@luke1 wrote:

We have a Sangoma PBX and our FXO ports show correctly in DAHDI Config under FXO settings, but in the Asterisk cli they show as:

Signalling Type: FXS Kewlstart under:

freepbx*CLI> dahdi show channel 2

Which is am FXO port. Am i missing something.

We looked into this as trying to use that port we cannot call into the PBX at all. And the PBX doesn’t not seem to pick up the call. But the line works as we plugged an analog phone into it and it rings if called. But not if plugged into the PBX.

Thanks

Posts: 7

Participants: 3

Read full topic

@gbaughma wrote:

I’m trying to make an informed decision on replacing our PRI with a bunch of SIP trunks. Now, according to our provider, these sip trunks a) are separate bandwidth from our internet, and b) support T.38 faxing.

We receive about 2000 fax pages a week. We send out about 400-500.

We’re currently using HylaFax for both sending and receiving/routing. It’s working well, with 8 IAX modems and <1% failure.

Thoughts? Do’s and Don’ts? Has anyone had experience with the T.38 protocol? Do I dare try to do that many faxes over SIP?

I’d love to hear someone’s experiences with faxing.

Thank you!

Posts: 2

Participants: 2

Read full topic

@gmhicks5867 wrote:

I am testing out FreePBX as my company may be looking to move over to an Asterisk platform from Cisco Communications Manager. We have a large number of 8841 phones that are not part of the auto distribution in FreePBX. I pulled the config here from CUCM and was hoping someone here has used them and could recommend modifications for it to work with Freepbx.

<?xml version="1.0" encoding="UTF-8"?> true MPCUPSPUB SIP userid Password 0 true true false false 0 0 2016d tzupdater.jar 000000 Off Disabled false 0 Central_DP Central M-D-YA Central Standard/Daylight Time America/Chicago 10.8.32.200 Directed Broadcast CUCMGroup2 false mpcucmsub2.company.com CM_mpcucmsub2.company.com 2000 5060 5061 2427 2428 mpcucmsub2.company.com mpcucmsub1.company.com CM_mpcucmsub1.company.com 2000 5060 5061 2427 2428 mpcucmsub1.company.com bldcucmsub1.company.com CM_bldcucmsub1.company.com 2000 5060 5061 2427 2428 bldcucmsub1.company.com Disable Disable false 2000 2000 2000 5060 5060 5060 false 120 2445 mpcucmsub2.company.com 2445 mpcucmsub1.company.com 2445 bldcucmsub1.company.com USECALLMANAGER 5060 USECALLMANAGER 5060 USECALLMANAGER 5060 true true x-cisco-serviceuri-cfwdall x-cisco-serviceuri-pickup x-cisco-serviceuri-opickup x-cisco-serviceuri-gpickup x-cisco-serviceuri-meetme x-cisco-serviceuri-abbrdial false 2 1 true true 2 2 0 true false 6 10 180 3600 5 120 120 5 500 4000 70 true None 1 false true false false none 101 3 avt 3 2 true 15000 7000 10 true false 16384 32766 0 0 .company.com 9 Gary Hicks USECALLMANAGER 5060 3128803856 ghicks@.company.com Gary Hicks 2 3 true 3 0 3699 4 5 d9c5921c-e125-4835-b456-82aadcc459d5 false false false false 6 2 2 Missy 912197717521 1 2 ZOOM MEETING DIAL IN 916465588656 3 312880XXXX 5060 184 136 136 128 128 180 176 164 168 168 156 148 140 132 132 0 SKf7d487ab-f263-6086-cf8f-d6c86ea9c08c.xml false false 10 false 2 sip88xx.11-5-1SR1-1 sip88xx.11-5-1-18 falsefalse0000010050000001001 10Huron_Logo.png 1555348576-9c0e21fb-b32b-47b6-b107-5503eaac0cf2 English_United_States 1 en_US 11.0.0.0(1) iso-8859-1 United_States United_States 64 11.0.0.0(1) 1 0 http://MPCUCMPUB.company.com:8080/ccmcip/authenticate.jsp http://MPCUCMPUB.company.com:8080/ccmcip/xmldirectory.jsp http://MPCUCMPUB.company.com:8080/ccmcip/GetTelecasterHelpText.jsp http://MPCUCMPUB.company.com:8080/ccmcip/getservicesmenu.jsp https://10.12.50.10:8443/ccmcip/authenticate.jsp https://10.12.50.10:8443/ccmcip/xmldirectory.jsp https://10.12.50.10:8443/cucm-uds/users https://10.12.50.10:8443/ccmcip/GetTelecasterHelpText.jsp https://10.12.50.10:8443/ccmcip/getservicesmenu.jsp 96 0 96 4 1 5 0 0 0 0 false 0 0 0 3804 false 1 *81 *82 *83 *84 *85 3600 ghicks ghicks 0 Missed Calls Application:Cisco/MissedCalls Voicemail Application:Cisco/Voicemail Received Calls Application:Cisco/ReceivedCalls Placed Calls Application:Cisco/PlacedCalls Personal Directory Application:Cisco/PersonalDirectory Corporate Directory Application:Cisco/CorporateDirectory

