Quantcast
Channel: General Help - FreePBX Community Forums
Viewing all 12620 articles
Browse latest View live
↧

Freepbx startup error

June 13, 2020, 1:08 am
$
0
0

@kashifiqb wrote:

One of our freepbx server, that serves agents locally over a LAN, started giving error as in attached image. What could be the reason for such an error? Any recovery steps? When this happens, we don’t have any other way to get it started and have to refresh the installation which is a difficult task as some servers are located at remote stations where internet speed is also not good.

dce74c62-4924-47e8-9c97-b1a19dd6990e
dce74c62-4924-47e8-9c97-b1a19dd6990e.jpeg1280×960 99.3 KB

Posts: 2

Participants: 2

Read full topic

↧
Search

Can FreePBX be configured so that Asterisk listens on a particualy IP address

June 13, 2020, 11:08 am
$
0
0

@byrnejb wrote:

We have a multi-homed FreePBX system. Is it possible to configure asterisk to only listen on specific IP address instead o 0.0.0.0?

Posts: 5

Participants: 2

Read full topic

↧
↧

Asternic > Call Center Stats > Migrate data from old to new server

June 14, 2020, 9:41 pm
↧

FreePBX/Asterisk Logging Cipher

June 2, 2020, 3:25 pm
$
0
0

@bluegill wrote:

Is there a logging cipher out there to help with reading FreePBX and Asterisk traces?

I was specifically looking at this trace to understand the “Spawn extension” parameters here:

[2020-06-02 12:49:03] VERBOSE[12081][C-0000002c] pbx.c: Spawn extension (ivr-1, s, 11) exited non-zero on ‘PJSIP/Trunk1-00000041’

ivr-1 | I assume this is the IVR object configured

s | maybe an exit object reference of some kind?

11 | maybe an exit code of some kind?

Posts: 5

Participants: 3

Read full topic

↧

Ibdata1 huge

June 15, 2020, 3:50 am
$
0
0

@wassy83 wrote:

Hi to all,
today I went out of space and things have become unresponsive, so I freed up some space deleting old logs anf things worked again. I noticed that this file /var/lib/mysql/ibdata1 is 12GB. Is there a way to reduce the size of this? freepbx is on a proxmox server with a disk of 32GB so the / partition is only 28GB. Many thanks

Posts: 1

Participants: 1

Read full topic

↧
↧

Fail gracefully if subscriber absent

June 15, 2020, 5:46 am
$
0
0

@pbx_noob wrote:

Is there anyway to get FreePBX to fail gracefully if a subscriber is ‘absent’? At the moment the call just rings 4 times or so then hangs up. It’s only by trawling through the logs that I can see what’s amiss.

For bonus points if the subscriber is absent it would be great if it could send an email or execute a local command so I can be notified something has gone wrong…

THANKS!

Posts: 1

Participants: 1

Read full topic

↧

Call forwarding not working to external/cell number

June 3, 2020, 12:35 am
$
0
0

@voipnewbe wrote:

Hi guys,

I have the freepbx 14 and grandstream phones and im unable to get the call forwarding working.

I have a pots line connected to dahdi and that is where im failing to get the call forwarding working. i have some debugs below, appreciate your help.

