Email notification won't be sent if it is configured via FreePBX GUI...
@domosute wrote: Hi, This might be a beginner question; however, after upgrading from FreePBX12 to FreePBX13, I noticed voicemail email notification stopped working. Currently it is cured by...
View ArticleClik here to view.
Inbound route does not work: check_auth: username mismatch
@DanielKi wrote: I have a freepbx server behind my router. The calls should pass through the router to my freepbx server and then forwarded back to the router.This works for outgoing calls. But every...
View ArticleUK Dial Patterns / No outgoing calls
@gilesogram wrote: Hello,I have just got FreePBX installed and configured with 4 SIP phones and all is well internally.I have got a registered SIP trunk setup, but having issues getting any external...
View ArticleHelp read this call log to determine how they are making fraudulent calls
@viziony wrote: Can someone please help me read the following log to determine how this caller is able to make outbound calls through our IVR? I thought I would post it while I am reviewing the log...
View ArticleMobile and Desktop Softphones
@jkessler123 wrote: Hello community, My company is looking to push out a branded SIP soft phone solution for PC's and Mobile Phones. So far we have been testing CounterPath's Bria and ZOIPER. Does...
View ArticleSIP from UDP to TCP- no audio
@Xanders wrote: Hello dear community,Please advise - when using standard chan_sip settings with UDP transport everything works perfectly, but when I change extension setting to use TCP (Transport...
View ArticleCID NUM Alias doesn't work for internal called number
@82002114 wrote: I create a extension 66766, CID NUM Alias is 6666. When I make a call to 6666, 66766 can ring, but when it answer, the number on my phone screen becomes 66766 from 6666.However when...
View ArticleClik here to view.
Using freepbx to offer residential voip
@tenenbaum wrote: I searched the forum and I saw this old post: community.freepbx.org Reselling VoIP / FreePBX We are a small ISP and would like to offer our residential and business customers VoIP....
View ArticleHTTP Provisioning - config file uploads
@moodinsk wrote: Hi, I am hoping this is a simple solution. I am using Polycom VVX phones and Commercial EPM to provision phones via HTTP. Everything is working great as far as pulling the config...
View ArticleAfter update can not access gui - freepbx-10.13.66-18
@vdifiore wrote: Hello everyone, After updating modules, with no apparent error, the only user that could enter the administration web was the one that was logged in at the time of updating.Detect...
View ArticleGrandsteam Gateway will not stay registered
@sentinelace wrote: I am using a grandsteam gateway. when I reboot it, it registers and works for like 2 minutes and then unregisters and can't connect. When I see this, NAT settings can be adjusted...
View ArticleUpcoming Module Expiration Error - Automated ticket
@dcitelecom wrote: I keep getting automated email notices about my "Upcoming Module Expiration" for the "Extension Routing" module. I started with the free one year license and then upgraded to the...
View ArticleAsterisk cloud
@antonioparadiso wrote: Hi, We have deployed the following scenario:An asterisk PBX over an MPLS link in a remote site with 100Mbps bandwidth.Ip phones and voice gateway, deployed locally with the...
View ArticleQueue Misc Destination?
@jerryriggin wrote: We are using freePBX distro 13.0.191.11 essentially as a switch. All inbound comes into freePBX, and then is sent to a SIP dialer, SIP IVR or digital PBX via Dahdi. This done by...
View ArticlePjsip diversion
@mitja wrote: Hello I was testing a FreePbx 13 with pjSip and I have some strange behavior.On call forwarding, there is no diversion header, I have enabled diversion in advanced settings and i can see...
View ArticleMaster.csv is not generated
@vgbltsk wrote: Dear all,I was about to enable simple call logging with using cdr_csv.so Asterisk module and did the following: Created /etc/asterisk/cdr.conf since it was missing and added the...
View ArticleCan't Install FreePBX on CentOS 7
@admin33 wrote: I am installing FreePBX 13 on CentOS 7. I get down to the very last two steps: ./start_asterisk start./install -nand after trying to run the second command the second one would fail...
View ArticleMultiple timezones
@Talal wrote: Hi, I'm considering moving from a Mitel system to FreePBX so I'm putting things together to make sure that I can match the configuration I have on the Mitel, one issue is that I have 2...
View Article*90 Feature not working (Call Forward Busy Activate)
@admin321 wrote: Hi, I have problems with some feature code. I would like to use Call Forward Busy Activate(*90), but it isn't work. I activated this code on one extension(600). For activate I dial...
View ArticleQueue Pause not working
@twohuck wrote: Queue Pause BLF light stopped working after upgrade from 6.12.65-32 to 10.13.66-19. The button still pauses the agent but they don't get the red BLF light. We are using Yealink T46G,...
View Article