European ITSP With UK (London) phone numbers
@bksales wrote: we have US customer that is opening an office in London and has requested that we setup a london number for them and initially forward it to the employee cell phone. i am looking for a...
View ArticlePage group with 60 members yes or no
@avayax wrote: I am using the paging module to broadcast an alarm message to all SIP phones during a fire alert.So someone dials a paging group number and all phones auto answer (or via chanspy...
View ArticleClik here to view.
CDR disappeared overnight?
@mvogel4949 wrote: I had a system running FreePBX12 and Asterisk12. Everything had been great but then overnight my CDR has gone completely empty. This is all I see image.png1679x230 5.89 KB Posts: 2...
View ArticleSIP Trunk Problems
@djshades2004 wrote: My Trunk works when I allow anonymous sip calls, but soon as I turn it off I get: [2017-10-19 15:12:58] VERBOSE[2096][C-00000064] pbx.c: Executing [s@from-sip-external:6]...
View ArticleSipStation FreePBX feedback
@blakeryan126 wrote: Hello, I am new here. We are about to switch to Voip service from a traditional analog line. We are going to use the FreePBX platform with Sangoma. I was wondering if there is...
View ArticleDefault UCP dashboard
@plapierre wrote: Does anyone know if it's possible to setup a default UCP dashboard for all users? I have setup a new Freepbx V14 server and would like to setup a default UCP dashboard for the users....
View ArticleInsert incoming routes directly to databse, but no effect
@dcanivel wrote: Hi, I'm inserting the incoming routes dynamically to the database asterisk (table incoming), but it take no effect... I suppose I need to run an "apply" (mabe dialplan reload) so they...
View ArticleResponsive Firewall + Dynamic IP Address
@chrischevy wrote: Hi, I'm doing some tests with a clouded FreePBX and I have a question about the Responsive Firewall.It seems that the only way to get a remote extension to register is to add it's...
View ArticleNo audio remote extensions
@njbarraco wrote: Greetings, I have an issue with remote extensions. I am able to register the extension and call. Everything there seems to work. I do have port forwarding on ports 5060 tcp/udp and...
View ArticleCalls drop after 30 minutes
@charlie4616 wrote: Hi, We have an issue whereby calls drop after 30 minutes (not all but most), I am now stuck with what to do. When a call is active and it hits 30 minutes, the remote end drops but...
View ArticleFollow me issues
@utgard wrote: Hi All, We are currently using FreePBX and having some issues with call forwarding;Your Linux Distribution: (Debian 7.11)Your FreePBX version: (13.0.192.19) I'm unable to forward to any...
View ArticleRestored from back-up getting: Reload failed because retrieve_conf...
@AlphaJohn wrote: We had our PBX stolen and had to restore. Thanks for back-ups, or so I thought untill I installed official FreePBX 14 (what we where running before) with both Asterisk 13, also tried...
View ArticleAvaya 9630 MWI
@bbrentd wrote: Moved from Avaya IP office to Freepbx. I was able to get our older Avaya 9630 phones to work with Freepbx (version 13). I only have one little annoyance that I can not figure out. The...
View ArticleInstallation error Freepbx 14 + php 7 + MySQL5.7.9
@biofx wrote: Hi there, Guys! I am trying to install freepbx on a orangePi (Armhf proc) with an UBUNTU image (Armbian). I am following the steps from the page...
View ArticleOverride Caller ID to one EXT
@tigger1197 wrote: Heres the setup: Ext 10 is in ring group 11Ext 20 is in ring group 21 Ext 10 calls ext 30 but wants the caller id to show up 11Ext 20 calls ext 30 but wants the caller id to show up...
View ArticleFollow me issues with IVR
@DamianB wrote: Hi There, I have a new FreePBX and I am just setting up some IVR. One IVR branch is designed to go to an extension, which then has follow me set up to my mobile (cell). When I dial...
View ArticleSangoma a200 noise
@jangy wrote: hello,I have a sangoma a200 with ec and 1 fxs, 1 fxo.On the line fxo there are noise and in the fxs extension there are a lot of noise.Can i resolve the problem??Thanks Posts: 1...
View ArticleClik here to view.
Chan_pjsip.c:844 chan_pjsip_write: Can't send 10 type frames with PJSIP
@Marc21 wrote: Hi, Every time I make a phone call, I get hundreds of WARNING errors in the Asterisk logs. The call goes through fine, I would just like to know is there a way to stop this. All of my...
View ArticleFreePBX + VVX400 phone
@sthomex wrote: Hi, tried to find answer for my question before asking. I have a freepbx system, multiple VVX phone from polycom. Im having issues, one of the 2 dispatch, both on the same ring group,...
View ArticleUpgraded from elastix
@bradlarose wrote: I posted this in a different topic but not getting much help..... I used elastix and the FreePbx extension and was updated modules through FreePBX.I updated the core and now I can...
View Article