Regards,

-- Now forwarding DAHDI/1-1 to 'Local/9559082534@from-internal' (thanks to PJSIP/6491-00000132)
[2020-05-29 13:52:51] NOTICE[1867][C-0000012d]: app_dial.c:1000 do_forward: Not accepting call completion offers from call-forward recipient Local/9559082534@from-internal-00000170;1
-- Executing [9559082534@from-internal:1] Macro("Local/9559082534@from-internal-00000170;2", "user-callerid,LIMIT,EXTERNAL,") in new stack
-- Executing [s@macro-user-callerid:1] Set("Local/9559082534@from-internal-00000170;2", "TOUCH_MONITOR=1590760371.1302") in new stack
-- Executing [s@macro-user-callerid:2] Set("Local/9559082534@from-internal-00000170;2", "AMPUSER=") in new stack
-- Executing [s@macro-user-callerid:3] Set("Local/9559082534@from-internal-00000170;2", "HOTDESCKCHAN=9559082534@from-internal-00000170;2") in new stack
-- Executing [s@macro-user-callerid:4] Set("Local/9559082534@from-internal-00000170;2", "HOTDESKEXTEN=9559082534@from") in new stack
-- Executing [s@macro-user-callerid:5] Set("Local/9559082534@from-internal-00000170;2", "HOTDESKCALL=0") in new stack
-- Executing [s@macro-user-callerid:6] ExecIf("Local/9559082534@from-internal-00000170;2", "0?Set(HOTDESKCALL=1)") in new stack
-- Executing [s@macro-user-callerid:7] ExecIf("Local/9559082534@from-internal-00000170;2", "0?Set(CALLERID(name)=)") in new stack
-- Executing [s@macro-user-callerid:8] GotoIf("Local/9559082534@from-internal-00000170;2", "0?report") in new stack
-- Executing [s@macro-user-callerid:9] ExecIf("Local/9559082534@from-internal-00000170;2", "1?Set(REALCALLERIDNUM=)") in new stack
-- Executing [s@macro-user-callerid:10] Set("Local/9559082534@from-internal-00000170;2", "AMPUSER=") in new stack
-- Executing [s@macro-user-callerid:11] GotoIf("Local/9559082534@from-internal-00000170;2", "0?limit") in new stack
-- Executing [s@macro-user-callerid:12] Set("Local/9559082534@from-internal-00000170;2", "AMPUSERCIDNAME=") in new stack
-- Executing [s@macro-user-callerid:13] ExecIf("Local/9559082534@from-internal-00000170;2", "0?Set(__CIDMASQUERADING=TRUE)") in new stack
-- Executing [s@macro-user-callerid:14] GotoIf("Local/9559082534@from-internal-00000170;2", "1?report") in new stack
-- Goto (macro-user-callerid,s,28)
-- Executing [s@macro-user-callerid:28] NoOp("Local/9559082534@from-internal-00000170;2", "Macro Depth is 1") in new stack
-- Executing [s@macro-user-callerid:29] GotoIf("Local/9559082534@from-internal-00000170;2", "1?report2:macroerror") in new stack
-- Goto (macro-user-callerid,s,30)
-- Executing [s@macro-user-callerid:30] GotoIf("Local/9559082534@from-internal-00000170;2", "1?continue") in new stack
-- Goto (macro-user-callerid,s,49)
-- Executing [s@macro-user-callerid:49] Set("Local/9559082534@from-internal-00000170;2", "CALLERID(number)=") in new stack
-- Executing [s@macro-user-callerid:50] Set("Local/9559082534@from-internal-00000170;2", "CALLERID(name)=") in new stack
-- Executing [s@macro-user-callerid:51] GotoIf("Local/9559082534@from-internal-00000170;2", "1?cnum") in new stack
-- Goto (macro-user-callerid,s,53)
-- Executing [s@macro-user-callerid:53] Set("Local/9559082534@from-internal-00000170;2", "CDR(cnum)=") in new stack
-- Executing [s@macro-user-callerid:54] Set("Local/9559082534@from-internal-00000170;2", "CHANNEL(language)=en") in new stack
-- Executing [9559082534@from-internal:2] Gosub("Local/9559082534@from-internal-00000170;2", "sub-record-check,s,1(out,9559082534,dontcare)") in new stack
-- Executing [s@sub-record-check:1] GotoIf("Local/9559082534@from-internal-00000170;2", "0?initialized") in new stack
-- Executing [s@sub-record-check:2] Set("Local/9559082534@from-internal-00000170;2", "__REC_STATUS=INITIALIZED") in new stack
-- Executing [s@sub-record-check:3] Set("Local/9559082534@from-internal-00000170;2", "NOW=1590760371") in new stack
-- Executing [s@sub-record-check:4] Set("Local/9559082534@from-internal-00000170;2", "__DAY=29") in new stack
-- Executing [s@sub-record-check:5] Set("Local/9559082534@from-internal-00000170;2", "__MONTH=05") in new stack
-- Executing [s@sub-record-check:6] Set("Local/9559082534@from-internal-00000170;2", "__YEAR=2020") in new stack
-- Executing [s@sub-record-check:7] Set("Local/9559082534@from-internal-00000170;2", "__TIMESTR=20200529-135251") in new stack
-- Executing [s@sub-record-check:8] Set("Local/9559082534@from-internal-00000170;2", "__FROMEXTEN=unknown") in new stack
-- Executing [s@sub-record-check:9] Set("Local/9559082534@from-internal-00000170;2", "__MON_FMT=wav") in new stack
-- Executing [s@sub-record-check:10] NoOp("Local/9559082534@from-internal-00000170;2", "Recordings initialized") in new stack
-- Executing [s@sub-record-check:11] ExecIf("Local/9559082534@from-internal-00000170;2", "0?Set(ARG3=dontcare)") in new stack
-- Executing [s@sub-record-check:12] Set("Local/9559082534@from-internal-00000170;2", "REC_POLICY_MODE_SAVE=") in new stack
-- Executing [s@sub-record-check:13] ExecIf("Local/9559082534@from-internal-00000170;2", "0?Set(REC_STATUS=NO)") in new stack
-- Executing [s@sub-record-check:14] GotoIf("Local/9559082534@from-internal-00000170;2", "3?checkaction") in new stack
-- Goto (sub-record-check,s,17)
-- Executing [s@sub-record-check:17] GotoIf("Local/9559082534@from-internal-00000170;2", "1?sub-record-check,out,1") in new stack
-- Goto (sub-record-check,out,1)
-- Executing [out@sub-record-check:1] NoOp("Local/9559082534@from-internal-00000170;2", "Outbound Recording Check from unknown to 9559082534") in new stack
-- Executing [out@sub-record-check:2] Set("Local/9559082534@from-internal-00000170;2", "RECMODE=") in new stack
-- Executing [out@sub-record-check:3] ExecIf("Local/9559082534@from-internal-00000170;2", "1?Goto(routewins)") in new stack
-- Goto (sub-record-check,out,7)
-- Executing [out@sub-record-check:7] Gosub("Local/9559082534@from-internal-00000170;2", "recordcheck,1(dontcare,out,9559082534)") in new stack
-- Executing [recordcheck@sub-record-check:1] NoOp("Local/9559082534@from-internal-00000170;2", "Starting recording check against dontcare") in new stack
-- Executing [recordcheck@sub-record-check:2] Goto("Local/9559082534@from-internal-00000170;2", "dontcare") in new stack
-- Goto (sub-record-check,recordcheck,3)
-- Executing [recordcheck@sub-record-check:3] Return("Local/9559082534@from-internal-00000170;2", "") in new stack
-- Executing [out@sub-record-check:8] Return("Local/9559082534@from-internal-00000170;2", "") in new stack
-- Executing [9559082534@from-internal:3] ExecIf("Local/9559082534@from-internal-00000170;2", "0 ?Set(CDR(accountcode)=)") in new stack
-- Executing [9559082534@from-internal:4] Set("Local/9559082534@from-internal-00000170;2", "MOHCLASS=default") in new stack
-- Executing [9559082534@from-internal:5] Set("Local/9559082534@from-internal-00000170;2", "_NODEST=") in new stack
-- Executing [9559082534@from-internal:6] Macro("Local/9559082534@from-internal-00000170;2", "dialout-trunk,2,559082534,,off") in new stack
-- Executing [s@macro-dialout-trunk:1] Set("Local/9559082534@from-internal-00000170;2", "DIAL_TRUNK=2") in new stack
-- Executing [s@macro-dialout-trunk:2] ExecIf("Local/9559082534@from-internal-00000170;2", "1?Set(DIAL_OPTIONS=Hhtr)") in new stack
-- Executing [s@macro-dialout-trunk:3] GosubIf("Local/9559082534@from-internal-00000170;2", "0?sub-pincheck,s,1()") in new stack
-- Executing [s@macro-dialout-trunk:4] ExecIf("Local/9559082534@from-internal-00000170;2", "0?Set(CALLERID(num)=)") in new stack
-- Executing [s@macro-dialout-trunk:5] GotoIf("Local/9559082534@from-internal-00000170;2", "0?disabletrunk,1") in new stack
-- Executing [s@macro-dialout-trunk:6] Set("Local/9559082534@from-internal-00000170;2", "DIAL_NUMBER=559082534") in new stack
-- Executing [s@macro-dialout-trunk:7] Set("Local/9559082534@from-internal-00000170;2", "DIAL_TRUNK_OPTIONS=Hhtr") in new stack
-- Executing [s@macro-dialout-trunk:8] Set("Local/9559082534@from-internal-00000170;2", "OUTBOUND_GROUP=OUT_2") in new stack
-- Executing [s@macro-dialout-trunk:9] Set("Local/9559082534@from-internal-00000170;2", "DIAL_TRUNK_OPTIONS=T") in new stack
-- Executing [s@macro-dialout-trunk:10] GotoIf("Local/9559082534@from-internal-00000170;2", "0?nomax") in new stack
-- Executing [s@macro-dialout-trunk:11] GotoIf("Local/9559082534@from-internal-00000170;2", "0?chanfull") in new stack
-- Executing [s@macro-dialout-trunk:12] GotoIf("Local/9559082534@from-internal-00000170;2", "0?skipoutcid") in new stack
-- Executing [s@macro-dialout-trunk:13] Macro("Local/9559082534@from-internal-00000170;2", "outbound-callerid,2") in new stack
