Dedicated fax line
@StephanK wrote: Hi, besides my Sipstaion and Twillio trunks I have a dedicated fax line from an old fashion phone company connected through a hardware card. I also have an extension for our fax...
View ArticleOutbound calls ring for caller but doesn't actually go through
@gwntc wrote: I've got an issues with a FreePBX 50 system with built in FXO card. The client is telling me that when they call out a lot of the time the phone just ring and rings and rings but nobody...
View ArticleError after freepbx restore
@florianahm wrote: After i screw it trying things in freepbx, i did a fresh install and then i restore from a fullbackup did a week later. i installed FreePBX-6.12.65-30 and did 2 upgrades that was...
View ArticleNo Call Transfer with Cisco SPA112
@Eres wrote: Hi, I recently installed a Cisco SPA112 and registered a extension with no problems. The only problem is with Call Transfers. It is not possible to put the call on hold with, in this...
View Article[SOLVED] What does 'failure to pass ACL' mean?
@byrnejb wrote: FreePBX distro 10.13.66-17FreePBX 13.0.190.7Asterisk 11.24.1Jitsi 2.8.5426 When attempting to connect a softphone I am seeing these errors in the Asterisk logs: SIP Peer ACL: Rejecting...
View ArticleFreePBX firewall overwrites existing iptables rules
@andy_woolford wrote: I have set up some rules in iptables for port forwarding and masquerading. These have been saved in the iptables startup file using: service iptables save The freepbx firewall...
View ArticleUnable to Install blacklist module
@asteroid4u wrote: Hi, We are using freepbx and I want to blacklist outbound and In bound calls. I am trying to install blacklist module but it is failing with below error Please wait while module...
View ArticleClik here to view.
How we can create ivr menu system in our voice in freepbx? help needed!
@shoobi wrote: can u create ivr menu system in freepbx? help needed ! Screenshot_5.png1313x256 13.5 KB Posts: 5 Participants: 3 Read full topic
View ArticleCisco 7941 - Phone Directory
@cappilio wrote: Hi Guys, Sorry if this has already been discussed in details but i cant seem to search the forum topics.I did some previous google searches and find a few topics that help describe...
View ArticleMy FreePBX system has been hacked
@markcrobinson wrote: So my trunk provider, Vitelity, detects unusual Intl call volume and shuts off International. Phew. Their call logs show about $50 worth of international calls from my IP...
View ArticleDoes Sys Admin Updates also update your Modules?
@mvogel4949 wrote: If I run a complete update all the way to the newest version of FreePBX13, which I believe is -17, will that also update all of my modules to the newest release version? And if I...
View ArticleMultiple registrations from same ip device
@astbox wrote: So I have an old Epygi gateway, with one pri and one fxs port. The fxs port registers to my FreePBX box.For the pri port I have a sip trunk. I get a digest authentication error, the...
View ArticleThe Uniden EXP1240 wireless DECT phones losing registration with FreePBX
@FryDaddy6 wrote: We are running FreePBX 13.0.190.7 on Asterisk 13.12.2. We have just installed 6 EXP1240H and 4 EXP1240B from Uniden. The are running awesome with great coverage and voice clarity in...
View ArticleRemote Sangoma Phone - Provisioning VPN tar file
@vianneyjs wrote: Hi guys, I registered the mac address of my remote Sangoma S500 @Sangoma Portal, at this point the phone pulls its config from its deployment, but it does not pull its VPN tar file....
View ArticleFreePBX not recording supervised transfer
@DarkQuark wrote: Greetings all. This might be a misconfig on my end, if it is please point it out. I have 3 extensions set to record (via force option on the extensions) inbound internal and inbound...
View ArticleAppend CID/CNAME on forwarded call
@nubleet wrote: I have a trunk that is setup specifically to forward outside calls to a certain internal extension back out a SIP trunk to another external number. Is there a way to append CID...
View ArticleLetsEncrypt failing to renew
@sorvani wrote: My certificate failed to renew the last couple days, so I checked the modules and updated certificate manage form 13.0.34 to 13.0.34.4. No change. There was an error updating the...
View ArticleUnique Queue Users
@nettel wrote: Hello, have a few workstations for our customer service department where the users change shift throughout the day. The department leader would like to begin getting stats/reports on...
View ArticleSRV records for TLS
@dcitelecom wrote: I use SRV sub domain record to point UDP and TCP traffic to port 5060. e.g. sub1.domain.com = UDP port 5060sub2.domain.com = TCP port 5060 Do I need to create another record for TLS...
View ArticleCustome Queue Ring -> Message -> MOH
@dears1208 wrote: I am working with a client that would like calls to ring, if unanswered they would need to hear a message, then go to MOH while holding for an agent. Caller side. "4 Rings ->...
View Article