Posts: 2

Participants: 2

Read full topic

@Dhadz wrote:

Hi everyone,

i need to play a sound on all the phones when i call a ring group. That´s all

Doing the research its supposed that when u have an announcement configured on a ring group when you call the ring group the wav file reproduces. but i try and nothing happens, i already use auto answer and the phone hears me.

Well in our school have some colors to identify about city risk (our city is kind of insecure) but we want to implement a sound so everyone go inside and shelter. We have phones in every classroom , library, etc . We wanto to call a number (code) and a sound (alarm) rings in every phone. I read something about paging pro but i still dont get it clear. Any info would be appreciated.

page settings.PNG920×212 11.7 KB

Posts: 3

Participants: 2

Read full topic

@Sas wrote:

Hello.

I have 2 freepbx servers, ver. 14.0.10.3. They are configured. I connected that 2 servers via SIP trunk.
It works, and when I enter sip show registry, it show that it is registered.

But, when I enter sip show peers command, STATUS = UNKNOWN:

In SIP trunk - SIP settings - Outgoing:
For 1-st pbx:
username=ap2trunk
type=friend
secret=*******
nat=yes
insecure=invite,port
host=dynamic
qualify=yes
context=from-internal&from-internal
disallow=all
canreinvite=no
allow=speex,alaw,gsm

For 2-nd pbx:
username=ap1trunk
type=friend
secret=*******
nat=yes
insecure=invite,port
host=dynamic
qualify=yes
context=from-internal&from-internal
disallow=all
canreinvite=no
allow=speex,alaw,gsm

all.jpg1361×918 213 KB

How to solve this problem? I need STATUS = OK. How to do this?

Thank you.

Posts: 2

Participants: 1

Read full topic

@XARIS33 wrote:

I’m getting all lines are busy message, log output below:

– Executing [735803@from-internal:1] Macro(“SIP/201-0000001c”, “user-callerid,LIMIT,EXTERNAL,”) in new stack
– Executing [s@macro-user-callerid:1] Set(“SIP/201-0000001c”, “TOUCH_MONITOR=1556004689.28”) in new stack
– Executing [s@macro-user-callerid:2] Set(“SIP/201-0000001c”, “AMPUSER=201”) in new stack
– Executing [s@macro-user-callerid:3] GotoIf(“SIP/201-0000001c”, “0?report”) in new stack
– Executing [s@macro-user-callerid:4] ExecIf(“SIP/201-0000001c”, “1?Set(REALCALLERIDNUM=201)”) in new stack
– Executing [s@macro-user-callerid:5] Set(“SIP/201-0000001c”, “AMPUSER=201”) in new stack
– Executing [s@macro-user-callerid:6] GotoIf(“SIP/201-0000001c”, “0?limit”) in new stack
– Executing [s@macro-user-callerid:7] Set(“SIP/201-0000001c”, “AMPUSERCIDNAME=Transfers”) in new stack
– Executing [s@macro-user-callerid:8] ExecIf(“SIP/201-0000001c”, “0?Set(__CIDMASQUERADING=TRUE)”) in new stack
– Executing [s@macro-user-callerid:9] GotoIf(“SIP/201-0000001c”, “0?report”) in new stack
– Executing [s@macro-user-callerid:10] Set(“SIP/201-0000001c”, “AMPUSERCID=201”) in new stack
– Executing [s@macro-user-callerid:11] Set(“SIP/201-0000001c”, “__DIAL_OPTIONS=HhTtr”) in new stack
– Executing [s@macro-user-callerid:12] Set(“SIP/201-0000001c”, “CALLERID(all)=“Transfers” <201>”) in new stack
[2019-04-23 10:31:29] WARNING[1494][C-0000000b]: ast_expr2.fl:470 ast_yyerror: ast_yyerror(): syntax error: syntax error, unexpected ‘>’, expecting ‘-’ or ‘!’ or ‘(’ or ‘’; Input:
"LIMIT"=“LIMIT” & 3 & 0 & >0 & 0>=
** ^**
[2019-04-23 10:31:29] WARNING[1494][C-0000000b]: ast_expr2.fl:474 ast_yyerror: If you have questions, please refer to https://wiki.asterisk.org/wiki/display/AST/Channel+Variables
– Executing [s@macro-user-callerid:13] GotoIf(“SIP/201-0000001c”, “0?limit”) in new stack
– Executing [s@macro-user-callerid:14] ExecIf(“SIP/201-0000001c”, “1?Set(GROUP(concurrency_limit)=201)”) in new stack
– Executing [s@macro-user-callerid:15] ExecIf(“SIP/201-0000001c”, “0?Set(CHANNEL(language)=)”) in new stack
– Executing [s@macro-user-callerid:16] NoOp(“SIP/201-0000001c”, “Macro Depth is 1”) in new stack
– Executing [s@macro-user-callerid:17] GotoIf(“SIP/201-0000001c”, “1?report2:macroerror”) in new stack
– Goto (macro-user-callerid,s,18)
– Executing [s@macro-user-callerid:18] GotoIf(“SIP/201-0000001c”, “1?continue”) in new stack
– Goto (macro-user-callerid,s,37)
– Executing [s@macro-user-callerid:37] Set(“SIP/201-0000001c”, “CALLERID(number)=201”) in new stack
– Executing [s@macro-user-callerid:38] Set(“SIP/201-0000001c”, “CALLERID(name)=Transfers”) in new stack
– Executing [s@macro-user-callerid:39] GotoIf(“SIP/201-0000001c”, “0?cnum”) in new stack
– Executing [s@macro-user-callerid:40] Set(“SIP/201-0000001c”, “CDR(cnam)=Transfers”) in new stack
– Executing [s@macro-user-callerid:41] Set(“SIP/201-0000001c”, “CDR(cnum)=201”) in new stack
– Executing [s@macro-user-callerid:42] Set(“SIP/201-0000001c”, “CHANNEL(language)=gr”) in new stack

Any ideas?

Posts: 1

Participants: 1

Read full topic

@CraigT wrote:

Hi all,
First post and stressed! FreePBX 14.0.10.3 I am not fluent with Linux and have relied on the wiki and this board for info in the past, much more Windows based after 30+years of support. I have just updated several systems with the latest updates, both modules and CentOs, to discover suddenly the System Firewall is not running and not enabled. These systems have run for over a year being reliable with no issues, and being updated as required. The last update seem to have broken them. You can’t enable the firewall without an error, or uninstall then re-install without a similar script error. I have tried all the command options posted previously but to no avail. They fail with an error that Incron failed to pick up a file after 5 seconds. I did capture this when trying to enable:

image.png1680×1750 207 KB

Any help would be appreciated!