-- Executing [s@macro-outbound-callerid:1] NoOp("Local/9559082534@from-internal-00000170;2", "") in new stack
-- Executing [s@macro-outbound-callerid:2] NoOp("Local/9559082534@from-internal-00000170;2", "TRUE") in new stack
-- Executing [s@macro-outbound-callerid:3] NoOp("Local/9559082534@from-internal-00000170;2", "off") in new stack
-- Executing [s@macro-outbound-callerid:4] ExecIf("Local/9559082534@from-internal-00000170;2", "1?Set(CALLERPRES(name-pres)=allowed_not_screened)") in new stack
-- Executing [s@macro-outbound-callerid:5] ExecIf("Local/9559082534@from-internal-00000170;2", "1?Set(CALLERPRES(num-pres)=allowed_not_screened)") in new stack
-- Executing [s@macro-outbound-callerid:6] Set("Local/9559082534@from-internal-00000170;2", "HOTDESCKCHAN=9559082534@from-internal-00000170;2") in new stack
-- Executing [s@macro-outbound-callerid:7] Set("Local/9559082534@from-internal-00000170;2", "HOTDESKEXTEN=9559082534@from") in new stack
-- Executing [s@macro-outbound-callerid:8] Set("Local/9559082534@from-internal-00000170;2", "HOTDESKCALL=0") in new stack
-- Executing [s@macro-outbound-callerid:9] ExecIf("Local/9559082534@from-internal-00000170;2", "0?Set(HOTDESKCALL=1)") in new stack
-- Executing [s@macro-outbound-callerid:10] ExecIf("Local/9559082534@from-internal-00000170;2", "0?Set(CALLERID(name)=)") in new stack
-- Executing [s@macro-outbound-callerid:11] Set("Local/9559082534@from-internal-00000170;2", "ALLOWTHISROUTE=NO") in new stack
-- Executing [s@macro-outbound-callerid:12] ExecIf("Local/9559082534@from-internal-00000170;2", "0?Set(ALLOWTHISROUTE=YES)") in new stack
-- Executing [s@macro-outbound-callerid:13] ExecIf("Local/9559082534@from-internal-00000170;2", "0?Hangup()") in new stack
-- Executing [s@macro-outbound-callerid:14] ExecIf("Local/9559082534@from-internal-00000170;2", "1?Set(REALCALLERIDNUM=)") in new stack
-- Executing [s@macro-outbound-callerid:15] ExecIf("Local/9559082534@from-internal-00000170;2", "0?Set(AMPUSER=unknown)") in new stack
-- Executing [s@macro-outbound-callerid:16] GotoIf("Local/9559082534@from-internal-00000170;2", "1?normcid") in new stack
-- Goto (macro-outbound-callerid,s,20)
-- Executing [s@macro-outbound-callerid:20] Set("Local/9559082534@from-internal-00000170;2", "USEROUTCID=") in new stack
-- Executing [s@macro-outbound-callerid:21] Set("Local/9559082534@from-internal-00000170;2", "EMERGENCYCID=") in new stack
-- Executing [s@macro-outbound-callerid:22] ExecIf("Local/9559082534@from-internal-00000170;2", "0?Set(EMERGENCYCID=)") in new stack
-- Executing [s@macro-outbound-callerid:23] Set("Local/9559082534@from-internal-00000170;2", "TRUNKOUTCID=") in new stack
-- Executing [s@macro-outbound-callerid:24] GotoIf("Local/9559082534@from-internal-00000170;2", "1?trunkcid") in new stack
-- Goto (macro-outbound-callerid,s,30)
-- Executing [s@macro-outbound-callerid:30] ExecIf("Local/9559082534@from-internal-00000170;2", "0?Set(CALLERID(all)=)") in new stack
-- Executing [s@macro-outbound-callerid:31] ExecIf("Local/9559082534@from-internal-00000170;2", "0?Set(CALLERID(all)=)") in new stack
-- Executing [s@macro-outbound-callerid:32] ExecIf("Local/9559082534@from-internal-00000170;2", "0?Set(CALLERID(all)=)") in new stack
-- Executing [s@macro-outbound-callerid:33] ExecIf("Local/9559082534@from-internal-00000170;2", "0?Set(CALLERID(all)=)") in new stack
-- Executing [s@macro-outbound-callerid:34] Set("Local/9559082534@from-internal-00000170;2", "TIOHIDE=no") in new stack
-- Executing [s@macro-outbound-callerid:35] ExecIf("Local/9559082534@from-internal-00000170;2", "0?Set(CALLERPRES(name-pres)=prohib_passed_screen)") in new stack
-- Executing [s@macro-outbound-callerid:36] ExecIf("Local/9559082534@from-internal-00000170;2", "0?Set(CALLERPRES(num-pres)=prohib_passed_screen)") in new stack
-- Executing [s@macro-outbound-callerid:37] ExecIf("Local/9559082534@from-internal-00000170;2", "0?Set(CALLERPRES(name-pres)=prohib_passed_screen)") in new stack
-- Executing [s@macro-outbound-callerid:38] ExecIf("Local/9559082534@from-internal-00000170;2", "0?Set(CALLERPRES(num-pres)=prohib_passed_screen)") in new stack
-- Executing [s@macro-outbound-callerid:39] Set("Local/9559082534@from-internal-00000170;2", "CDR(outbound_cnum)=") in new stack
-- Executing [s@macro-outbound-callerid:40] Set("Local/9559082534@from-internal-00000170;2", "CDR(outbound_cnam)=") in new stack
-- Executing [s@macro-dialout-trunk:14] GosubIf("Local/9559082534@from-internal-00000170;2", "0?sub-flp-2,s,1()") in new stack
-- Executing [s@macro-dialout-trunk:15] Set("Local/9559082534@from-internal-00000170;2", "OUTNUM=559082534") in new stack
-- Executing [s@macro-dialout-trunk:16] Set("Local/9559082534@from-internal-00000170;2", "custom=DAHDI/r0") in new stack
-- Executing [s@macro-dialout-trunk:17] ExecIf("Local/9559082534@from-internal-00000170;2", "0?Set(DIAL_TRUNK_OPTIONS=M(setmusic^default)T)") in new stack
-- Executing [s@macro-dialout-trunk:18] ExecIf("Local/9559082534@from-internal-00000170;2", "0?Set(DIAL_TRUNK_OPTIONS=TM(confirm))") in new stack
-- Executing [s@macro-dialout-trunk:19] Macro("Local/9559082534@from-internal-00000170;2", "dialout-trunk-predial-hook,") in new stack
-- Executing [s@macro-dialout-trunk-predial-hook:1] MacroExit("Local/9559082534@from-internal-00000170;2", "") in new stack
-- Executing [s@macro-dialout-trunk:20] GotoIf("Local/9559082534@from-internal-00000170;2", "0?bypass,1") in new stack
-- Executing [s@macro-dialout-trunk:21] ExecIf("Local/9559082534@from-internal-00000170;2", "0?Set(CONNECTEDLINE(num,i)=559082534)") in new stack
-- Executing [s@macro-dialout-trunk:22] ExecIf("Local/9559082534@from-internal-00000170;2", "0?Set(CONNECTEDLINE(name,i)=CID:)") in new stack
-- Executing [s@macro-dialout-trunk:23] ExecIf("Local/9559082534@from-internal-00000170;2", "0?Set(CONNECTEDLINE(name,i)=CID:(Hidden))") in new stack
-- Executing [s@macro-dialout-trunk:24] GotoIf("Local/9559082534@from-internal-00000170;2", "0?customtrunk") in new stack
-- Executing [s@macro-dialout-trunk:25] ExecIf("Local/9559082534@from-internal-00000170;2", "1?Set(DIAL_TRUNK_OPTIONS=)") in new stack
-- Executing [s@macro-dialout-trunk:26] Dial("Local/9559082534@from-internal-00000170;2", "DAHDI/r0/559082534,300,b(func-apply-sipheaders^s^1,(2))") in new stack
[2020-05-29 13:52:51] WARNING[1879][C-0000012d]: app_dial.c:2525 dial_exec_full: Unable to create channel of type 'DAHDI' (cause 34 - Circuit/channel congestion)
  == Everyone is busy/congested at this time (1:0/1/0)
-- Executing [s@macro-dialout-trunk:27] NoOp("Local/9559082534@from-internal-00000170;2", "Dial failed for some reason with DIALSTATUS = CONGESTION and HANGUPCAUSE = 34") in new stack
-- Executing [s@macro-dialout-trunk:28] GotoIf("Local/9559082534@from-internal-00000170;2", "0?continue,1:s-CONGESTION,1") in new stack
-- Goto (macro-dialout-trunk,s-CONGESTION,1)
-- Executing [s-CONGESTION@macro-dialout-trunk:1] Set("Local/9559082534@from-internal-00000170;2", "RC=34") in new stack
-- Executing [s-CONGESTION@macro-dialout-trunk:2] Goto("Local/9559082534@from-internal-00000170;2", "34,1") in new stack
-- Goto (macro-dialout-trunk,34,1)
-- Executing [34@macro-dialout-trunk:1] Goto("Local/9559082534@from-internal-00000170;2", "continue,1") in new stack
-- Goto (macro-dialout-trunk,continue,1)
-- Executing [continue@macro-dialout-trunk:1] NoOp("Local/9559082534@from-internal-00000170;2", "TRUNK Dial failed due to CONGESTION HANGUPCAUSE: 34 - failing through to other trunks") in new stack
-- Executing [continue@macro-dialout-trunk:2] ExecIf("Local/9559082534@from-internal-00000170;2", "0?Set(CALLERID(number)=)") in new stack
-- Executing [9559082534@from-internal:7] Macro("Local/9559082534@from-internal-00000170;2", "outisbusy,") in new stack
-- Executing [s@macro-outisbusy:1] Progress("Local/9559082534@from-internal-00000170;2", "") in new stack
-- Executing [s@macro-outisbusy:2] GotoIf("Local/9559082534@from-internal-00000170;2", "0?emergency,1") in new stack
-- Executing [s@macro-outisbusy:3] GotoIf("Local/9559082534@from-internal-00000170;2", "0?intracompany,1") in new stack
-- Executing [s@macro-outisbusy:4] Playback("Local/9559082534@from-internal-00000170;2", "all-circuits-busy-now&please-try-call-later, noanswer") in new stack
-- <Local/9559082534@from-internal-00000170;2> Playing 'all-circuits-busy-now.ulaw' (language 'en')
-- Local/9559082534@from-internal-00000170;1 is making progress passing it to DAHDI/1-1

