@totallytech wrote:
Hey Guys,
I've got a new install, - I've set up the incoming phone number with a supplier and its configured as a Trunk (I only want incoming calls to use this trunk).
I then have a different supplier who I'm using for outgoing calls. Thats been set up as a trunk too. Both are registered in the dashboard as are my handsets, however when I ring my number nothing happens at all. I've looked in the logs and it says:
[2016-02-25 13:33:46] NOTICE[5098]
res_pjsip/pjsip_distributor.c: Request from
'' failed for
'212.11.94.169:5060' (callid:
4515e0000ef5-56cf02ba-a89bd35-22461028-a3b4336@127.0.0.1) - No matching
endpoint foundNow this must be my test call coming in as its showing 07111111119 in the log (I'm not sure what those IP addresses are as I don't recognise them) but obviously no matching endpoint...
I have an incoming route set up in my configuration which says if a call comes in using the IN trunk then send to extension 100. So I'm not sure why its saying no endpoint found...
Any ideas?
Posts: 2
Participants: 1