Posts: 3

Participants: 2

Read full topic

@admiri92 wrote:

After configuring sip trunk and adding an extension, I am able to receive incoming calls, but I can make outgoing calls, i keep receiving the error “All circuits are busy now, call again later”.

Peer details:

host=dynamic
secret=password1234
type=friend
context=from-trunk

I have configured an outbound route. FreePBX on a virtual machine.
Asterisk Version: 13.22.0
What is causing this type of error?

Posts: 1

Participants: 1

Read full topic

@comtech wrote:

Asterisk/FreePBX 14

Hello,

The account codes we are putting into the field appear to be one character longer than the field can take. This is my observation based on pulling the CDR and seeing the account code be one character short.

Is there a way to adjust this so I can still use the FreePBX CDR?

Posts: 1

Participants: 1

Read full topic

@ddussaultce wrote:

Good day

I have purchased a couple of months ago the everything bundle and installed only a couple of modules. Now I need to install more but can’t get them to recognize they are purchased already.

I tried the update activation but shows only the modules installed and when I go to install the modules the only option I have is buy.

What am I missing ?

Thanks

Posts: 2

Participants: 2

Read full topic

@dobrosavljevic wrote:

I’ve found the other posts detailing other instances of this error and none of them seem to apply to my situation as none of the suggestions help get me past that error message. Here is the full output of the yum update -y command:

