Cisco 7961 on patched Asterisk 11: cannot make BLF working

@tsunami wrote:

Continuing the discussion from Cisco 7914 works with SIP - Now Trying to Add it to Endpoint Manager:

Hi all!
After a dozen nights passed to read forum posts, make tests, trying to figure out and crying, I decided to ask for a community help here...
I bought a lot of cisco phones (yes I know, it's not a good choice, but it's too late) for my future home (still in building).
I'll need a phone system for different purposes: internal communications, door phone system, remote office working.

I've patched the Asterisk 11.20.0 of a clean FreePBX 10.13.66 installation with the cisco-usecallmanager patch found here.

After that, I read this useful closed topic, confirmed what I knew and learned something new (7914 now works like a charm, and I have to say "thanks to all"!).

A specific information about BLF is in this post:

I have:
1x Cisco 7961 + 7915 (connected for test)
1x Cisco 7960 (connected for test)
12x Cisco 7912 (only one connected for test)

The 7961 is configured with the "USECALLMANAGER" way, so it connect in TCP mode.
The "Line button" parameters for the speed dial has "1"

On the "Astersik SIP Settings" -> "Chan SIP Settings" -> "Other SIP Settings" of FreePBX I entered:
- tcpenable = yes
- transport = tcp
Asterisk is listening on tcp:5060 as netstat reports.

I can't see any BLF working.

I suppose it is an Asterisk configuration issue... I'm not so skilled about Asterisk advanced configurations.
I pasted the "spyda" code into my extensiosn_custom.conf, but I can't understand the meaning for

Can somebody help me in make BLF working?
A good starting point could be help me understanding the "pickup groups tagging" for BLF purposes.

Thank you in advance!

Posts: 1

Participants: 1

Read full topic