Issues with queue
@julien wrote: Hello, in my company i have one queue with 4 agents (A) with a waiting of 13 minutes for the caller.And i have another agent (B) who are not in the queue. Actually i want that if after...
View ArticleSetting up SMS with Flowroute
@bigmillz wrote: We've recently enabled some SMS targeted ads, and already people are using it. The thing is, I'm running them through Google Voice right now, and I'd prefer to have it go through...
View ArticleDisplay on custom trunks
@Talal wrote: Hi everyone, Im having an issue here and your help is much appreciated. I created a custom trunk to forward all long distance calls to an internal extension which works fine but the...
View ArticlePjsip with Flowroute
@bigmillz wrote: Everytime I flip the driver in Advanced Settings from both to just pjsip, and then run fwconsole restart I can no longer do incoming/outgoing calls. Incoming gets a few rings,...
View ArticleClik here to view.
Yealink T4XG phones will not autoprovision over HTTPS with FreePBX 14
@sorvani wrote: Not using Endpoint Manager Using a T46G: I have the following files y000000000028.cfg and 001565649346.cfgin /tftpbootUsing a T42G: I have the following files y000000000029.cfg and...
View ArticlePut the company name from table 'userman_users' to a cookie after successful...
@carpenter wrote: Hi there, I would like to make some customizations in Freepbx, to achieve the goal listed in the subject of this topic.I'm running my own voip service mainly with usin Freepbx 11...
View ArticleT1 voice line (AT&T) how to set PRI
@jeffaeon wrote: Greetings, (also x-posted in digium section) I have a Digium TE121 card and a T1 8 channel service from AT&T. I cannot get the settings right in FreePBX. AT&T gave me settings...
View ArticleConnecting to a Toshiba CIX
@penbrock wrote: We have a Toshiba CIX670. I want to try to use the voice mail and conf. bridge features of the FreePBX. Has anyone gotten a Toshiba SiP station to connect to FreePBX trunk ports? Or...
View ArticleFreePbx issue usa number
@julien wrote: Hello, i have a problem with a number on my freePbx..... It is a usa number but i'm not in USA... I want that if someone call this number in his country (usa), the call will be...
View ArticleClik here to view.
Outbound calling doesn't work
@JohnCO wrote: Hey guys, I'm having a weird problem with one of our PBXs. It's running FreePBX 14.0.1.4, and VoicePules is my SIP provider. Inbound calling and internal calls work fine, but any calls...
View ArticleTwilio Inbound troute callers get “the number you have dialed is not in service”
@Zirwo01 wrote: I am kind of new to the PBX and the free PBX world. I successfully installed and configure my freepbx server. it is up and running I can call ext to ext and was able to successfully...
View ArticleCID Superfecta Not Working on Inbound Calls
@vbman213 wrote: I have CID Superfecta configured to use OpenCNAM. If I run a Debug/Test Run Scheme, Superfecta returns the correct information (ultimately pulling from OpenCNAM) My inbound route is...
View ArticleUnderstanding RTP Sound Issues
@tempes3k wrote: Hi Guys, I am using Freepbx, most oft the time it is working nice and smooth.Sometimes i receive a call and after a few seconds we have only 1-way Audio. i can't hear the external...
View ArticleYum probelm
@glew wrote: Error: Package: 2:vim-enhanced-7.4.160-2.el7.x86_64 (sng-base) Requires: vim-common = 2:7.4.160-2.el7 Installed: 2:vim-common-7.4.258-1.shmz65.1.4.x86_64...
View ArticleFreepbx12, fax pro licensed, no fax in ucp
@bbb wrote: hi there, i am about to setup outbound fax. hence i just installed/purchased fax pro module. unfortunately i cannot see any fax buttons in ucp. i installed ucp after faxpro, as i did not...
View ArticleSoftphones, External Clients, VPN, Etc
@nmarques wrote: I have a few questions with best configuration options.... If we want our users (less than 10) to be able to log into softphone software at home or on mobile phones, can this be done...
View ArticleDetecting Original distination number on incoming forwarded call
@someguyin831 wrote: I have been searching for weeks on a way to route an incoming call based on the following conditions:1. The incoming call was forwarded.2. read the originally dialed phone...
View ArticleClik here to view.
Can't upgrade to FreePBX 14 due to iSymphony remnant
@gwntc wrote: ┏━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┓┃ ┃┃ Sangoma 6 to 7 Upgrade Tool ┃┃ ┃┃ Distro Upgrade - Version 1707-17.sng7 ┃┃ Build Date: 2017-08-23 ┃┃...
View ArticleIssues after upgrade to FreePBX14 - LoadLicenseIfExists - Incompatible File...
@gwntc wrote: PHP Warning: PHP Startup: digium_register: Unable to initialize moduleModule compiled with module API=20090626PHP compiled with module API=20131226These options need to match in Unknown...
View ArticleWhich is more efficient, ChanSIP or PJSIP?
@AIC2000 wrote: HiI always used the traditional chan sip with FreePBX until the last 8 months ive started doing setup with pjSip. Both are setup correctly, however I have had the perception that pjSip...
View Article