Posts: 8

Participants: 2

Read full topic

↧

SIP header blank?

June 15, 2020, 7:25 am
$
0
0

@egroeg wrote:

Problem: Asterisk adds the SIP header Jitsi-Conference-Room:
We are recording a PIN to ${Pin}, but the variable ${JITSI} is not being updated inside Asterisk.

[2020-05-18 11:45:53] VERBOSE[8447] pbx.c:     -- Executing [800@from-did-direct:2] Read("SIP/mediatrix-000350f8", "Pin,"custom/jitsi"") in new stack
[2020-05-18 11:45:53] VERBOSE[8447] pbx.c:     -- Executing [800@from-did-direct:2] Read("SIP/mediatrix-000350f8", "Pin,"custom/jitsi"") in new stack
[2020-05-18 11:45:53] VERBOSE[8447] file.c:     -- <SIP/mediatrix-000350f8> Playing 'custom/jitsi.slin' (language 'en')
[2020-05-18 11:45:53] VERBOSE[8447] file.c:     -- <SIP/mediatrix-000350f8> Playing 'custom/jitsi.slin' (language 'en')
[2020-05-18 11:46:01] VERBOSE[8447] app_read.c:     -- User entered '55555555'
[2020-05-18 11:46:01] VERBOSE[8447] app_read.c:     -- User entered '55555555'
[2020-05-18 11:46:01] VERBOSE[8447] pbx.c:     -- Executing [800@from-did-direct:3] Verbose("SIP/mediatrix-000350f8", "result is: 55555555") in new stack
[2020-05-18 11:46:01] VERBOSE[8447] pbx.c:     -- Executing [800@from-did-direct:3] Verbose("SIP/mediatrix-000350f8", "result is: 55555555") in new stack
[2020-05-18 11:46:01] VERBOSE[8447] app_verbose.c: result is: 55555555
[2020-05-18 11:46:01] VERBOSE[8447] app_verbose.c: result is: 55555555
// Here we read in the PIN and are passing it to the AGI script.  Running manually returns the desired conference info. (Shown below)
[2020-05-18 11:46:01] VERBOSE[8447] pbx.c:     -- Executing [800@from-did-direct:4] AGI("SIP/mediatrix-000350f8", "jitsi_curling.sh,55555555") in new stack
[2020-05-18 11:46:01] VERBOSE[8447] pbx.c:     -- Executing [800@from-did-direct:4] AGI("SIP/mediatrix-000350f8", "jitsi_curling.sh,55555555") in new stack
[2020-05-18 11:46:01] VERBOSE[8447] res_agi.c:     -- Launched AGI Script /var/lib/asterisk/agi-bin/jitsi_curling.sh
[2020-05-18 11:46:01] VERBOSE[8447] res_agi.c:     -- Launched AGI Script /var/lib/asterisk/agi-bin/jitsi_curling.sh
[2020-05-18 11:46:01] VERBOSE[8447] res_agi.c:     -- <SIP/mediatrix-000750f8>AGI Script jitsi_curling.sh completed, returning 0
[2020-05-18 11:46:01] VERBOSE[8447] res_agi.c:     -- <SIP/mediatrix-000750f8>AGI Script jitsi_curling.sh completed, returning 0
--> [2020-05-18 11:46:01] VERBOSE[8447] pbx.c:     -- Executing [800@from-did-direct:5] Verbose("SIP/mediatrix-000350f8", "result is: ") in new stack
--> [2020-05-18 11:46:01] VERBOSE[8447] pbx.c:     -- Executing [800@from-did-direct:5] Verbose("SIP/mediatrix-000350f8", "result is: ") in new stack
// SET VARIABLE JITSI??????  This is not working....  Result is empty.
[2020-05-18 11:46:01] VERBOSE[8447] app_verbose.c: result is:
[2020-05-18 11:46:01] VERBOSE[8447] app_verbose.c: result is:
//SIPAddHeader is adding the Jitsi header, but w/o the result 
[2020-05-18 11:46:01] VERBOSE[8447] pbx.c:     -- Executing [800@from-did-direct:6] SIPAddHeader("SIP/mediatrix-000350f8", "Jitsi-Conference-Room: ") in new stack
[2020-05-18 11:46:01] VERBOSE[8447] pbx.c:     -- Executing [800@from-did-direct:6] SIPAddHeader("SIP/mediatrix-000350f8", "Jitsi-Conference-Room: ") in new stack
// We set the SIP header correctly, but it is blank.
[2020-05-18 11:46:01] VERBOSE[8447] pbx.c:     -- Executing [800@from-did-direct:7] Macro("SIP/mediatrix-000350f8", "exten-vm,novm,800,0,0,0") in new stack
[2020-05-18 11:46:01] VERBOSE[8447] pbx.c:     -- Executing [800@from-did-direct:7] Macro("SIP/mediatrix-000350f8", "exten-vm,novm,800,0,0,0") in new stack

Manually, can map conferences perfectly:

[root@pbx ~]# /var/lib/asterisk/agi-bin/jitsi_curling.sh 459802518

SET VARIABLE JITSI “jealouswolvescrawlcuriously”
-or-
SET VARIABLE JITSI “false”

Extension 800 in /etc/asterisk/extensions_override_freepbx.conf is this:

[ext-local]
exten => 800,1,Set(__RINGTIMER=${IF($["${DB(AMPUSER/800/ringtimer)}" > "0"]?${DB(AMPUSER/800/ringtimer)}:${RINGTIMER_DEFAULT})})
exten => 800,2,Read(Pin,"custom/jitsi")
exten => 800,3,Verbose(result is: ${Pin})
exten => 800,4,AGI(jitsi_curling.sh,${Pin})
exten => 800,5,Verbose(result is: ${JITSI})
exten => 800,6,SIPAddHeader(Jitsi-Conference-Room: ${JITSI})
exten => 800,7,Macro(exten-vm,novm,800,0,0,0)
exten => 800,8(dest),Set(__PICKUPMARK=)
exten => 800,9,Goto(${IVR_CONTEXT},return,1)
exten => 800,hint,SIP/800&Custom:DND800,CustomPresence:800

Posts: 1

Participants: 1

Read full topic

↧
Search

FreePBX Unauthorized Calls

June 15, 2020, 10:03 am
$
0
0

@anlm wrote:

So I inherited a PBX system which for the most part has not given me much issue… until this weekend…

I had a notice of significant charges from our service provider… I did some digging… looks at CDRs and had a TON of calls “from-trunk” and calls from random numbers… they appear to mostly if not all last for approximately 13 seconds…

I did learn through reading that there are two levels of anonymous access…

Allow Anonymous Inbound SIP Calls - was set to NO still set to NO
Allow SIP Guests - was set to YES has since been changed to NO

I notice now that my CDRs have dropped to a fraction of what they were… like over a similar sample size 10,000+ records to 30 records… more importantly the 30 records appear to be legitimate records…

I am waiting on the call detail from the service provider… but I am expecting a million 12 second calls…

can someone explain to me what these are? how this happens? I need to be able to correctly explain this to senior management…

YES the PBX is open to the internet…
YES we are looking at changing that…

but for now I have to at least be able to understand exactly what happened… and I dont think I fully get it…

any help would be really appreciated…

Posts: 2

Participants: 2

Read full topic

↧
↧

Brand new to FreePBX

June 15, 2020, 3:02 pm
$
0
0

@CalumMcM wrote:

Hi all,
Hope all is well, I am brand new to free PBX so please be patient , I have a lot of experience with more traditional systems, Avaya, Panasonic etc however I wanted to give this a try,
I have created a freepbx server on digitalocean and can access it etc, however I seem to need to keep stopping the inbuilt firewall every so often as it kicks me off regularly, I am doing this from the SSH console. How can I keep this inbuilt firewall enabled with allowing me HTTP/HTTPS access to the configuration page?
My other question is regarding extensions, I am struggling to register an extension, I see there is multiple types, I have tried PJSIP and CHANSIP with my snom820 handset I have lying around to little success, I believe I have opened the relevant ports for this also. Could someone explain what all the different extensions mean?
I’m sure once I have a phone registered I will have more questions, the full interface seems a lot more complex than what I had expected!
Thanks

Calum

Posts: 1

Participants: 1

Read full topic

↧

Login/logout - User & Devices Mode - Bulk Handler

June 16, 2020, 5:26 am
$
0
0

@marcm wrote:

Hello

I have one target and 2 questions:

80 users and 50 hardphones (Yealink T42G), softphones on mobiles as soon as the hard part works.
10 users are always sitting at the same desk so they have their own phone.
Other users will come at the office, sit where a desk is free and I would like them to login and use the phone which is on that desk for the time they stay.

