On screen call notifications
@bigmillz wrote: Trying to find a way to give our reps on screen call notifications when their phone rings. I noticed CID Superfecta can send Growl notifications, but it doesn't seem very well...
View ArticleIvr not answering incoming calls
@Don44 wrote: I have a google voice number set as an inbound route that is linked to an ivr the problem is that it will work right for about 6 hours but then the ivr will not answer and the number...
View ArticlePBX->PBX->outbound callerID issue
@orb wrote: I am setting up a new FreePBX distro box running Asterisk 13. However, I need to relay calls out to the PRI card located in my old server running Asterisk 1.4.36/FreePBX 2.9. Have a SIP...
View ArticleYealink showing calling number instead of called number in History when Send...
@avayax wrote: Looking at the call history of my Yealink phones I see the number of the calling party (CID:4000 e.g.) instead of the called party when using Send RPID or Send...
View ArticleChan_dongle SMS: Error parsing incoming message '+CMGR: 0,,72
@s4ndst0rm wrote: Hi There! I'm using freepbx with chan_dongle. It is working great but some SMS throw an exception. [2017-02-05 16:22:27] VERBOSE[16745][C-0000004e] pbx.c: Spawn extension...
View Article401 Unauthorized
@raz23 wrote: Running into a funky issue here. Using a SBC (Blox SBC) in front of a test PBX and am running into a couple issues with inbound and outbound calls.Inbound is toast with a 401...
View ArticleAsterisk VOIP Configuration
@systems wrote: Hi guys I have now installed Asterisknow 10.13 and I have configured local extensions. Now I need to configure VOIP for Inbound and Outbound call. Can anyone please help me to...
View ArticleDashboard not auto-refrashing
@bazzacad wrote: Is the dashboard supposed to auto-refresh?When I had the old PiaF distro, I could leave the System Stats page open & the green bar graphs would update in real-time with active...
View ArticleKvstore repair
@Bismark wrote: I was getting an error in the dashboard that kvstore was crashed.I ran "mysqlcheck --repair --all-databases" which cleared the error.The following appeared in the output:...
View ArticleFull backup on bootable disk
@comdif wrote: Dear all, I'm working on a script to hot backup full disk on a new bootable disk. One sata disk is in the server with original Freepbx install with 3 partitions /boot /root and swap...
View ArticleVoip Call gateway
@pearj wrote: Hi, I'm wondering what would be involved in setting up a call gateway whereby you call into FreePBX using a DID, and then you dial the destination number (using DTMF) you want to call...
View ArticleNexvortex Trunk Failure-Contact header port 5060 but invite header port 48638
@avayax wrote: Setting up a trunk with Nexvortex, but they are failing with chan_sip.c:23861 handle_response_invite: Received response: "Forbidden".My provider is saying that calls are failing to...
View ArticleUnderstanding __VARIABLES__ in FreePBX
@Dan2731 wrote: OK, I'm a relative noob when it comes to FreePBX and I'm having a hard time trying to understand variables. Here is the issue. Backup templates use a lot of variable references, such...
View ArticlePossible Bug
@skip189 wrote: I believe that there is a bug cause the work around seems a little bit strange. I'm happy to put in the bug report but wanted to confirm that it isn't actual behavior. I am using...
View ArticleCan not connect to asterisk
@linuxman wrote: after I turn off my PBX and then back on I can access the GUI but I keep getting error that says Can not connect to asterisk how do I fix this. Thank you. Posts: 4 Participants: 2...
View ArticleClik here to view.
Happiness With Sonicwalls - It can happen!
@GSnover wrote: Ok - Wasted quite a bit of time this morning with a new configuration we were trying out and I thought I would post it here so that no one else has to waste the same amount of time...
View ArticleFReePBX /Asterisk 13 with DINSTAR DAG1000-40 voip gateway
@shekhar wrote: Dear AllI am new to FreePBX and Asterisk 13. I have downloaded FreePBX distro and installed on a machine. The Distro is working fine. I have also configured 2/3 softphones and checked...
View ArticleSIP Paging adapter
@koncreat wrote: We have a SIP paging adapter setup in FreePBX that until yesterday was working. When someone dials 1051, paging group that the paging adapter is setup in, we will get a page over our...
View ArticleCloud PBX Deployment Help
@amckenzie wrote: Hello all, I just deployed the latest version of FreePBX on a Vultr VPS. I have deployed numerous FreePBXs on premises but this is my first cloud deployment. I have activated the...
View ArticleOutbound Caller ID problem with two phones
@jmp7624 wrote: I have freepbx installed and updated on a raspberri pi 3. I have two google voice numbers added, but when I call from my second number the outbound Caller ID shows the first google...
View Article