Yealink T4XG phones will not autoprovision over HTTPS with FreePBX 14

@sorvani wrote:

Not using Endpoint Manager

Using a T46G: I have the following files y000000000028.cfg and 001565649346.cfgin /tftpboot
Using a T42G: I have the following files y000000000029.cfg and 00156565fb3c.cfg in /tftpboot

New install FreePBX 14 is setup with a valid LE cert
New install FreePBX 13 is setup with a valid LE cert
Upgraded FreePBX 13 to FreePBX 14 install is setup with a valid LE cert

Phones are on a network listed as trusted.

SysAdmin Port Management is configured as pictured in all three systems:

image.png869x413 38 KB

On the FreePBX 13 system I can enter https://pbx.domain.com:1443 into the Yealink phones and they will auto provision nearly instantaneously.

On both of the FreePBX 14 systems when I enter https://pbx.domain.com:1443 it does nothing.
On both of the FreePBX 14 systems when I enter http://pbx.domain.com:84 they respond much slower than the FreePBX 13 system, but the phones do eventually autoprovision.

Posts: 5

Participants: 3

Read full topic