Clik here to view.
User Panel is not loading
@faisalkhan wrote: hi all, I have updated freepbx to 13 and could not able to load user panel from user panel tab instead i am getting error. I am attaching the error here. please if any one has the...
View ArticleSupport for deaf/hard of hearing customers
@bksales wrote: i was asked today what support their is in freepbx/asterisk for deaf/hard of hearing callers and quite honestly i was stumped. i would appreciate any thoughts on this subject. Posts: 1...
View ArticleHow can I add a secondary ip to freepbx 12?
@GRZMRC wrote: Hi, In sysadmin->network I can add a virtual interface (eth0. 0) but the ip is not reachable. I need that freepbx respond to two different subnet in the same LAN. Many thanks Posts:...
View ArticleSangoma S500 SIP Registration via VPN
@mabbaticchio wrote: Running FreePBX 10.13.66-17 all modules are up to date. I have setup the VPN and have setup EPM to use the vpn client. The client phone gets a VPN IP address and establishes a...
View ArticleWeak Secret
@beneboi wrote: Hi all for 10 months now i can't get rid of the message 1 extension/trunk has weak secret. Theissue i have is the ti have deleted everything to do with this extension yet i can't get...
View ArticleFwconsole reload returns error: General error: 130 Incorrect file format 'music'
@avayax wrote: [root@freepbx-b ~]# fwconsole reloadReloading FreePBXError(s) have occured, the following is the retrieve_conf output:exit: 1PDOException: SQLSTATE[HY000]: General error: 130 Incorrect...
View ArticleFreePBX 13.0.190.7 - Cisco 7960
@raymonvdm wrote: This weekend is started to migrate my old FreePBX to a new FreePBX but without success yet. I just installed on a new machine, and i`m taking over the settings one by one. The old...
View ArticleWhy does freepbx connect to some IPs?
@notwerking5 wrote: I'm running asterisk / freepbx 13 with chan_dongle on a debian 8.1 machine. I've noticed a few blocked IPs in the firewall logs: 217.11.63.42:1137131.19.202.252:...
View ArticleClik here to view.
Missing several menu items and have "Can not connect to asterisk" message
@Bradbpw wrote: I have a warm spare set up in my office. On the warm spare I am receiving a message in the upper right that says "can not connect to asterisk" and I am missing some menu items in my...
View ArticleBackground music (again)
@threeeye wrote: I know this topic was discussed a lot (also by me)...But my client really needs it.So, here is what I have so far...You need to call a custom group that will put the phone on...
View ArticleWhy does everyone say change default SIP 5060 port when VoIP Providers don't...
@ittechgroup wrote: Hello, I have multiple FreePBX 13 cloud servers setup. I have them secured with the responsive built-in firewall. As expected I see tons of scans and attacks from random IPs. I...
View ArticleHA Module over VPN?
@mvogel4949 wrote: While I realize it is better to have the two Nimbus platforms physically connected is it possible to set this up using a VPN between two sites? Posts: 1 Participants: 1 Read full...
View ArticleClik here to view.
Can't get PJSIP working FreePBX V13.0.190.7 & Asterisk V13.11.2
@Bumbaa wrote: Hello, I am currently using FreePBX V13.0.190.7 and Asterisk V13.11.2. I am trying to utilize PJSIP with FreePBX but it seems I can not it get it to work. My phone does not register to...
View ArticleCalls cutting in and out
@sentinelace wrote: We have had complaints where users cannot even understand people because the lines cut in and out. I checked the bandwidth and it is 10/2 which should be fine for 5 phones. Any...
View ArticleWill FreePBX Support Asrock E3C226D2I
@ianarman wrote: Hello, I'm wondering if FreePBX will support an Asrock E3C226D2I / Intel Xeon Posts: 1 Participants: 1 Read full topic
View ArticleFreePBX 13.0.190.7 - Cisco 7961
@raymonvdm wrote: I am in the process of switch to the latest stable release of FreePBX but i can`t get my Cisco 7961 phone to register. The config looks fine to me but the registration is not...
View ArticleNo audio on remote extension
@lblokland wrote: Hi, after replacing (an old) Freebpx installation with 13, the remote extensions are able to register, intitiate calls, but there is no audio.During the call setup I can see a 401...
View ArticleClik here to view.
FATAL ERROR DB Error: connect failed
@florianahm wrote: FATAL ERROR DB Error: connect failed Trace Back /var/www/html/admin/libraries/db_connect.php:71 die_freepbx() 0: DB Error: connect failed /var/www/html/admin/bootstrap.php:91...
View ArticleMOH and System Recordings error
@Kamossdoesasterisk wrote: I am running into an issue whenever I attempt to convert audio files either within MOH or system recordings: I see the following when I attempt to upload an mp3 file...
View ArticleHelp sorting out what is happening with the firewall
@ashleydrees wrote: New installation - freepbx latest with Asterisk 13 behind a nat firewall with the relevant ports forwarded to the FreePBX install with its "progressive and active firewall" i see...
View Article