Loaded plugins: fastestmirror, versionlock
Loading mirror speeds from cached hostfile
sng-base | 3.6 kB 00:00
sng-epel | 4.7 kB 00:00
sng-extras | 3.4 kB 00:00
sng-pkgs | 3.4 kB 00:00
sng-updates | 3.4 kB 00:00
Resolving Dependencies
–> Running transaction check
—> Package asterisk-version-switch.noarch 0:5.1-2.sng7 will be updated
—> Package asterisk-version-switch.noarch 0:5.2-1.sng7 will be an update
—> Package audit.x86_64 0:2.8.1-3.el7 will be updated
—> Package audit.x86_64 0:2.8.1-3.el7_5.1 will be an update
—> Package audit-libs.x86_64 0:2.8.1-3.el7 will be updated
—> Package audit-libs.x86_64 0:2.8.1-3.el7_5.1 will be an update
—> Package bind-libs.x86_64 32:9.9.4-61.el7 will be updated
—> Package bind-libs.x86_64 32:9.9.4-61.el7_5.1 will be an update
—> Package bind-libs-lite.x86_64 32:9.9.4-61.el7 will be updated
—> Package bind-libs-lite.x86_64 32:9.9.4-61.el7_5.1 will be an update
—> Package bind-license.noarch 32:9.9.4-61.el7 will be updated
—> Package bind-license.noarch 32:9.9.4-61.el7_5.1 will be an update
—> Package bind-utils.x86_64 32:9.9.4-61.el7 will be updated
—> Package bind-utils.x86_64 32:9.9.4-61.el7_5.1 will be an update
—> Package device-mapper-multipath.x86_64 0:0.4.9-119.el7 will be updated
—> Package device-mapper-multipath.x86_64 0:0.4.9-119.el7_5.1 will be an update
—> Package device-mapper-multipath-libs.x86_64 0:0.4.9-119.el7 will be updated
—> Package device-mapper-multipath-libs.x86_64 0:0.4.9-119.el7_5.1 will be an update
—> Package dracut.x86_64 0:033-535.el7 will be updated
—> Package dracut.x86_64 0:033-535.el7_5.1 will be an update
—> Package dracut-network.x86_64 0:033-535.el7 will be updated
—> Package dracut-network.x86_64 0:033-535.el7_5.1 will be an update
—> Package firewalld.noarch 0:0.4.4.4-14.el7 will be updated
—> Package firewalld.noarch 0:0.4.4.4-15.el7_5 will be an update
—> Package firewalld-filesystem.noarch 0:0.4.4.4-14.el7 will be updated
—> Package firewalld-filesystem.noarch 0:0.4.4.4-15.el7_5 will be an update
—> Package ghostscript.x86_64 0:9.07-28.el7_4.2 will be updated
—> Package ghostscript.x86_64 0:9.07-29.el7_5.2 will be an update
—> Package htop.x86_64 0:2.2.0-1.el7 will be updated
—> Package htop.x86_64 0:2.2.0-3.el7 will be an update
—> Package incron.x86_64 0:0.5.10-10.sng7 will be updated
—> Package incron.x86_64 0:0.5.12-11.el7 will be an update
—> Package initscripts.x86_64 0:9.49.41-1.el7 will be updated
—> Package initscripts.x86_64 0:9.49.41-1.el7_5.2 will be an update
—> Package java-1.8.0-openjdk.x86_64 1:1.8.0.181-3.b13.el7_5 will be updated
—> Package java-1.8.0-openjdk.x86_64 1:1.8.0.191.b12-0.el7_5 will be an update
—> Package java-1.8.0-openjdk-headless.x86_64 1:1.8.0.181-3.b13.el7_5 will be updated
—> Package java-1.8.0-openjdk-headless.x86_64 1:1.8.0.191.b12-0.el7_5 will be an update
—> Package kernel.x86_64 0:3.10.0-862.14.4.el7 will be installed
—> Package kernel-headers.x86_64 0:3.10.0-862.9.1.el7 will be updated
—> Package kernel-headers.x86_64 0:3.10.0-862.14.4.el7 will be an update
—> Package kexec-tools.x86_64 0:2.0.15-13.el7 will be updated
—> Package kexec-tools.x86_64 0:2.0.15-13.el7_5.2 will be an update
—> Package kpartx.x86_64 0:0.4.9-119.el7 will be updated
—> Package kpartx.x86_64 0:0.4.9-119.el7_5.1 will be an update
—> Package libblkid.x86_64 0:2.23.2-52.el7 will be updated
—> Package libblkid.x86_64 0:2.23.2-52.el7_5.1 will be an update
—> Package libmount.x86_64 0:2.23.2-52.el7 will be updated
—> Package libmount.x86_64 0:2.23.2-52.el7_5.1 will be an update
—> Package libuuid.x86_64 0:2.23.2-52.el7 will be updated
