HA with FOP2
@mvogel4949 wrote: Has anyone ever successfully operated the FOP2 and HA at the same time? Any idea if I would need to change something in the fop2 config files in order to accommodate the floating...
View ArticleSyntax Error
@asifahmed009 wrote: UsingFree PBX 2.11Asterisk 11.24 Suddenly i m receiving these errors. [2017-03-14 16:13:51] WARNING[3731][C-000301c6]: ast_expr2.fl:470 ast_yyerror: ast_yyerror(): syntax error:...
View ArticleNetwork problems?
@iceget wrote: dear community, have this setup: 10.0.0.200 = FreePBX on our Datacenter192.168.0.1-5 = Phones outside, connected via VPN to the 10.0.0.0 Network All my snom phones are connected without...
View ArticleDiffenence in admin and user fields
@fropa wrote: Hi, I've freepbx-13.0.190.19-1 version with minimal configuration. I've done some test calls, some with call pickup and transfer and I've noticed that with admin and user cdr's are...
View ArticleClik here to view.
Unable to change network settings
@slim542 wrote: Hello Everyone, Im having trouble making changes to my network settings under system admin. When i click on network settings everything is grayed out and the network interface box just...
View ArticleCallerID include trunk name
@freeman wrote: hello . i have two freepbx machine .. connected via sip trunk... 1 .pbx1 ext range : 400-5002. pbx2 ext range : 100-200 for example : when i call from 150 ---->405 . call from 405 ,...
View ArticleExternal calls from ring group use wrong trunk
@macjacfish wrote: For after hours routing, I have a call flow control set that such that if it is after hours all calls are routed to a ring group which dials an external number for the answering...
View ArticleEPM cannot edit basefiles still
@chaptech wrote: Hi, Ive been fighting with EPM not being able to edit basefiles with a couple of versions now across multiple installs, i keep reading the bug is fixed but still there. I have also...
View ArticleStuck "Message/ast_msg_queu" channel
@batchen wrote: Hi, im using Asterisk 13.10.0 on Centos6 with freepbx-13.0.101every once in a while we get this stuck channel that its not really a call but a message.i cant hang this up without...
View ArticleForward call to external phone number if extension is not reachable
@iceget wrote: dear community, is this possible, if my vpn tunnel from my pbx to my phones was broken,that i forward all calls to a specific number? thanks! Posts: 5 Participants: 3 Read full topic
View ArticleIncoming Callers Cannot Hear Me, But I Can Hear Them
@travisryan123 wrote: Running FreePBX 13.0.190.19FreePBX Server Runs through pfsense to WANI have port 5060 NAT forwarded and I also have RTP ports forwarded to the FreePBX server.SIP Trunk setup and...
View ArticleManaging the owner of contact groups in freepbx administration web portal
@wolfer201 wrote: Is there way to change owners or make public a contact group that a user created in UCP from the contact manager admin interface. The only way I have been able to do it thus far is...
View ArticlePJSIP Remotely bridging over NAT
@gherbstman wrote: Yesterday our phones started performing a remote bridge between our outside network and inside network phones. These go thru a NAT firewall and have been working for a long time....
View ArticleRestoring a system at 13.11.16-19 from a 13.11.16-15 backup?
@mvogel4949 wrote: I am attempting to restore a system that is currently at 13.11.16-19 from a 13.11.16-15 backup. Is this not allowed? Posts: 2 Participants: 2 Read full topic
View ArticleDestination based on DID after Inbound Route
@carlosmp wrote: We have a situation for a client we're setting up, and have an opportunity to do a few more of these. In shared tenant spaces, there are 2+ sub tenants, who each have a DID. If a call...
View ArticleSmall delay with voice
@Bradbpw wrote: I'm experiencing about a 1/2 second delay when talking to others on the phone. This happens with external and internal calls. The delay is about the same with each. My jitter buffer is...
View ArticleOutbound CID is using wrong number
@n8techy wrote: I have one phone that is set to use outbound CID 720xxxxxxx. When calling out it comes up as a 303 number. I have logged directly into the phone and the Global Settings and Line 1 CID...
View ArticleSetting up a phone system for an 145 room hotel
@jehangt3 wrote: Hello, I would like anyone's expert opinion on an upcoming project I have I have a customer (145 room hotel & 10-12 employee extensions) who wants to replace their phone system...
View ArticleTime Condition Hint Not in Correct State
@crbowers wrote: We've got two time groups configured and two time conditions, Holiday and Office Hours. Call flow goes to Holiday time condition and if it matches they get a closed for holiday...
View ArticlePhones fail to make or receive calls
@ganda wrote: I am having a strange issue that I am not sure how to resolve. I have 4 phones (gxp1405) and every couple of weeks some of them sometimes 3 sometimes one, but so far not all 4, will stop...
View Article