Howto - Only 1 active call at the same time
@mitterhuemer wrote: Hello,i have a customer who wants to have configured a Ringall Group or Queue with about 6 Phones. If 1 call is already answered elsewhere, than noone else should call him anymore...
View ArticleStop fail-over to backup trunk unless main trunk goes offline
@Kellpro wrote: PBXact-13.0.192.18 / FreePBX 13.17.1 - We're a small company with one outbound route using a single primary trunk with a backup trunk (more expensive) in case the primary trunk goes...
View ArticleYealink SIP-T46S notification light
@Dashrender wrote: I have a brand new FreePBX 14 (Asterisk 13) setup with 10 phones attached. My users are reporting that they all have the notification light lit when they arrive in the morning...
View ArticleHow to setup SIP trunk + inbound and outbound
@mstitdk wrote: Hallo I have this FreePBX server hosted at OPL.uk - and i want to add my two sip trunk with one number on each with two lines on. Problem 1:I have add one SIP trunk, as a test, as a...
View ArticleCall Recording from start to finish
@v3z0viz2si wrote: This question is in relation to the latest FreePBX 14.0.1.19 installed on a Raspberry Pi. Is there a way to record ALL incoming calls from the moment the PBX picks up the call until...
View ArticleForward Voicemal using Directory?
@jcroy wrote: One of our users reported that when they try to forward a voicemail using the dial by name directory it asks them for the name which they enter and nothing happens. I test to make sure...
View ArticleCallinize/Tenfold Softphone not registering externally
@sillsd4622 wrote: FreePBX 13.0.192.9Asterisk 11.25.1Tenfold/Callinize Softphone 2.4.0.25 I'm working to get the Callinize Softphone up and running and have it working internally. When I go to run the...
View ArticleCisco 7960 - How to use custom logo without CallManager
@luxartsystems wrote: Hey guys,Trust me, I have been Googling (is that a term?) for over 2 hours now, and I cannot find anything straightforward that tells me how I can upload an image to use an a...
View ArticleAudio on outbound calls only
@crazzzme wrote: Hey Everyone,I am having an issue with my install that may be related to nat but I am not sureWhen I make inbound calls to my SipStation Trunk I get no audio in either direction.If I...
View ArticleCall recording bitrate
@vespino wrote: I just found out setting the file format to wav49 (Settings => Voicemail Admin => General => File Format) results in voicemail files being saved in 13 kb instead of 128 kb...
View ArticleClik here to view.
Voicemail not working - Rebuild makes no diference
@downscnz wrote: Hey all, Apologies if this isn't the right board, I've researched this the last few days and none of the solutions I find are working. When calling *97 to go to Voicemail it dials and...
View ArticleChange extension outbound CID in database
@cholegmw wrote: Hello, I developing a WEB application in which I have the administration of 30 operators that use extensions on our IP PBX Asterisk/FreePBX.I accessing from the WEB application...
View ArticlePredictive Dialer configuration using Free Pbx Asterisk server
@chandans wrote: How can we configure Predictive Dialer option using freepbx (asterisk) Posts: 1 Participants: 1 Read full topic
View ArticleChanging Gateway Trunks are down
@faisalkhan wrote: My PBX server is working fine behind GW1 but when I changed it to GW2 all the trunks are down however we are using the same rule as per GW1. When I do nmap for port checking port is...
View ArticleClik here to view.
Max Message Silence default value (10ms instead of 10sec)
@chrischevy wrote: In Voicemail module, the default value for Max Message Silence used to be 10 secondsVoicemail module version 13.0.53.3 On some systems, after updating the voicemail module, this...
View ArticleRecord over extension
@scampbell wrote: When trying to record a system recording over an extension, the extension rings and my interface recognizes the extension has been answered. It states "recording is in progress,...
View ArticleActive Directory Login
@kzip2008 wrote: Hi All, I have setup freepbx to sync with our AD and create PJSIP extensions based on the IPphone attribute. Once the extensions are created, I can't seem to login. Is it possible to...
View ArticleClik here to view.
Ucp not installing/upgrading. Problems with ICU
@cyberrock wrote: Hello,I have Centos 6.5 running FREEPBX 14 UCP.png1159x214 5.75 KB For a few months, I have not been able to upgrade UCP and have constantly received this message when I try....
View ArticleUnknown CallerID
@aguywhoneedhelp wrote: Hello, Idk why but when i recive a call the callerid show as 'Unknown' For what i read that can happend if i change the dahdi configuration but i didnt, i compared old files...
View ArticleCalls dropping at around 15 minutes
@kwriley87 wrote: Hi There I am running FreePBX Distro 14 on Asterisk 11 We are having dropped calls at around the 15 minute mark. It isn't at 15 minutes exactly, usually around 15:20 or something...
View Article