Q1) Am I wrong when I set “User & Devices Mode” for this scenario ?

Q2) in User & Devices Mode
I would like to use BulkHandler to upload Users and Device as they are independent in this mode.
Will it just work ? or will it load Extensions (1 User and 1 Device for each record at the same time) ? Maybe deleting after loading to much is good enough.

Thanks

Posts: 1

Participants: 1

Read full topic

↧

FreePBX v13 Trunk disconnects provider

June 16, 2020, 9:08 am
$
0
0

@XcamaroX wrote:

Hello fellows,

Starting this morning all the v13 distros un-registered from the VoIP provider. After restart it re-registers for 1 minute then it un-registers again.

My v15 box did this as well, but after I connected to CLI I updated via yum update and after restarting it worked. My v13 dont give me that warning.

Any idea? Is this something related to a key?

TIA!

Posts: 1

Participants: 1

Read full topic

↧

Phone Registration History

June 3, 2020, 9:38 pm
$
0
0

@toborgps wrote:

Hello everyone!

So long story short here. One of our clients packages was potentially stolen. Now if it was stolen and the phones plugged in correctly (which is a long short I know) it should connect to the remote server it was setup to. Is there any way to see past registrations in FreePBX logs without going through 100’s of thousands of entries?

Posts: 6

Participants: 5

Read full topic

↧
↧

Hot Desking - Replacing own BLF

June 16, 2020, 10:16 pm
$
0
0

@bmartindcs wrote:

I’ve been playing with hot desking via log in/out. All that works fine, no issues there.

My challenge is that when using traditional extension mapping where you map an extension to a phone manually, you can tell the phone to substitute your extension with a different one.

I see no way to do that when using hot desking. Not sure why this couldn’t work, so hoping I am just missing something.

Any ideas?

Posts: 1

Participants: 1

Read full topic

↧

Default codecs

June 17, 2020, 2:03 am
$
0
0

@marcm wrote:

Hi

I have no audio except if I set an allowed codecs string for each device (g722&alaw&g729).
The default audio codecs checked on General SIP settings is not applied.

Is this the expected behavior ?

I remember having found the advice long time ago when I started creating PJSIP extensions in a mixed envt mainly CHANSIP, a couple of PJSIP.

FreePBX 15.0.16.53
D&U mode set. Checking if it does work for me.

Thx
Marc

Posts: 1

Participants: 1

Read full topic

↧
Search

Question about hotdesking

June 17, 2020, 1:23 am
↧

List remote logons

June 17, 2020, 6:15 am
$
0
0

@byrnejb wrote:

We employ users + devices. Each user has a desk-set and a remote softphone configured as devices. The desk-sest are automatically logged on as soon as they are connected to the LAN. I can see these in the Settings -> Extension Settings list. Where can I get a list of all the remote devices logon statuses?

Posts: 1

Participants: 1

Read full topic

↧
↧

New to PJSIP - Allow transport Reload?

June 17, 2020, 8:55 am
$
0
0

@mvogel4949 wrote:

I’m starting to move to pjsip and had a hosted install this morning where I wasn’t receiving audio. I set Allow transport Reload to yes and audio worked. Is this normal and I see a warning telling me this is not a good idea. What are the potential issues of this change? Thank you

Posts: 2

Participants: 2

Read full topic

↧

Sangoma Phone not getting IP after downloading FreePBX config

June 17, 2020, 7:39 pm
$
0
0

@w14219 wrote:

Installed new FreePBX server: FreePBX 15.0.16.53
Running Sangoma: 305 and 705 phones
VLAN Voice: 701 -tagged
VLAN data: 1 - not tagged

When phone is provisioned from the server, the phone will not bind to an IP. The DHCP server is offering an IP, but the phone is not taking it. Sangoma support believes the issue is with the PBX configuration.

I have tried to set both vlans to 701 and am still seeing the same issue.

I was able to pull some logs from a phone that was having issues, I do not know what to make of the data.

3 hours of the same error:

=====
[06-17 18:16:32 52:d8:80] Create Udp Socket: SrcIp=0xc0a807c6 SrcPort=12162 Pno=65535 Event=32 NetId=0x1001f…
[06-17 18:16:32 52:d8:80] Create Udp Socket: SrcIp=0xc0a807c6 SrcPort=12163 Pno=65535 Event=25 NetId=0x1001f…
[06-17 18:16:32 52:d8:80] MS:IniNodeSocket OK
[06-17 18:16:32 52:d8:80] Create Udp Socket: SrcIp=0xc0a807c6 SrcPort=12164 Pno=65535 Event=32 NetId=0x10020…
[06-17 18:16:32 52:d8:80] Create Udp Socket: SrcIp=0xc0a807c6 SrcPort=12165 Pno=65535 Event=25 NetId=0x10020…
[06-17 18:16:32 52:d8:80] MS:IniNodeSocket OK
[06-17 18:16:32 52:d8:80] Create Udp Socket: SrcIp=0xc0a807c6 SrcPort=12166 Pno=65535 Event=32 NetId=0x10021…

Then this works after 3 hours:

