Fwconsole : Permission denied
@godinperson wrote: Hi, Did the manual update 10.13.66-7 from 10.13.66-6. Got a lot of Permission denied running it. I also did a module upgrade (framework) but can't apply the config. exit: 126sh:...
View ArticleNetworking issues
@ChadRT wrote: So I have a very perplexing issue here... I set the Static IP during install which went fine and even passed the internet check. But after the first boot following the installation it...
View ArticleCard not detected
@jimf wrote: Hello all. I have a system set up which I intend to use for a small multi room office set-up, all being well. I am having trouble getting the system to detect my X100P clone PCI modem...
View ArticleClik here to view.
CDR Reports extensive - Is it possible to minimize them?
@DanielYK wrote: At the following picture you see an CDR Report for one caller. The caller goes through an ivr and then to a queue with two members and one follow me. CDR.png2146x802 132 KB Is it...
View ArticleHelp with fwconsole
@jerryriggin wrote: Happily, I found (after being frustrated looking for an equivalent) that you can still run "amportal a s' to resync credentials between asterisk and freePBX in 13. It forwards the...
View ArticleSet extern ip via commandline
@DanielYK wrote: I have a public dynamic ip address. I want to write a script, which checks my external ip, updates the external_sip_address and external_media_address for pjsip and restarts asterisk....
View ArticleUsing Plivo with FreePBX / Asterisk
@ray123 wrote: I was trying to setup Plivo to be used as a SIP trunk with Asterisk / FreePBX. I couldn't find a comprehensive guide anywhere that described how to setup Plivo trunks. I found the...
View Articledahdi_test timing _way_ off on vmware esxi 5.5, severe audio chop
@cramermp wrote: Running FreePBX distro, 6.12.65 as a virtual machine. I'm having a heck of a time with the audio on this machine. Around the beginning of the year or so (can't pin it down due to lack...
View ArticleRouting LAN FreePBX and VoIP phones
@BryanH wrote: It's just a quick discussion and verification. in my case, I have a more then capable cisco router and cisco switches handling the package tagging and routing. Does having the FreePBX...
View ArticleProblem with delay in call setup
@gbrose wrote: FreePBX12 distro installation. Overall the system works. The problem is that both inbound and outbound calls have a 10 to 15 second delay between dialing the number and the first ring....
View ArticleClik here to view.
All calls are being recorded
@rsarceno wrote: Freepbx 13.0.51 ucprecord.png800x258 111 KB recording option.png983x311 23.2 KB I have several ext where the recording option is set the same (see pic). Out of 7 ext, one which is...
View ArticleMultiple Extensions Answering A Call?
@heifinator wrote: I am trying to figure out if there is anyway to meet this goal and cannot for the life of me figure out if this function exists! I need any of 20 extensions to be able to initiate a...
View ArticleIncoming calls
@Tomdspur wrote: Incoming calls can't hear us but we can her them. This occurs ramdomly. We have tried letting it ring twice before answer Posts: 2 Participants: 2 Read full topic
View ArticleBug or Design? Files erased automatically
@bhfisher wrote: Using PIAF Incredible PBX 13-12.2I'm not sure if ths a FreePBX or PIAF issue I have some scripts that play messages located in voicemail/default/(some extension number)/greet/.If I...
View ArticleNeed an Gigaset IP Phone. Suggestions?
@dineshvg wrote: Hey, I have an asterisk system setup on a remote server ( it's not behind NAT). My office router is a symmetric NAT. I have a TURN server setup remotely and I am using Zoiper...
View Articleretrieve_conf failed, config not applied
@florian__ wrote: Hi guys, I'm experimenting a retrieve_conf failed errorIt seems to follow a Digium Update from module admin.I waslooking to get back to the previous version, but the module seems not...
View ArticleIs Base station required for using Gigaset handsets?
@dineshvg wrote: Hey,I'm quite new to VOIP ... so, this question might seem basicI have been using softphones for a while with my asterisk system. I have decided to move to IP phones and started...
View ArticleAstcrapper Sound Files (anti-telemarketer)
@atcom wrote: Good day, does anyone have the astycrapper sound files? Jordan, hellos, etc... I believe the script and sound files were hosted at http://www.linuxsystems.com.au/astycrapper/index.html...
View ArticleIs there a way to automatically logout particular extension?
@domosute wrote: Hi,I am wondering whether particular extension(s) can be automatically logout in certain time (lets say 1:00am) or after certain period of login time. Is there such configuration...
View ArticleModule-Update from which URLs / IPs
@pbaeumel wrote: Hi all, I want to secure my FreePBX-System by only allowing connections to and from known IPs (SIP-Provider, Telephones and systemrelevat IPs). From which URLs (or better IPs) FreePBX...
View Article