@andrew_miller wrote:
Hello,
I have FreePBX 13.0.124 installed and working with a number of Yealink and soft phones.
I've purchased a new Cisco SPA112 and upgraded the firmware to 1.4.1(002) as the previous one did not work either.
According to the SPA112 it fails to register with freePBX but on the FreePBX dashboard it says the SPA112 is online but you can't call the SPA112 extension.
I used the Quick setup screen on the SPA112 and set Proxy, Display Name, User ID and Password. And I have changed the standard 5060 port to another for security reasons.
The SPA112 extension is configured for pjsip. I've tried channel_sip but the FreePBX never shows it online.
Has anyone got the SPA112 to successfully register with FreePBX ? Are there any other settings that need to be change for it to register properly ?
Regards,
Andy
Posts: 1
Participants: 1