[06-17 18:16:32 52:d8:80] MS:IniNodeSocket OK
[06-17 18:16:32 52:d8:80] MSDspLibIni …
[06-17 18:16:32 52:d8:80] Ti3100: dac_samlpe_hz is 8000 already
[06-17 18:16:32 52:d8:80] BSP: SetCodec 8KHz
[06-17 18:16:32 52:d8:80] MSToneLibInit …
[06-17 18:16:32 52:d8:80] MS: TONE_INDEX_RING_MUTE TotalLen 1600 Load OK
[06-17 18:16:32 52:d8:80] ######### Read Ring1 file len 48000
[06-17 18:16:32 52:d8:80] MS: ToneId 90 Load OK
[06-17 18:16:32 52:d8:80] ######### Read Ring2 file len 40000
[06-17 18:16:32 52:d8:80] MS: ToneId 91 Load OK
[06-17 18:16:32 52:d8:80] ######### Read Ring3 file len 40000
[06-17 18:16:32 52:d8:80] MS: ToneId 92 Load OK
[06-17 18:16:32 52:d8:80] ######### Read Ring4 file len 131072
[06-17 18:16:32 52:d8:80] MS: ToneId 93 Load OK
[06-17 18:16:32 52:d8:80] ######### Read Ring5 file len 131072
[06-17 18:16:32 52:d8:80] MS: ToneId 94 Load OK
[06-17 18:16:32 52:d8:80] Read Ring File: Open ring file /etc_ro/res/ring6.bin fail! fd -1
[06-17 18:16:32 52:d8:80] Read Ring File: Open ring file /etc_ro/res/ring7.bin fail! fd -1
[06-17 18:16:32 52:d8:80] Read Ring File: Open ring file /etc_ro/res/ring8.bin fail! fd -1
[06-17 18:16:32 52:d8:80] ######### Read Test g722 file len 34816
[06-17 18:16:32 52:d8:80] MSConfLibInit …
[06-17 18:16:32 52:d8:80] InitPnP …
[06-17 18:16:32 52:d8:80] InitSche …
[06-17 18:16:32 52:d8:80] CreatSchTask: PNO 4, TaskId 8 OK
[06-17 18:16:32 52:d8:80] CreatSchTask: PNO 5, TaskId 9 OK
[06-17 18:16:32 52:d8:80] CreatSchTask: PNO 6, TaskId 10 OK
[06-17 18:16:32 52:d8:80] CreatSchTask: PNO 8, TaskId 11 OK
[06-17 18:16:32 52:d8:80] CreatSchTask: PNO 9, TaskId 12 OK
[06-17 18:16:32 52:d8:80] CreatSchTask: PNO 10, TaskId 13 OK
[06-17 18:16:32 52:d8:80] CreatSchTask: PNO 13, TaskId 14 OK
[06-17 18:16:32 52:d8:80] ScheOne Initialized success!
[06-17 18:16:32 52:d8:80] OSS system Initialized success!
[06-17 18:16:32 52:d8:80] upgrade_thread Task Start…
[06-17 18:16:32 52:d8:80] Web server Task Start…
[06-17 18:16:32 52:d8:80] HLGetDNS Task Start…
[06-17 18:16:32 52:d8:80] HLStun Task Start…
[06-17 18:16:32 52:d8:80] LLDP Task Start…
[06-17 18:16:32 52:d8:80] PCAP Task Start…
[06-17 18:16:32 52:d8:80] Action URL Task Start…
[06-17 18:16:32 52:d8:80] TR069 Task Start…
[06-17 18:16:32 52:d8:80] HL EHS MODE…
[06-17 18:16:32 52:d8:80] Check IP Conflict Task Start…
[06-17 18:16:32 52:d8:80] CDP Task Start…
[06-17 18:16:32 52:d8:80] Create Udp Socket: SrcIp=0xc0a807c6 SrcPort=161 Pno=65535 Event=34 NetId=0x0…
[06-17 18:16:32 52:d8:80] Create Udp Socket: SrcIp=0x 0 SrcPort=65516 Pno=65535 Event=37 NetId=0x0…
[06-17 18:16:32 52:d8:80] InitUDPSocket PlanetUdpRevEvent
[06-17 18:16:32 52:d8:80] Planet InitUDPSocket OK!
[06-17 18:16:32 52:d8:80] Planet Create UDP Socket OK!
[06-17 18:16:32 52:d8:80] Create Udp Socket: SrcIp=0xc0a807c6 SrcPort=60000 Pno=17200 Event=4115 NetId=0x80000008…
[06-17 18:16:32 52:d8:80] SIP Process Start…
[06-17 18:16:32 52:d8:80] SIP: sip trace init …
[06-17 18:16:32 52:d8:80] SIP: aid 0 RegTimer Start…
[06-17 18:16:32 52:d8:80] SIP: aid 1 RegTimer Start…
[06-17 18:16:32 52:d8:80] SIP: aid 2 RegTimer Start…
[06-17 18:16:32 52:d8:80] SIP: aid 3 RegTimer Start…
[06-17 18:16:32 52:d8:80] MultiCast Paging Init Start …
[06-17 18:16:32 52:d8:80] iNet: resolv.conf: nameserver 8.8.8.8
[06-17 18:16:32 52:d8:80] iNet: GetDns from resolv.conf: 8.8.8.8
[06-17 18:16:32 52:d8:80] iNet: resolv.conf: nameserver 8.8.8.8
[06-17 18:16:32 52:d8:80] iNet: resolv.conf: nameserver 192.168.7.1
[06-17 18:16:32 52:d8:80] iNet: GetDns from resolv.conf: 192.168.7.1
[06-17 18:16:32 52:d8:80] iNet: DHCP Get IP 0xc0a807c6, GW 0xc0a80701, NetMask 0xffffff00, DNS1 0x8080808, DNS2 0xc0a80701
[06-17 18:16:32 52:d8:80] dhcpcSetIP2CfgCallBack:6896======>>>>>dst->BasicIPAddr=192.168.7.198
[06-17 18:16:32 52:d8:80] CFG1: aid 1, set to invalid
[06-17 18:16:32 52:d8:80]

[06-17 18:16:32 52:d8:80] WanIPMode: DHCP
[06-17 18:16:32 52:d8:80] Wan IP Address: 192.168.7.198
[06-17 18:16:32 52:d8:80] Wan IP Netmask: 255.255.255.0
[06-17 18:16:32 52:d8:80] Wan IP NextHop: 192.168.7.1
[06-17 18:16:32 52:d8:80]
[06-17 18:16:32 52:d8:80] DNS Server 1 : 8.8.8.8
[06-17 18:16:32 52:d8:80] DNS Server 2 : 192.168.7.1
[06-17 18:16:32 52:d8:80] DNSSpecialSer : 0.0.0.0
[06-17 18:16:32 52:d8:80]
[06-17 18:16:32 52:d8:80] NTP Server :
[06-17 18:16:32 52:d8:80]
[06-17 18:16:32 52:d8:80] dwTimeOffset : 0
[06-17 18:16:32 52:d8:80] DHCP_TFTPSerName:
[06-17 18:16:32 52:d8:80] DHCP_TFTPSer :
[06-17 18:16:32 52:d8:80] DHCP_NTPSer :
[06-17 18:16:32 52:d8:80]

[06-17 18:16:32 52:d8:80] LCMEntry…
[06-17 18:16:32 52:d8:80] IniSipMcastUdp: Create UdpSocket OK pos 91!!!
[06-17 18:16:32 52:d8:80] Xmpp Control Process Start…
[06-17 18:16:32 52:d8:80] CALL: Call Control Process Start…
[06-17 18:16:32 52:d8:80] MSDspStopMute:2119####
[06-17 18:16:32 52:d8:80] Xmpp Loop Task Start …
[06-17 18:16:32 52:d8:80] Bluetooth Scan Task Start …
[06-17 18:16:32 52:d8:80] server_contact_photo Task Start …
[06-17 18:16:32 52:d8:80] WIFI contrl Start …
[06-17 18:16:32 52:d8:80] chn=0, AEC_switch = 0
[06-17 18:16:32 52:d8:80] MS: Chn 0 MSDspStopSendRev
[06-17 18:16:32 52:d8:80] FXS Call Control Process Start…
[06-17 18:16:32 52:d8:80] Chn 0 digitmap: x+#|xx+*
[06-17 18:16:32 52:d8:80] Chn 0 use default digitmap: {[x*]+}
[06-17 18:16:32 52:d8:80] Chn 1 digitmap: x+#|xx+*
[06-17 18:16:32 52:d8:80] Chn 1 use default digitmap: {[x*]+}
[06-17 18:16:32 52:d8:80] Chn 2 digitmap: x+#|xx+*
[06-17 18:16:32 52:d8:80] Chn 2 use default digitmap: {[x*]+}
[06-17 18:16:32 52:d8:80] Chn 3 digitmap: x+#|xx+*
[06-17 18:16:32 52:d8:80] Chn 3 use default digitmap: {[x*]+}
[06-17 18:16:32 52:d8:80] SIP Detect Control Process Start…
[06-17 18:16:32 52:d8:80] Create Udp Socket: SrcIp=0xc0a807c6 SrcPort=65500 Pno=13 Event=4213 NetId=0x80000000…
[06-17 18:16:32 52:d8:80] 305 DO NOT NEED TO RUN EHS MODE
[06-17 18:16:32 52:d8:80] SipDetect_InitSocket: Create UdpSocket OK pos 92 aid 0!!!
[06-17 18:16:32 52:d8:80] Create Udp Socket: SrcIp=0xc0a807c6 SrcPort=65501 Pno=13 Event=4213 NetId=0x80000001…
[06-17 18:16:32 52:d8:80] SipDetect_InitSocket: Create UdpSocket OK pos 93 aid 1!!!
[06-17 18:16:32 52:d8:80] Create Udp Socket: SrcIp=0xc0a807c6 SrcPort=65502 Pno=13 Event=4213 NetId=0x80000002…
[06-17 18:16:32 52:d8:80] SipDetect_InitSocket: Create UdpSocket OK pos 94 aid 2!!!
[06-17 18:16:32 52:d8:80] Create Udp Socket: SrcIp=0xc0a807c6 SrcPort=65503 Pno=13 Event=4213 NetId=0x80000003…
[06-17 18:16:32 52:d8:80] SipDetect_InitSocket: Create UdpSocket OK pos 95 aid 3!!!
[06-17 18:16:32 52:d8:80] sip tcp lib init: Start SipTcp ScanTask OK!!!
[06-17 18:16:32 52:d8:80] sip tcp lib init: Start SipTcp ProTask OK!!!
[06-17 18:16:32 52:d8:80] TLS: Load All TrustedCert …
[06-17 18:16:32 52:d8:80] TLS: commonName: Sangoma Root Certificate Authority
[06-17 18:16:32 52:d8:80]
CheckCAFile: File /hlfs/ca/ca0.pem, Check OK:
[06-17 18:16:32 52:d8:80] =======================================================
[06-17 18:16:32 52:d8:80] issuer country: CA
[06-17 18:16:32 52:d8:80] issuer state: Ontario
[06-17 18:16:32 52:d8:80] issuer locality: Toronto
[06-17 18:16:32 52:d8:80] issuer organization: Sangoma Corporation
[06-17 18:16:32 52:d8:80] issuer orgUnit: PKI
[06-17 18:16:32 52:d8:80] issuer commonName: Sangoma Root Certificate Authority
[06-17 18:16:32 52:d8:80]
[06-17 18:16:32 52:d8:80] subject country: CA
[06-17 18:16:32 52:d8:80] subject state: Ontario
[06-17 18:16:32 52:d8:80] subject locality: Toronto
[06-17 18:16:32 52:d8:80] subject organization: Sangoma Corporation
[06-17 18:16:32 52:d8:80] subject orgUnit: PKI
[06-17 18:16:32 52:d8:80] subject commonName: Sangoma Root Certificate Authority
[06-17 18:16:32 52:d8:80]
[06-17 18:16:32 52:d8:80] notBeforeTimeType: 23
[06-17 18:16:32 52:d8:80] notAfterTimeType: 23
[06-17 18:16:32 52:d8:80] not Before: Jan 29 07:33:38 2016 GMT
[06-17 18:16:32 52:d8:80] not After: Jan 24 07:33:38 2036 GMT
[06-17 18:16:32 52:d8:80] =======================================================
[06-17 18:16:32 52:d8:80] TLS: commonName: Sangoma Root Certificate Authority
[06-17 18:16:32 52:d8:80] TLS: Load All(1) TrustedCert Success!!!