—> Package libuuid.x86_64 0:2.23.2-52.el7_5.1 will be an update
—> Package mariadb.x86_64 1:5.5.56-2.el7 will be updated
—> Package mariadb.x86_64 1:5.5.60-1.el7_5 will be an update
—> Package mariadb-libs.x86_64 1:5.5.56-2.el7 will be updated
—> Package mariadb-libs.x86_64 1:5.5.60-1.el7_5 will be an update
—> Package mariadb-server.x86_64 1:5.5.56-2.el7 will be updated
—> Package mariadb-server.x86_64 1:5.5.60-1.el7_5 will be an update
—> Package mokutil.x86_64 0:12-1.el7.centos will be updated
—> Package mokutil.x86_64 0:12-2.el7 will be an update
—> Package nss.x86_64 0:3.36.0-5.el7_5 will be updated
—> Package nss.x86_64 0:3.36.0-7.el7_5 will be an update
—> Package nss-sysinit.x86_64 0:3.36.0-5.el7_5 will be updated
—> Package nss-sysinit.x86_64 0:3.36.0-7.el7_5 will be an update
—> Package nss-tools.x86_64 0:3.36.0-5.el7_5 will be updated
—> Package nss-tools.x86_64 0:3.36.0-7.el7_5 will be an update
—> Package openvpn.x86_64 0:2.4.6-1.el7 will be updated
—> Package openvpn.x86_64 0:2.4.7-1.el7 will be an update
—> Package python-firewall.noarch 0:0.4.4.4-14.el7 will be updated
—> Package python-firewall.noarch 0:0.4.4.4-15.el7_5 will be an update
—> Package python-perf.x86_64 0:3.10.0-862.9.1.el7 will be updated
—> Package python-perf.x86_64 0:3.10.0-862.14.4.el7 will be an update
—> Package redis.x86_64 0:3.2.12-1.el7 will be updated
—> Package redis.x86_64 0:3.2.12-2.el7 will be an update
—> Package selinux-policy.noarch 0:3.13.1-192.el7_5.4 will be updated
—> Package selinux-policy.noarch 0:3.13.1-192.el7_5.6 will be an update
—> Package selinux-policy-targeted.noarch 0:3.13.1-192.el7_5.4 will be updated
—> Package selinux-policy-targeted.noarch 0:3.13.1-192.el7_5.6 will be an update
—> Package shim-x64.x86_64 0:12-1.el7.centos will be updated
—> Package shim-x64.x86_64 0:12-2.el7 will be an update
—> Package systemd.x86_64 0:219-57.el7 will be updated
—> Package systemd.x86_64 0:219-57.el7_5.3 will be an update
—> Package systemd-libs.x86_64 0:219-57.el7 will be updated
—> Package systemd-libs.x86_64 0:219-57.el7_5.3 will be an update
—> Package systemd-sysv.x86_64 0:219-57.el7 will be updated
—> Package systemd-sysv.x86_64 0:219-57.el7_5.3 will be an update
—> Package tuned.noarch 0:2.9.0-1.el7 will be updated
—> Package tuned.noarch 0:2.9.0-1.el7_5.2 will be an update
—> Package tzdata.noarch 0:2018e-3.el7 will be updated
—> Package tzdata.noarch 0:2018f-2.el7 will be an update
—> Package tzdata-java.noarch 0:2018e-3.el7 will be updated
—> Package tzdata-java.noarch 0:2018f-2.el7 will be an update
—> Package util-linux.x86_64 0:2.23.2-52.el7 will be updated
—> Package util-linux.x86_64 0:2.23.2-52.el7_5.1 will be an update
—> Package yum.noarch 0:3.4.3-158.7.sng7 will be updated
—> Package yum.noarch 0:3.4.3-161.9.sng7 will be an update
–> Finished Dependency Resolution
–> Running transaction check
—> Package kernel.x86_64 0:3.10.0-693.21.1.el7 will be erased
–> Processing Dependency: kernel(napi_complete_done) = 0x905307be for package: kmod-via-rhine-1.5.2-1.sng7.x86_64
–> Processing Dependency: kernel(napi_complete_done) = 0x905307be for package: kmod-via-velocity-1.16-1.sng7.x86_64
–> Running transaction check
—> Package kmod-via-rhine.x86_64 0:1.5.2-1.sng7 will be erased
–> Processing Dependency: kmod-via-rhine for package: sangoma-pbx-1902-3.sng7.noarch
—> Package kmod-via-velocity.x86_64 0:1.16-1.sng7 will be erased
–> Running transaction check
—> Package sangoma-pbx.noarch 0:1902-3.sng7 will be erased
–> Finished Dependency Resolution
Error: Trying to remove “sangoma-pbx”, which is protected

