Grandstream HT503 doesn't HangUP

@mogan wrote:

Hello, my configuration is:
Asterisk (Ver. 11.18.0)
FreePBX 12.0.76

I'm using Grandstream HT503 (HT-503 V2.0A Software Version: Program -- 1.0.14.1; Bootloader -- 1.0.0.18; Core -- 1.0.14.1; Base -- 1.0.14.1; Extra -- 1.0.14.1; CPE -- 1.0.1.48) to connect to a PSTN line and it's working, i can place call using an outbound route and incoming calls ring on ring group correctly.
The problem is that it doesn't hang up correctly, but only after (exactly) 60 seconds that I terminate the call on the pbx's phones.

Here are some config files i use, If you need more details just ask.

TRUNKS

Trunk name 503
Outbound CallerID 20002000
Maximum Channels: 	1
*Outgoing Settings*
Trunk Name: landline
PEER Details:
type=peer
authname=20002000
secret=mysecret
host=192.168.100.128
port=5062
disallow=all
allow=ulaw&alaw&gsm
canreinvite=no
dtmfmode=rfc2833
context=internal-phones
qualify=yes
hanguponpolarityswitch=yes
*Incoming Settings*
USER Context: empty
USER Details: empty
*Registration* 
Register String: empty

EXTENSION

Display Name = 20002000
Secret = mysecret
DTMF Signaling = RFC2833	
Can Reinvite = no
Context = from-internal
Host = dynamic
Trust RPID = yes
Media Encryption = none
Send RPID = send P-Asserted-Identity Header
Connection Type = friend 	
NAT Mode = no
Port = 5060
Qualify = yes
Qualify Frequency = 60 	
Transport  = All-UDP primary
Enable AVPF = no
Force AVP = no
Enable ICE Support = no
Enable Encryption = no

Here you can find grandstream config settings (add http cause I can't put images in topic).
://www.marcogiannini.it/temp/basic.png
://www.marcogiannini.it/temp/advanced.png
://www.marcogiannini.it/temp/fxs.png
://www.marcogiannini.it/temp/fxo.png

Thanks for helping.
Marco

Posts: 10

Participants: 3

Read full topic