@adamschendel wrote:
Hello Everyone.
So let me try to explain this non sense, please bare with me.
We have an Atlas Paging System, that is triggered via a Sip Trunk. The Atlas system is what controls our bells and hallway and loud speakers.
Then we use page pro thru FreePBX to page the phones and activate a sip trunk to activate the Atlas system.
There are 5 different trunks for five different areas that need to be paged. Now there is a district trunk which activates the whole system and it works fine, (other than the fact that when you dial it, it says the extension that is sending out the page. Do you know how to get rid of that)
But the other 4 trunks turn on, but dont activate the phones speakers and all you hear is the last 2 seconds of the page.
I know this sounds like a lot of jibberish, but not a good way to describe this system. Any thoughts on what to try to even diagnose why the district page works like it should, but nothing else does.Edit:
I recreated the "High School" paging group. When you dial it, it activates the Atlas paging speakers and 10 seconds later you hear the beep on the headset that indicates you that you can start talking. But it still does not activate the phones. Any thoughts?
Posts: 1
Participants: 1