Set phone to not resync with pbx for configuration
@penny01 wrote: We currently use some variety grandstream SIP phones such as the gxp2130. They're provisioned using EPM. When setting the speed dial buttons on the phone the settings are erased within...
View ArticleWhy register multiple lines on same phone to same extension?
@justinm001 wrote: We just picked up a client that for some reason the phones have 3 lines/accounts (yealink phones) all registered with the same extension. This is on all their phones, is there a...
View ArticleIssues with Gateway and VOIPswitch
@mllopis wrote: Hi, I need someone help! its really urgent I have two GXW4108 controled by a VoipSwitch The thing is that not all the calls I send gets connected, just some of them. I do not know if I...
View ArticleCisco 7960 Phones have no audio in either direction on Inbound calls
@seanmowen wrote: We are using a hosted FreePBX provider. We have Cisco SPA504G phones working fine with this provider. However, our 7960s will only make outbound calls with no issue. Any Inbound call...
View ArticlePBXact 100 not detecting A400 FXO card
@gwntc wrote: I got a brand new PBXact 100. I am trying to setup the A400 card with FXO ports that came preinstalled but the system won't detect it. I have tried to reboot, tried running...
View ArticleClik here to view.
Outbound Calling to Sipgate
@nano94 wrote: Hi guys, currently I can't take any calls outgoing to sipgate DE. Following my outboung sip settings and the outbound route....
View ArticleStreaming MOH don't need to convert
@adtopkek wrote: I've been able to get streaming MOH to work when I feed mpg123 an MPEG2 / 24khz but then I have to make the server convert it into a compatible format. The device I am streaming off...
View ArticleRing Group trouble transferring if new call is answered by another extension...
@jestep wrote: FreePBX 13.0.192.16 Ring Groups 13.0.23Sangoma S500 There is a ring group that goes to 4 extensions for our main office. Then a secondary ring group gets called on no answer from the...
View ArticlePaggin vs Multicast
@edoma wrote: Hello I have enabled the paggin function in my system, I saw in another post the same problem with AAstra phones, in our case it is with Grandstream phones.GXP2140, GXP1625 in their...
View ArticleDial by voice directory?
@jcroy wrote: I'm looking around for a dial by voice directory. What I've found on the forums/google seems to be a little outdated. Looking for the ability for an ivr to point to a directory where...
View ArticleGrandstream GXP2130 - login / logout with softkey
@jkeller wrote: Hi, We have some Grandstream GXP2130 phones that we need to use for multiple extensions and would like to have the user log in / log out of the phone when they are at that location. Is...
View ArticleClik here to view.
Find out phone number of sim cards inside a Gsm Gateway
@Trezeguet17 wrote: Hi people, i hope you doing good. Today i have a question for you, how can i make to find out the phone number of every sim card inside GSM Gateway brand Lyric , i only see IMSI...
View ArticleFXO lines busy on FreePBX
@Altocloud1 wrote: I'm using a new Sangoma appliance for FreePBX with the A200-A20001DE analog card. The line seems to be held after the call ends. I am asking the carrier about supervised disconnect...
View ArticleSecond Dial Tone on DAHDI Trunk
@datasponge wrote: First post and not sure if there is a better category, so apologies in advance. We are trying to route outbound calls to a DAHDI trunk to go out via a landline on a Sangoma A200...
View ArticleAWS - How much do you need?
@GSnover wrote: In looking through the posts, it seems several people have FreePBX running in Amazon Web Services - But I would like some specific information from people running there such as: 1)...
View ArticlePlay recording when dialing SOME outbound numbers
@nsumner wrote: I have a strange problem/requirement. My client had 3 digit internal extensions due to a historical mistake. When the PBX blew up we decided the time was right to switch to 4 digit...
View ArticleNo dial tone on FXS port
@jamesnurse wrote: Hi all, I seem to have an issue where I cannot get a dial tone through the FXS port on my Sangoma A200 card. The card has 2 fxs ports and 2 fxo ports, the fxo ports have two phone...
View ArticleConfigure same extension more than 1 times in freePbx
@chandans wrote: Hi,Can anyone tell me how can we create same extension in multiple tenancy using freepbx on asterisk server? thanks in advance. Posts: 9 Participants: 5 Read full topic
View ArticleClik here to view.
Zulu install and config via Ansible
@ppmsystems wrote: Hi, I have Zulu 2.1.11 Client installed on Ubuntu 16.04 LTS Workstation. It works Now I would like to automate the installation and configuration using Ansible. So to be more...
View ArticleLet's Encrypt Error
@mvogel4949 wrote: I am unable to generate a Let's Encrypt Certificate and am receiving the following error. There was an error updating the certificate: Error 'Requested host 'voipserver.cqsimple'...
View Article