Call disconnects after 15 minutes and 30 seconds
@axiombts wrote: My calls keep dropping after 15 and 30 seconds. I am running FreePBX Firmware:10.13.66-17 and Asterisk Version: 11.23.1. Posts: 2 Participants: 2 Read full topic
View ArticleWhere are User created speed dials stored
@avayax wrote: Speed dials created via feature code *75, where are they stored and are they visible in FreePBX? Posts: 4 Participants: 2 Read full topic
View ArticleRouting incoming calls out to cell phones/external numbers
@wildnrg wrote: I'm having problems when trying to route incoming calls out to a cell phone or external number when the receptionist is not in. When an incoming call comes in the receptionist has no...
View ArticleCall Recordings unable to write new file - Permission Error
@FreeSWServers wrote: Good Morning, Today I came in and my boss was unable to find a recording she was looking for. After looking into it, it seems that no calls had been recorded since 4:30am. I...
View ArticleRouting specific outbound call to extension instead of trunk
@lbalsley wrote: I want to prevent extensions from calling numbers that exist on the phone system and thus using up two SIP trunk channels where none are needed. For instance, I have a conference...
View ArticleStrange behavior in call forward
@roli8200 wrote: I have very strange behavior of the call forwarding to external numbers. For the forward of a extension to a external number, I created a ring group with external number as only...
View ArticleUpgrading old installation: 5.211.62-6 to current
@nickb wrote: I'm working on upgrading a very old installation, from 5.211.62-6 to current. I used the documentation at http://wiki.freepbx.org/display/PPS/FreePBX-Distro-5.211.65 to upgrade through...
View ArticleQueues & Auto Pause
@yankyok wrote: Hi FreePBX 12.0.76.4 We currently use Auto Pause in Queues which works perfectly. Any way for a manager (or each user for themself) get an alert that an/he agent is in pause state?...
View ArticleAll: Call Flow Toggle *28 not work in Freepbx 13
@PeterFox wrote: Hi,I have many call flow and I need to activate or deactivate all with the default code *28. When I dial *28 I read on the cli: -- Executing [s@macro-user-callerid:34]...
View Article911 email notification - dialplan question
@serinfbco wrote: This subject isn't new and there are many ways to achieve this. We want to keep simple and in fact only 3 new lines are required in the dialplan. This is working but could be more...
View ArticleFax email bouncing because of IPv6 without rDNS with google
@Hawkeye wrote: Started seeing mail being bounced back from google due to IPv6 rRDNS not existing for it. Noticed postfix is configured with: net_protocols = all It should be changed to >...
View ArticleUser Permissions
@ldazeredo wrote: Hello, I'm trying to create an User wich will be allowed to see the CDR Reports and recordings just for defined extensions set by me. I have tried by creating this in Admin >...
View ArticleSystem in standby after failed upgrade to 10.13.66-17. Please help!
@striker495 wrote: During an upgrade from 10.13.66-12 to 10.13.66-18, the system hung during the 10.13.66-17. rebooted hoping it would respond but both of my nodes are in standby and will not go...
View ArticleSearch CDR Reports via URL
@FreeSWServers wrote: In the ARI Call Recordings we searched via the following URL to narrow down results. /recordings/index.php?display=cdr&q=2155554567 How can I do something similar with the...
View ArticleSuspicious of System Compromise
@addisonb wrote: I'm not certain yet. But I'm getting suspicious of a compromise. Yesterday morning our phone system rebooted itself out of the blue. It had never done that before. When it came back...
View ArticleIs PJSIP stable?
@dmanolis79 wrote: Do all the features of of pbxact work great with pjsip or should I stick with chan_sip? Is there a reference guide on what the benefits are for PJSIP over chan_sip? Thank you in...
View ArticleLet's Encrypt works with DynDNS.org? That doesn't seem right
@GSnover wrote: On a whim today I tried setting up a DynDNS,org hostname for one of my IP's and then proceeded to use Certificate Manager to get a Let's Encrypt certificate thinking surely it would...
View ArticlePlay sound message, after call is answered
@freeman wrote: hello . i have one sip trunk i want to all who will answer my call , first would be played somthingADs.wav file and after this standart customer and support conversation session.how...
View ArticleNo sound with MoH (Music On Hold)
@Dietermartens wrote: Hi everyone, I've a very complicated issue with freepbx/ asterisk. Since i've enabled Music On Hold in my ringgroup i've noticed that there is only sound on one side. Is there...
View ArticleClik here to view.
What ports does UCP Really use
@GSnover wrote: Pasted image838x214 19.2 KB All Ports at default and all ports open: But when I connect with UCP to port 81 I get this: Pasted image862x83 6.07 KB But if I sneak a rule in to allow all...
View Article