[06-17 18:16:32 52:d8:80] TLS: Load Server Certs Info …
[06-17 18:16:32 52:d8:80] TLS: Load Server Cert Info Success!!!

[06-17 18:16:32 52:d8:80] sips: Start sips ScanTask OK!!!
[06-17 18:16:32 52:d8:80] sips: Start sips ProTask OK!!!
[06-17 18:16:32 52:d8:80] sips: SIP TLS ProTask Start…
[06-17 18:16:32 52:d8:80] ActionUrlTask Start…
[06-17 18:16:32 52:d8:80] addr:8.8.8.8 is IPV4 address
[06-17 18:16:32 52:d8:80] DNSC: index 0 current dns_num 0 switch to DNS_1 addr:8.8.8.8 !
[06-17 18:16:32 52:d8:80] DNSC: resolv HostName – 0.us.pool.ntp.org
[06-17 18:16:32 52:d8:80] BLACKBLOCK: Initialization SUCCESS~!
[06-17 18:16:32 52:d8:80] WEBS: add user admin:222222 success
[06-17 18:16:32 52:d8:80] WEBS: add user user:111111 success
[06-17 18:16:32 52:d8:80] webs: SslOpen Success!!!
[06-17 18:16:32 52:d8:80] TLS: commonName: localhost
[06-17 18:16:32 52:d8:80] webs: SslLoadRsaKeys Success!!!
[06-17 18:16:32 52:d8:80] webs: Listening for HTTPS requests at port 443
[06-17 18:16:32 52:d8:80]

