...
@britabroad wrote: So, just upgraded to FreeBPX 13 - everything except the Web Interface is running perfectly (even after a total reboot). When I log into my web server I get the following :...
View ArticleClik here to view.
Call recording options using In-Call Asterisk Toggle Call Recording
@avayax wrote: Using "In-Call Asterisk Toggle Call Recording" feature code *1 to record calls.Do the extension's recording options apply to this type of recording as well? Recording works, but I would...
View Article