IAX SIP URI Dialing
@geofferey wrote: I recently set up a small FreePBX box using a Raspberry Pi & IncrediblePBX. To my surprise I found that it couldn't make outbound calls to third party sip providers out of box. I...
View ArticleSangoma FreePBX Console
@aryncavage322 wrote: So I purchased a rack mountable Sangoma FreePBX appliance and it came with a USB to Serial (RJ45) cable for console (I assume.) What software do I need to view the console using...
View ArticleWhat could cause SIP_REG to timeout on a working connection?
@thender wrote: NOTICE[2343]: chan_sip.c:15180 sip_reg_timeout: -- Registration for 'xxx@xxx.dca.proxy.voicepulse.com' timed out, trying again (Attempt #319) I tried pinging the IP associated with the...
View ArticleExternal DID call forward to external Line
@ncaridi wrote: Hi, I'm using a digium G200 gatway with E1 line. When calling from an external line directly to the DID associated with an inbound route directly to an external number the call hangs...
View ArticleQueue Callback
@assos40 wrote: Hi,Is there a way to callback at a later time a caller that hangup the call while waiting in the Queue ?Thank you Posts: 1 Participants: 1 Read full topic
View ArticleAsterisk Phonebook Import limit around 1051 lines?
@wpns wrote: I'm trying to import my contacts list, which I've created from my OSX Address Book using a Python program. The format looks right, and there are no obvious anomolies, but if my input...
View ArticleConference Issues
@jmalette wrote: I have several conference related issues that have popped up over the past several months. Some Conference numbers will intermittently come up with wrong password messages for two to...
View ArticleClik here to view.
VPN config issue
@johnprogers wrote: The Wiki for setting up Open VPN here http://wiki.freepbx.org/display/FPG/System+Admin+-+VPN+Server#SystemAdmin-VPNServer-DownloadingClientConfigs Is incomplete. The last step is...
View ArticleTwo update scripts running at the same time on System Admin module?
@darkconz wrote: My phones weren't working this morning so I checked the system. I noticed the system did an update: 2016-02-09 02:55:06: () Update sequence initialized2016-02-09 02:55:06:...
View ArticleClik here to view.
Cisco 7961 on patched Asterisk 11: cannot make BLF working
@tsunami wrote: Continuing the discussion from Cisco 7914 works with SIP - Now Trying to Add it to Endpoint Manager: Hi all!After a dozen nights passed to read forum posts, make tests, trying to...
View ArticleClik here to view.
VoiceMail BLF not working properly
@ncaridi wrote: Hello Experts I've setup a virtual ext. with voicemail. I've registered a blf key for that Voicemail (*98390): *98390@app-dialvm : MWI:390@ State:Idle Presence:not_set Watchers 6on...
View ArticleVoicemail transfer goes to agent login
@carlosmp wrote: Hi - we seem to be having an issue when attempting to transfer to an extensions voicemail. The destination extension is 117. The person on teh phone will hit transfer, *117#, and the...
View ArticleModule file tampered
@charlandf wrote: Hi! I'm getting a lot of tampered modules without even touching anything. I'm on FreePBX 13, from a clean distro install. Everytime I open my FreePBX Admin, I have like 10-40...
View ArticleTwilio Inbound Suddenly stops working
@1parkplace wrote: Had everything set up and working and suddenly over night, inbound calls are not working. In the Asterisk CLI, if I show channels, I see tons of channels created when I call in,...
View ArticleCamp-on not working com call waiting (disabled)
@jsilva wrote: Good evening, I'm using FreePBX 12 and the camp-on function only works with call waiting enabled. But I have to use with call waiting disabled. Does anyone know how to get around this?...
View ArticleClik here to view.
FreePBX stripping entire telephone number
@mydxbtester wrote: I've created a route rule under "Outbound Routes", set the route CID number (from carrier) and had it "Overirde Extension CID" just like my other Outbound Route Rules. I configured...
View ArticleFreepbx 13 Firewall & TFTP
@jpennell wrote: Linux noob here so please go easy... For the last week or so I have been playing with an installation of Freepbx 10.13.66 with Asterisk 13. I have been trying to get the TFTP server...
View ArticlePower (reboot, poweroff) functions in UI not working?
@wpns wrote: I've just upgraded to the latest set of modules as of Feb 10, 2016 6AM EST, and now I find that the Admin>>System Admin>>Power Options>>{Power Off,Reboot} options don't...
View ArticleT1 not working after 10.13.66-8 update
@tebolden wrote: My T1 stopped functioning after I installed the 10.13.66-8 update this morning. I am seeing the following log messages: [2016-02-10 12:28:05] WARNING[6086] chan_dahdi.c: Unable to...
View ArticleFreePBX 13 VPS DAHDI Error
@DimaT wrote: Build new install on VPS server from sources (CentOS 7, FreePBX 13). On top right corner - "Apply Config"- every time I press it says "Reload failed because retrieve_conf encountered an...
View Article