websSSLOpen()…

[06-17 18:16:32 52:d8:80] if_index[2]—
[06-17 18:16:32 52:d8:80] DNSC: Domain 0.us.pool.ntp.org, ip 23.31.21.164, TTL 149
[06-17 18:16:32 52:d8:80] NTP: TimeZoneChange, But SynNTPTime Fail!
[06-17 18:16:32 52:d8:80] NTP: DST Type Change, But SynNTPTime Fail!
[06-17 18:16:32 52:d8:80] NTP: NTP Server1 IP: 23.31.21.164
[06-17 18:16:32 52:d8:80] NTP: GetNtpTime from 23.31.21.164 OK, 1592418083 seconds
[06-17 18:16:32 52:d8:80]
Set time [1592418083] seconds to linux
[06-17 18:16:32 52:d8:80] Update the local time to flash for phone :2020-06-17 18:21:23
[06-17 18:16:32 52:d8:80] SaveCfg2Flash: cfg_if.c:11199
[06-17 18:16:32 52:d8:80] =======SET ADMIN USER INFO SUCCESS=========
[06-17 18:16:32 52:d8:80] =======SET USER INFO SUCCESS=========
[06-17 18:16:32 52:d8:80] UpdateTonesByTemplate:12894CountryCode28*
[06-17 18:16:32 52:d8:80] Please Config the identity
[06-17 18:16:32 52:d8:80] Running wpa_supplicant!
[06-17 18:16:32 52:d8:80] 8021X eap_mode :0 Not available
[06-17 18:16:32 52:d8:80] Write wpa_supplicant_wifi_p.conf len[165]
[06-17 18:16:32 52:d8:80] RTOS_Upgrade: Will Parse Config Server Path http://192.168.7.10:84
[06-17 18:16:32 52:d8:80] ParseSerPathStr:====== addr is 192.168.7.10
[06-17 18:16:32 52:d8:80] ParseSerPathStr: ip is 192.168.7.10, 0xc0a8070a
[06-17 18:16:32 52:d8:80] ParseSerPathStr:====== addr is 192.168.7.10
[06-17 18:16:32 52:d8:80] ParseSerPathStr: ip is 192.168.7.10, 0xc0a8070a
[06-17 18:16:32 52:d8:80] ParseSerPathStr: path is sangoma/1
[06-17 18:16:32 52:d8:80] IPv6 Addr Needn’t Refresh!!!
[06-17 18:16:32 52:d8:80] BT_Hciconfig_Set_Device_Up:: Can’t get device info…
[06-17 18:16:32 52:d8:80] BT_Hciconfig_Set_Device_Up:: Can’t get device info…
[06-17 18:16:32 52:d8:80] SaveCfg2Flash_DEBUG:2444=======aid 2, LocalSipPort Change!!=======haven’t UnReg=======
[06-17 18:16:32 52:d8:80] Close Udp Socket: SrcIpAddr=0x0 SrcPort=0 Pno=0 Event=0 NetId=0x0 …
[06-17 18:16:32 52:d8:80] Close Udp Socket: Invalid, HPS_UDP_Table[96].use = 0 !
[06-17 18:16:32 52:d8:80] SaveCfg2Flash_DEBUG:2444=======aid 3, LocalSipPort Change!!=======haven’t UnReg=======
[06-17 18:16:32 52:d8:80] Close Udp Socket: SrcIpAddr=0x0 SrcPort=0 Pno=0 Event=0 NetId=0x0 …
[06-17 18:16:32 52:d8:80] Close Udp Socket: Invalid, HPS_UDP_Table[96].use = 0 !
[06-17 18:16:32 52:d8:80] CFG1: aid 1, set to invalid
[06-17 18:16:32 52:d8:80] SaveCfg2Flash_DEBUG:2462=======aid 2, LocalSipPort Change!!=======haven’t UnReg=======
[06-17 18:16:32 52:d8:80] SaveCfg2Flash_DEBUG:2462=======aid 3, LocalSipPort Change!!=======haven’t UnReg=======
[06-17 18:16:32 52:d8:80] Chn 0 digitmap: x+#|xx+*
[06-17 18:16:32 52:d8:80] Chn 0 use default digitmap: {[x*]+}
[06-17 18:16:32 52:d8:80] Chn 1 digitmap: x+#|xx+*
[06-17 18:16:32 52:d8:80] Chn 1 use default digitmap: {[x*]+}
[06-17 18:16:32 52:d8:80] Chn 2 digitmap: x+#|xx+*
[06-17 18:16:32 52:d8:80] Chn 2 use default digitmap: {[x*]+}
[06-17 18:16:32 52:d8:80] Chn 3 digitmap: x+#|xx+*
[06-17 18:16:32 52:d8:80] Chn 3 use default digitmap: {[x*]+}
[06-17 18:16:32 52:d8:80] Image_1 Read Head: len = 512
[06-17 18:16:32 52:d8:80] WriteHlcfgFile:write hlcfg file sucessed !
[06-17 18:16:32 52:d8:80] SaveCfg2Flash:save Cfg file to Flash Sucessed!
[06-17 18:16:32 52:d8:80] wan port speed need not to change :current mode 0
[06-17 18:16:32 52:d8:80] pc port link setting need not to change :current mode 0
[06-17 18:16:32 52:d8:80] NTP: Adjust Time Thru Zone, DST is Manually Enable
[06-17 18:16:32 52:d8:80] NTP: AdjustTimeZone, 835017683 seconds
[06-17 18:16:32 52:d8:80] NTP: Old Count1s is 0
[06-17 18:16:32 52:d8:80] NTP: New Count1s is 835017683
[06-17 13:21:23 52:d8:80] <Set SoftClock from 2020-06-17 18:16:32 to 2020-06-17 13:21:23>
[06-17 13:21:23 52:d8:80] /hlfs/head_fw305.rom Read Head: len = 512
[06-17 13:21:23 52:d8:80] get_wan_port_link_duplex:562 #######port_link_duplex 1#######
[06-17 13:21:23 52:d8:80] /hlfs/head_fw305.rom Read Head: len = 512
[06-17 13:21:23 52:d8:80] get_wan_port_link_duplex:562 #######port_link_duplex 1#######
[06-17 13:21:23 52:d8:80] /hlfs/head_fw305.rom Read Head: len = 512
[06-17 13:21:23 52:d8:80] get_wan_port_link_duplex:562 #######port_link_duplex 1#######
[06-17 13:21:24 52:d8:80] mkdir /tmp/sysphoto/
[06-17 13:21:24 52:d8:80] RTOS_Upgrade: voip get image manage header sucessed
[06-17 13:21:24 52:d8:80] mtdInfo: /dev/mtd2 type=3, flags=3072, size=131072, erasesize=65536
[06-17 13:21:24 52:d8:80] /dev/mtd2 Read :located OK
[06-17 13:21:24 52:d8:80] /dev/mtd2 Read :len = 512
[06-17 13:21:24 52:d8:80] FLASH RECORD:FLAG=0x20170316
[06-17 13:21:24 52:d8:80] FLASH RECORD:Get old record
[06-17 13:21:24 52:d8:80] FLASH RECORD:flag=0x20170316 start_boot_count 0x2c,start_voip_count 0x2c update_location 0x0 record->fw_server 192.168.0.254
[06-17 13:21:24 52:d8:80] mtdInfo: /dev/mtd2 type=3, flags=3072, size=131072, erasesize=65536
[06-17 13:21:24 52:d8:80] /dev/mtd2 Read :located OK
[06-17 13:21:24 52:d8:80] /dev/mtd2 Read :len = 65536
[06-17 13:21:24 52:d8:80] /hlfs/head_fw305.rom Read Head: len = 512
[06-17 13:21:24 52:d8:80] get_wan_port_link_duplex:562 #######port_link_duplex 1#######
[06-17 13:21:25 52:d8:80] boot flag mtd flash Write:len = 65536
[06-17 13:21:25 52:d8:80] FLASH RECORD:Save record success
[06-17 13:21:25 52:d8:80] /hlfs/head_fw305.rom Read Head: len = 512
[06-17 13:21:25 52:d8:80] get_wan_port_link_duplex:562 #######port_link_duplex 1#######
[06-17 13:21:26 52:d8:80] Copyromfromflash: Copy rom file from MTD5 failed !!!
[06-17 13:21:26 52:d8:80] RTOS_Upgrade: Start, Wait Network Ready…
[06-17 13:21:26 52:d8:80] RTOS_Upgrade: running…
[06-17 13:21:26 52:d8:80] WanLinkStatus = WAN_PORT_LINK!!!
[06-17 13:21:26 52:d8:80] DHCPC: OptionValue – timezone

[06-17 13:21:26 52:d8:80] DHCPC: OptionValue – ntpsrv

[06-17 13:21:26 52:d8:80] DHCPC: OptionValue – tftp

[06-17 13:21:26 52:d8:80] DHCPC: OptionValue – hl_use_67

[06-17 13:21:26 52:d8:80] DHCPC: OptionValue – hl_use_100

[06-17 13:21:26 52:d8:80] DHCPC: OptionValue – hl_use_120

[06-17 13:21:26 52:d8:80] DHCPC: OptionValue – hl_use_128

[06-17 13:21:26 52:d8:80] DHCPC: OptionValue – hl_use_150

[06-17 13:21:26 52:d8:80] DHCPC: OptionValue – lease_seconds

[06-17 13:21:26 52:d8:80] DHCPC: OptionValue – vlan_id

[06-17 13:21:26 52:d8:80] DHCPC: OptionValue – hl_use_133

[06-17 13:21:26 52:d8:80] DHCPC: OptionValue – hl_use_43

[06-17 13:21:26 52:d8:80] DHCPC: OptionValue – hl_use_bt_wf

[06-17 13:21:26 52:d8:80] set_test_bt_wifi_str: buff is wrong
[06-17 13:21:26 52:d8:80] DHCPC:no get 802.1P set to 0
[06-17 13:21:26 52:d8:80] DHCPC: OptionValue – timezone

[06-17 13:21:26 52:d8:80] DHCPC: OptionValue – ntpsrv

[06-17 13:21:26 52:d8:80] DHCPC: OptionValue – tftp

[06-17 13:21:26 52:d8:80] DHCPC: OptionValue – hl_use_67

[06-17 13:21:26 52:d8:80] DHCPC: OptionValue – hl_use_100

[06-17 13:21:26 52:d8:80] DHCPC: OptionValue – hl_use_120

[06-17 13:21:26 52:d8:80] DHCPC: OptionValue – hl_use_128

[06-17 13:21:26 52:d8:80] DHCPC: OptionValue – hl_use_150

[06-17 13:21:26 52:d8:80] DHCPC: OptionValue – lease_seconds

[06-17 13:21:26 52:d8:80] DHCPC: OptionValue – vlan_id

[06-17 13:21:26 52:d8:80] DHCPC: OptionValue – hl_use_133

[06-17 13:21:26 52:d8:80] DHCPC: OptionValue – hl_use_43

[06-17 13:21:26 52:d8:80] DHCPC: OptionValue – hl_use_bt_wf

====

Any ideas why the phone would be acting like this once it receives the provisioning file from the server?

Thank you

Posts: 1

Participants: 1

Read full topic

↧

2 PBX - 1 Public IP - Same signaling port

June 17, 2020, 8:15 pm
$
0
0

@hunteralberto wrote:

Hi folks,

I’m playing with docker contenaiser and Feepbx, and it’s working nice for me.

I start 2 PBX in the same docker host and I respect each signaling and RTP port for both. It work fine.

The issue is that the Trunk provider send me the invite to 5060 port, it work well for one PBX, but the other one, that have the 5160 SIP port, don’t work

There’s a way that I can have a SIP proxy or SBC that handle the packet in the same 5060 port and them, for example, filter by a domain or other thing, redirect the traffic to the correct PBX?

This problem is only with Trunks, because I can manually configure sip port in the telephone.

Posts: 1

Participants: 1

Read full topic

↧
Viewing all 12620 articles
Browse latest View live
Search
<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>