G.722 for internal calls?
@user9000 wrote: I'm not 100% sure if this is more trouble than its worth but I'd like the quality bump for g722 on our internal calls. I can certainly enable g722 in the SIP settings, make it first...
View ArticleModule Admin Upgrade FreePBX Framework?
@christopher_thornton wrote: Hello, I am running: FreePBX 2.11.0.43Asterisk 11.7.0 I have been using the Module Admin to upgrade. It appears that FreePBX framework will not update beyond my current...
View ArticleGuidance on Sangoma A200 - FreePBX setup - outbound failing
@GeekBoy wrote: Learning about setting up as I have never done this before. Getting the following: WARNING[5168][C-00000004]: app_dial.c:2411 dial_exec_full: Unable to create channel of type 'DAHDI'...
View ArticleCore.pbx files in /tmp are filling my HDD - FreePBX 13.0.70
@mais_um wrote: Hi I'm new on VoIP and installed freePBX on a Hyper-V machine. Almost all good but i have a BIG problem the files core.pbx-* are filling my HDD (/tmp fonlder). I reserve 25GB of space,...
View ArticleCisco 7940 will not connect to freepbx
@totallytech wrote: Hey Guys, I've got a newly installed FreePBX / Asterisk server. I have 3 Cisco 7940 handsets which have had the sip firmware installed on them and are currently connected to an...
View ArticleNo matching endpoint?
@totallytech wrote: Hey Guys, I've got a new install, - I've set up the incoming phone number with a supplier and its configured as a Trunk (I only want incoming calls to use this trunk). I then have...
View ArticleClik here to view.
FreePBX Firewall - no matching endpoint found
@AdamKayden wrote: FreePBX firewall is enabled but i kept getting these type of error. How can i make sure Responsive is working and show the status of this IP being blocked? [2016-02-25 21:33:38]...
View ArticleINVITE has wrong Sent-by Address - preventing returning RTP
@dvanaken wrote: Fpbx 13/Asterisk 11 with no return inbound audio. This is a ported config from my current FPBX 12 with Asterisk 1.8 (I upgraded 12-to-13). The current NAT config has been correctly...
View ArticleCall destination by CID inside IVR
@digiteltlc wrote: Let's say IVR message says "press two for technical assistance"Once "2" is pressed how a call can be forwarded to extension "a" or extension "b" based on its CID ?? Thank you Posts:...
View ArticlePossible to make UCP password same as VM password?
@user9000 wrote: Not sure if this is possible, but it would be nice to be able to log into the UCP with one's VM password. Posts: 7 Participants: 4 Read full topic
View ArticleTrunks not registering after upgrade from v12 to v13
@bodger wrote: Hello, I'm hoping somebody can help me out here. I just upgraded my version of FreePBX from v12 to v13. Everything seemed to run OK, but now none of my trunks will register. The FreePBX...
View ArticleLog of when admins login?
@Beachtech wrote: I am the admin on this FreePBX 2.11 system, but I have two employees, each with their own less-than-admin account, that I delegate certain rolls to. Does FreePBX have a log of when...
View ArticleStation to Station calls failing (nonce problem)
@bbach wrote: FreePbx Distro FreePBX 13.0.70Asterisk 13.7.0 Hi, Hopefully, this is something simple. I have two Cisco 7940's connected using PJSIP. I (as others have) battled to get these phones...
View ArticleFollow-Me error: syntax error unexpected '>=', expecting $end; Input: >= 1 ^
@avayax wrote: Follow me on one of my extensions is not working. The Local/FMPR-1234@from-internal channel doesn't get invoked. It doesn't ring any of the numbers in my follow me list. Getting an...
View ArticleOutgoing calls are silent
@mauritz wrote: We have a new Centos7 / FreePBX13 installation with Yealink W52P handsets. We're able to receive calls perfectly but when trying to make an external / outgoing call the handset is...
View ArticleCalling functions.inc.php failing on adding devices
@briansouth wrote: Hi All, so i have been making an API to add a user using your functions.inc.php, i call the functions and it adds an extension but fails to add a device. here is my out put: FATAL...
View ArticleIVR DTMF Not Working
@MS1 wrote: Hi,The IVR is not deducting the DTMF key press. Any suggestion to resolve the issues ? tried doing inbad & RF also Auto but nothing worked! Regards,Mohammad Posts: 3 Participants: 3...
View ArticleSIP Unregistered
@MS1 wrote: Hi,While changing the FREE PBX configuration via GUI and applying it 4-5 times makes the SIP trunks go unregistered. My Current Asterisk Version: 11.21.2 FreePBX 13.0.70PBX...
View ArticleChange extensions_additional.conf
@alx_ wrote: I have a FreePBX 2.11 system and I want to edit a specific context from extensions_additional.conf. The context is [from-internal-noxfer-additional]include =>...
View ArticleAdd conference room to ring group?
@dineshvg wrote: I know we can add extensions to ring groups, but wanted to know if it is possible to add a conference room to this ? Posts: 3 Participants: 3 Read full topic
View Article