Remote secretary
@frouty wrote: Hi, I use a remote secretary. So now freepbx forward all incoming call (from a pots line) to a miscellaneous destination on pots line. But although it is an incoming call I pay for the...
View ArticleCrashing the network by dialing a number
@wspence wrote: I am somehow crashing an entire network, with the symptoms of a network loop.somewhat crazy but if i dial the extension to extension its fine.if i dial from internal extension to DID...
View ArticleSangoma Vega 50 FXS touch tone
@BCS_Inc_WORMA wrote: Is there a way to allow FXS ports to pass touch tone digits during a call? We test PBX systems and use the Vega 50 FXS ports to simulate outside dial tone. Sometimes we need to...
View ArticleAsterisk Friendly Telcos in the UK
@marcusjackson wrote: I'm looking for an Asterisk/FreePBX friendly Telco in the UK who can provide London numbers and preferably also support the IAX2 protocol rather than just SIP trunks. Does...
View ArticleError in `/usr/sbin/asterisk': double free or corruption (out)
@bigmillz wrote: Not quite sure where to begin with this error. Just migrated a standalone 13 Centos install to 14 Distro. Worked fine until I restarted the system, and now I get this when I...
View ArticleHelp with FreePBX and D130P OpenVOX
@lavariega wrote: Hi!I need to configure a D130P openvox with freepbx. The OS show the card with the command "lspci" 03:00.0 Network controller: OpenVox Communication Co. Ltd. D130P/D130E Single-port...
View ArticleEndpoint Manager - Adding Mac addresses for Network Scan
@ted1111 wrote: In the process of moving my old Freepbx to a new build. I purchased the endpoint manager and when scanned my subnet for phones. Only about 1/2 of the phones were shown. In the past I...
View ArticleWrite Distro ISO to USB
@naamanf wrote: How should I be writing the latest distro ISO to a USB for install? Posts: 8 Participants: 4 Read full topic
View ArticleUnable to Generate MOTD on New Install
@naamanf wrote: Installing latest distro from USB and it looks like it installs fine but when login to root there is a Unable to Generate MOTD errorThe /usr/sbin/fwconsole file is not accessible any...
View ArticlePBX to PBX custom extension external number voicemail configuration
@kg4geq wrote: I have 2 FreePBX servers (let's call PBX1 and PBX2) that are connected via IAX2 trunk and can successfully dial extensions between each other. On PBX1 I have 4digit custom extensions...
View ArticleCaller ID set from device or another asterisk
@micom67 wrote: Hi freepbx my problem is I would like set caller ID from another device or asterisk. 1.i have 1 extension 12345 this extension i have setup on another asterisk this asterisk send...
View ArticleMultiple Fax Caller ID
@hshamallakh wrote: Hi, How to setup fax Pro module so that different users have access to it but at a different caller id. I do understand I can put dial prefix (ex: 9) to choose a specific route,...
View ArticleEndpoint Information missing from Extensions
@dennischaplin wrote: New install of 13.17There is no endpoint information to like MAC, Phone manufacturer, template or Model any longer.Did it move or? Posts: 1 Participants: 1 Read full topic
View ArticleClik here to view.
Strange Caller Dialed Number Behavior
@mrt419 wrote: Hello All, We recently switched 3 of our locations PRI Service to Spectrum Enterprise from our another company. These are connected to our FreePBX server via a Sangoma A102 PRI card....
View ArticlePaging and Intercom with Valcom
@zillion08 wrote: Hi Everyone, I am attempting to setup an paging/intercom that goes to a Valcom intercom system for school bells. I will say the Valcom system works great when dialing its extension...
View ArticleiSymphony Stuck Calls
@ppmsystems wrote: I keep having stuck calls showing in iSymphony Client I have confirmed that there are no Asterisk channels stuck and even despite having 0 active channels and 0 active calls these...
View ArticleCan't get port 5060 open in new 14 distro install
@bigmillz wrote: Just migrated to 14 distro from 13 on Centos. After some issues with the migration, I've got it working, but port 5060 isn't open. My endpoints can't connect, and port scanners report...
View ArticleDestination: Send through inbound route
@adtopkek wrote: We are having this parking issue: https://issues.freepbx.org/browse/FREEPBX-15386 Now we are unable to make any new parking lots. We now have the plan of reducing the number of...
View ArticleHA partition drbd/asterisk 90%
@mvogel4949 wrote: Should I be concerned if one of my HA partitions drbd/asterisk is hitting 90% and above? I'm assuming this might cause issues with a production system. Posts: 1 Participants: 1 Read...
View ArticleAssistance request - Possible virus on PBX
@probegtze wrote: Hi! I need assistance figuring out what is happening on my PBX. I recently changed my firewall/Router. We were using a RV042G and upgraded to a Fortigate 60. At first, the upgrade...
View Article