Error: Trying to remove "sangoma-pbx", which is protected
@milauria wrote: Hi Community – I am trying to rum system updates on my Distro 12.7.4-1712-2.sng7 When running system updated from GUI or from yum update, I get the below error blocking the yum update...
View ArticleFreepbx 14 Connected Line update prevented and immediate hang up
@mlaihk wrote: I am using and OBI202 acting as an FXO for my Freepbx 14 (asterisk 14). Everything is connected via PJSIP, together with 3 SIP trunks to an ITSP. Everything works except for the OBI202...
View ArticleVPN server Freepbx
@frouty wrote: Hi, here is my config: My config on what I call -the LAN subnet: Main router TPLINK OpenWrt Chaos Calmer 15.05 Switch Cisco L3 VPN server on the openwrt 10.10.0.0 subnet port 1200 VPN...
View ArticleAsterisk with .NET Application
@nildson wrote: Dear all, my name is Nildson, i have been working in an application (.NET) in order to make call phone by voip (SIP protocol). We have a server connect (ISSABEL) and it’s working with...
View ArticlePJSIP Extensions with SIP Trunk
@bradm413 wrote: I’ve read a lot on the difference between PJSIP & SIP, and so far I haven’t found anything definitive on how they’re different – other than PJSIP is the newer driver. I haven’t...
View ArticleDialing Out on Different Lines
@bradm413 wrote: I am setting up a new PBX from scratch to replace our old Asterisk 1.8 server. In our old 1.8 setup, the dialplan is setup so that users have multiple SIP accounts that their phones...
View ArticleClik here to view.
Asterisk Authenticate audio question
@Mypbx wrote: Running FreePBX 14.0.1.24, asterisk 15.1.5 and again I’m happy. When using Authenticate I encounter unexpected audio which is not in line with my plan exten =>...
View ArticleBlock call by caller ID name?
@Riick370 wrote: I’m getting a ton of spam calls from some automated company, different caller ID number every time, different caller ID name every time, but they all start with V111 in the CNAME....
View ArticlePolycom Trio 8800
@dataspeed wrote: I have a Polycom Trio™ 8800 that I need to communicate with my freepbx server. Does anyone have any experience with this? I have been at this for hours and everything I run into...
View ArticleCodecs.conf doesn't seem to take effect?
@expresspotato wrote: Hi, So I decided to try out opus tonight, but for some reason I don’t seem to able to change the settings for it using codecs.conf. I know asterisk / freepbx is at least able to...
View ArticleDID Number pattern for inbound route
@firsttechvoip wrote: Good day Could someone please confirm if this DID Number range pattern is correct ? range is 0314508500 > 8699 _03145085[8699]X Thanks in advance Posts: 2 Participants: 2 Read...
View ArticleMysql default security: Access denied for user 'freepbxuser'@'localhost'
@AndreL wrote: I got this error: SQLSTATE[HY000] [1045] Access denied for user ‘freepbxuser’@‘localhost’ (using password: YES)::SQLSTATE[HY000] [1045] Access denied for user ‘freepbxuser’@‘localhost’...
View ArticleEndpoint Manager dismiss & in Line Keys Settings
@stegfeld wrote: using freepbx 14.0.1.24 endpoint manager 14.0.2.12 if you try to insert an & (e.g. http://127.0.0.1/dummy.htm?settings=save&user_active1=on) in the Line Keys Settings in...
View ArticlePaging Delay
@fiberconx wrote: Hi There. I have an issue with the FreePBX Paging abilities. Maybe someone else has seen this and is willing to offer some guidance… I have a customer with 9 offices globally. There...
View ArticleClik here to view.
VPN server couldn't register remote phone
@frouty wrote: Hi On my remote IP phone sangome s700 the account is not registered. On the freepbx: tail -f /var/log/messages: Jan 13 03:27:50 localhost openvpn[6538]: Initialization Sequence...
View ArticleDevices and Users mode users suddenly stopped getting calls
@wzkds wrote: FreePBX 13.0.192.19 Asterisk 13.17.0 I know it’s not a supported setup, but the client wanted devices and users mode functionality. I’m running into an issue several times today in which...
View ArticleDID Routing outside of 'Inbound Routes'
@cramermp wrote: Hey there. Using latest sangoma os distribution. I’m trying to add some call flow using inbound routes, time conditions, and ring groups. The client would like me to route calls to...
View ArticleBackup to a remote cloud server
@duncanidaho wrote: Is there a way to configure the backup to save these documents to a remote cloud server instead of the local machine? I can access from a remote GUI but not sure how to establish...
View ArticleClik here to view.
Music on Hold with a Yealink T46S phone
@jakecovert wrote: Good morning! I have a wonderful Yealink T46S phone, and it works great, but I’m having trouble with getting my FreePBX Music on Hold to work. I have just the default Music on Hold...
View ArticleClik here to view.
After latest update dahdi issues
@gfoxtrot wrote: Hi all, after the latest update on my freepbx server ,i get a dahdi error. I cannot understand why. I am not using dahdi module and my server opeartes nominally. Please see attached...
View Article