How to configure 'In-Reply-To' Header?
@bodger wrote: Hello, I'm using FreePBX with Callcentric as my Trunk provider. I've set up an IVR to forward calls to staff member's cell phones out of hours, unfortunately the inbound CID is being...
View ArticleCareful with the latest update
@stephendt wrote: Hey guys, decided to run some updates of modules via the WebUI last night and definitely running into some major issues now. Web UI went down, rebooted and now it's painfully broken....
View ArticleYealink BLF transfer + external CallerID
@robdgem1 wrote: Hi Guys Quick question, is it possible with the BLF feature to show the external callerID when transferred to a extension. In other words when someone calls reception the receptionist...
View ArticlePage Pro Problems. Atlas Paging system & FreePBX
@adamschendel wrote: Hello Everyone.So let me try to explain this non sense, please bare with me. We have an Atlas Paging System, that is triggered via a Sip Trunk. The Atlas system is what controls...
View ArticleOne way sound issue with OPUS codec, but not with other codecs
@msclnl wrote: When using the OPUS codec in FreePBX 14. with asterisk 14, I have one way audio where one side or one party can hear the other, but not reverse. Using other codes like G722 gives...
View ArticleNew Voicemail Indicator remains on
@seanmcinnes wrote: Hi there,I have just moved onto the latest build of freepbx after having used a much older version for many years. I cannot understand why the voicemail light is always on (Cisco...
View ArticleMemory consumption grows to 100%
@Driver wrote: Hello,Two months ago I set up a new PBX system running as a Hyper-V guest. It has 4096 MB RAM allocated (dynamic memory is not enabled) and the traffic is usually quite low.There is...
View ArticleHardphones with Opus
@adventurer wrote: Now that I've got Opus running with FreePBX, I'm trying to find affordable physical phones that support Opus. What brands & models support the Opus codec? So far, I know...
View ArticlePhone becomes unreachable randomly
@skip189 wrote: Hi everyone, I have a new FreePBX instance hosted in AWS. The phone will randomly become unreachable. If there is a pattern it seems to become unreachable right before the phone should...
View ArticleLines always busy - How to disable RTP encryption
@Q_Q wrote: I use Jitsi with an external SIP trunk (monthly subscription) and everything is fine, both inbound and outbound calls.Now I want to set up another client and have the routing done with...
View ArticleClik here to view.
How to increase SIP Volume Gain Levels
@AlexShimmin wrote: Does anyone know how to increase the Gains on Asterisk for all SIP calls?I'm aware you need to create a context with the TX and RX in it but I've tried a few things but no success...
View ArticlePRI failing after yum update
@sscharioNGT wrote: Hello All. FreePBX 13.0.190.7 with Sangoma A101DE PRI card. Ran yum update last night (I did not note them.) All external calls fail now. Outbound callers hear "Your call cannot be...
View ArticleClik here to view.
How to modify ring cadences for SIP ALERT_INFO
@AlexShimmin wrote: So basically Iv'e worked out how to change the alert info option on freepbx for incoming external calls. I'm using Cisco IP Phones and when I set the alert type to it indeed was a...
View ArticleClik here to view.
Erratic context changes on calls from the same SIP Trunk IP
@Jacques0130 wrote: Hi All, Long-time googler, first-time poster. I'm trying to set up a new cloud PBX system as our on-premise box is beginning to show it's age. I've also been having some odd issues...
View ArticleClik here to view.
FreePBX over Asterisk
@akadimka wrote: Hi! Here's the question - is there a way to transfer all settings from old asterisk system to newly installed FreePBX? I mean how to transfer sip.conf, extensions.conf etc.?I tried to...
View ArticleSetup emergency number service
@faisalkhan wrote: hi all, I want to setup an emergency number like in case of fire incident or any other incident in my company, when someone dial say *911 or any specified number and it rings...
View ArticleLimit concurrent access to voicemail box
@JeffroJones57 wrote: Hi there! I have a client where two users are monitoring a mailbox throughout the day. There have been times where both users have accessed the mailbox at the same time, and...
View ArticleDatabase retention history
@kelliott wrote: I did a little searching but couldn't find the answer to this, but what is the default length that freepbx 13 stores items in the database? I have queuemetrics pulling from this...
View ArticleIs my firewall working as it should - FreePBX 13.0.190.7
@ashleydrees wrote: I have recently install FreePBX 13.0.190.7, trying to get a handle on the firewall, i have it set up, but it does not seem to be doing what i think it should be doing. i have a...
View ArticleFirewall Configuration gives issue warning in system status
@fishnet wrote: When using the GUI I am seeing a red 'X' instead of a checkmark for 'Firewall Configuration'. When I hover over the text it says "Trusted Interface Detected'. I have looked in the...
View Article