Posts: 4

Participants: 3

Read full topic

@mvogel4949 wrote:

Is there a date range when the mobile app for zulu 3 will not be labeled beta?

Posts: 1

Participants: 1

Read full topic

@kvhodson wrote:

Back in January we updated the modules on our production freepbx server. The next day we noticed that the school multicast page no longer worked. We have mostly Digium phones with some Sangoma and many speakers (Algo and Valcom) and none of these devices played the sound. We were busy at that time and so I looked at what was updated and rolled back modules until it started working again. I did not write down which module it was that caused the problem. (My mistake). We have not updated the server since. I have time now and have spun up a new test server with a clean install. All modules are up to date and test phones are on their newest firmware. We are using Paging Pro and have set up a page (#88888) as a multicast page and set a schedule. I have dialed 88888 and the phones pick up and play the wav file. This works great. However, when the schedule runs I see it happening in the log file and the phones pick up but promptly hang up without playing the wav file. I have researched and have been unable to find a solution. How can we get this working again so we can update our production server.

I have narrowed down to two modules the likely culprit. It is either “Framework” or “Core”.

Module Production Version Test Version
Framework 14.0.5.25 14.0.10.3
Core 14.0.18.45 14.0.25.4
Paging Pro 14.0.2.10 14.0.2.15

As I mentioned above the Production is currently working on older modules and the Test does not work. I have not figured out how to rollback the modules on the test as they are not available in the GUI beyond when I created the fresh install.

I tried pasting the log file here but I am a new user and it blocked me from doing so because it has lines that look like links.

Any suggestions?

Posts: 1

Participants: 1

Read full topic

@DinGoBlue wrote:

I have tried with zero success to provision 5 x W56H handsets via a W60B base station. It must be something I am missing in all the researched articles that I have found and therefore time to ask for an “idiots guide” on how to accomplish this.

I have tried using EPM and provisioning manually, I would prefer the former if at all possible.
I have tried after doing a factory reset on the W56H’s and the W60B.

I am using:
Freepbx 14.0.10.3
Asterisk 16.3.0
Endpoint Manager (commercial) 14.0.2.188
All firmware in the W60B and W56H’s are the latest versions.

I have provisioned some 50 Yealink T46S handsets using EPM with great success.
When I connect the W60B, I do a network scan in EPM and find the W60B but that is clearly not of much use.
I have manually registered the handsets in the W60B but cannot see them in EPM. I have tried setting the server url in the W60B but no change.

If the W60B needs to be configured as a Base Station in EPM I can see no way to do this as there is no associated template.

ANY assistance would be appreciated and may go some way to restoring my (in)sanity!
Regards

Posts: 1

Participants: 1

Read full topic

@hunterman wrote:

Hello everyone
Whats the problem in astersik when the CPU go to 100% temporarily for a few seconds, The result in Naturally mode:
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
2543 asterisk 20 0 5336564 864908 20932 S 12.3 10.8 2703:26 asterisk
14336 asterisk 20 0 664288 45220 23172 S 7.0 0.6 0:09.47 httpd
14323 asterisk 20 0 664692 49348 27032 S 5.0 0.6 0:03.55 httpd
1375 mysql 20 0 2352292 292236 9788 S 3.0 3.6 848:42.00 mysqld
1400 mongodb 20 0 482832 39076 4636 S 0.7 0.5 253:51.05 mongod
5092 asterisk 20 0 1084756 47576 14364 S 0.7 0.6 1:27.42 node /var/www/h
32128 asterisk 20 0 422376 43088 10976 S 0.7 0.5 0:38.58 php
738 root 20 0 21672 1104 972 S 0.3 0.0 4:14.70 irqbalance
2165 root 20 0 162104 2296 1580 R 0.3 0.0 0:08.28 top
9590 root 20 0 0 0 0 S 0.3 0.0 0:20.97 kworker/u16:1

When the CPU go to 100% all employees suffer from a problem in interrupting calls and returning to normal in the same line phone.
Note: Knowing that the server was working normally two months ago and there are no problems but the problem Appeared two days ago
the result

Capture2211.PNG713×166 7.46 KB

Capture2122111.PNG698×70 2.61 KB

Is there urgent assistance?

Posts: 6

Participants: 2

Read full topic

@Noppes wrote:

Hi, I have the same problem as user has descripted in the following topic:

Any suggestions? It worked for me in the last two years and suddenly I can’t send any messages anymore.
Thanks
Norbert

Posts: 2

Participants: 2

Read full topic

@bghoush wrote:

Hi All,

Can you please help me with below error when trying to do yum update?

