Zero Touch Provisioning missing by deployment now
@gwntc wrote: The Zero Touch Provisioning for Sangoma phones now only shows IP/FQDN as the redirection type. It previously would allow to redirect by Deployment ID I have a bunch of old phones that...
View ArticleBeep During Page
@adamschendel wrote: Hey guys. I know the title is a little vague, but I am not sure how to describe what is going on. So here it goes.During our page about 5 seconds in we have a loud beep come...
View ArticlePass inPhonex PIN in dial string for ADI passthrough?
@kevinkretz wrote: Hi, I've been using FreePBX with Inphonex for a while at home with good results. I'd like to have outbound calls show a particular CID. Inphonex supports ANI passthrough and require...
View ArticlePhone Apps Languages
@chrischevy wrote: In what languages is Phone Apps available ? I tried to find the information in the forum or the manual but I can't find it.They are some posts in the forum about translations but...
View ArticleDahdi not working
@Pandera wrote: Hi guys i did a yum update and now when i do amportal restart i get these errors STARTING DAHDI FOR DIGIUM CARDS Loading DAHDI hardware modules: FATAL: Could not load...
View ArticleManager.c: 127.0.0.1 failed to authenticate as 'admin'?
@mvogel4949 wrote: I'm seeing this message every 3s in my logfiles. Any idea how to get rid of it? manager.c: 127.0.0.1 failed to authenticate as 'admin' FreePBX 13-18Asterisk 13.14.0 Posts: 1...
View ArticleWhat are IPitomy phones and can they be used with FreePBX?
@bksales wrote: Have a potential customer with two offices, each with one of these in house PBXs and some of what seems to be a proprietary phone. They don't mind the phones but they're unhappy with...
View ArticleA few Phone Apps questions
@chrischevy wrote: I just bought Phone Apps Module for our 6869i phones (Phone Firmware 4.2.0.2023 and FreePBX version 6.12.65-30 I have a few questions/issues: Is it possible to have the phone ask...
View ArticleHELP PBX not working fwconsole and amportal commands do not work
@DougPBX wrote: I was updating a module and it seemed frozen so I did a hard restart of the server and now nothing works. I get a string of errors like: PHP Fatal error: Uncaught exception...
View ArticleIncoming calls being diverted to a number we called, then DAHDI staying offhook
@jimf wrote: Hi all. I'm facing what I believe is the most bizarre problem I've ever come across since installing FreePBX. FreePBX 13.0.190.19 / Asterisk 13.7.2 / DAHDI 2.11.0 Basically, we made a...
View ArticleClik here to view.
Problem installing Australian Sound Lanuage
@shanecaznet wrote: Any attempt to install the Australian languages shows the error attached below. When the license agreement screen is shown, it also never finishes "Loading..." I have ran through...
View ArticleHow to verify if IAX2 Encryption is working
@avayax wrote: I have an IAX2 trunk between two FreePBX boxes and I want to verify if encryption is working properly. I got this in peer details:forceencryption=yesencryption=yesauth=md5 Now,...
View ArticleCall of service module does not give "cannot complete as dialed" prompt
@woodpecker505 wrote: I have 2 FreePBX V13 systems- the first with only Extension routing enabled, the second with extra Class Of Service module. When an extension calls a non authorized number, then...
View ArticleNeed Some advice: Hotel Style Voice Mail Setup
@striker495 wrote: I have a environment that I have regular staff Voice mail set up and the need for Voice Mail boxes setup for a on site resident rooms attached to virtual extensions. total of 400...
View ArticleNo incoming Audio from PRI lines when using hardware voip phones
@amitabh wrote: I have a slightly strange problem with my FreePBX installation. Calls between any extensions work with audio on both the originating and destination extensions. Calls coming in from...
View ArticleSIP phone not rigging from external call
@Bento wrote: Hi everyone, first of all let me say i am a total beginner and do not plan to become a pro at all.I'm used to install new phone on our PBX server which is an Elastix with FreePBX.Usually...
View ArticleQueue Setup Help
@FN_GM wrote: Hello, I have a queue. I have 2 static agents in the queue and it is setup the ringall. I would like it so if there is only 1 person at the desk (the other person is away or something)...
View ArticleSingle CID matches two Inbound Routes. How to?
@vgbltsk wrote: Dear FreePBX Guru,I stumbled across the problem and was unable to find the answer on the forum. Possibly, it was answered before, so I would appreciate just a link to that discussion....
View ArticleSelective voicemail to email?
@cramermp wrote: Running 10.13.66-13, Asterisk 13, freepbx distro. When I leave a voicemail for a certain extension after calling from external, the message is recorded normally and an email is sent...
View ArticlePRI Call Setup
@besperson wrote: Hey FreePBX Experts. I have a FreeBPX system version 5.211.65.21 on Asterisk 11.14.2 with a Sangoma single port PRI card (A101). Things are working, calls are routing etc, but I have...
View Article