Downloading packages:
sng-pkgs/7/x86_64/prestodelta | 78 B 00:00:00
php56w-intl-5.6.40-1.sng7.x86_ FAILED
http://sng7.com/sng7/sng7/RPMS/php56w-intl-5.6.40-1.sng7.x86_64.rpm: [Errno 14] HTTP Error 404 - Not Found B/s | 0 B --:–:-- ETA
Trying other mirror.
To address this issue please refer to the below wiki article

https://wiki.freepbx.org/display/PPS/YUM+Errors

If above article doesn’t help to resolve this issue please use https://issues.freepbx.org/

php56w-common-5.6.40-1.sng7.x8 FAILED
http://sng7.com/sng7/sng7/RPMS/php56w-common-5.6.40-1.sng7.x86_64.rpm: [Errno 14] HTTP Error 404 - Not Found/s | 0 B --:–:-- ETA
Trying other mirror.
php56w-pecl-redis-2.2.7-1.w7.x FAILED
http://sng7.com/sng7/sng7/RPMS/php56w-pecl-redis-2.2.7-1.w7.x86_64.rpm: [Errno 14] HTTP Error 404 - Not Founds | 0 B --:–:-- ETA
Trying other mirror.

Error downloading packages:
** php56w-intl-5.6.40-1.sng7.x86_64: [Errno 256] No more mirrors to try.**
** php56w-common-5.6.40-1.sng7.x86_64: [Errno 256] No more mirrors to try.**
** php56w-pecl-redis-2.2.7-1.w7.x86_64: [Errno 256] No more mirrors to try.**

cat /etc/schmooze/pbx-version
12.7.4-1804-2.sng7

tried to do yum clean all but didn’t work.

Thanks

Posts: 1

Participants: 1

Read full topic

@Benn5325 wrote:

We are running FreePBX 14.0.11 / Asterisk 16.2.1 PJSIP endpoints
We have a very odd issue with the DND feature codes
*78 & *76 (If DND is not active) work fine. Enter either of them and get the DND activated as expected.
*79 & *76 (If DND is active, both return a 603 Declined
Cannot figure this out… Any ideas?

DND.jpg1920×229 69.9 KB

Posts: 2

Participants: 2

Read full topic

@olgrko wrote:

I used FreePBX 14.0.11, Asterisk 13.26.0, Sangoma Linux 3.10.0-862.14.4. I need to use about 10000 inbound routes. I imported 2000 routes and reboot server everything is OK. But when i imported next 2000 routes and make reboot I have the mistake - in start.class.php line 187, Unable to connect to Asterisk. (on 12 secs). If i run asterisk stop and fwconsole start from console - server works. Any ideas? Thank you.

Posts: 1

Participants: 1

Read full topic

@Adamsffi wrote:

This is ongoing after the updates not completing and causing kernel issues.
Status: FreePBX 14 on Asterisk 13
±-----------------------------------------------------------+
| Your system is currently up to date! |
| Your PBX is up to date. |
| Also 1 Uninstalled module. |
±-----------------------------------------------------------+
Linux adamspbx.adamsbest.net 3.10.0-862.14.4.el7.x86_64 #1 SMP Wed Sep 26 15:12:11 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux

Issues with SIPStation connection this morning but that cleared up. Trunks register but still no server connection in SIPStation module of GUI.

Everything is fine after reboot for about thirty minutes. Then the phones and trunks loose connection even thought the GUI says all is fine. A fwconsole reload early on will get connection back for a while. If it goes very long sometimes a fwconsole restart will restart it and sometimes it can’t kill asterisk. A reboot is required, even that takes several minutes to shutdown. I suspect killing asterisk is the issue there. Boots fine cycle starts over.

Any Ideas?

Posts: 1

Participants: 1

Read full topic