Fail2Ban banning wrong IP address
@Hawkeye wrote: Hi, this morning office unable to get/make calls. sip show peers shows all extensions unreachable. iptables showed the office IP address was banned for fail2ban-SIP....
View ArticleNo audio (either direction) on a system that has been working for some time...
@DarkQuark wrote: Greetings, this is either something really odd or I am just totally overlooking something. I have a production system that works fine with handsets. And it has been working that way...
View ArticleNo Active Connection Disconnects the Call and Does Not Go to Voicemail
@mikeopry wrote: I have a Cisco SPA504G IP Phone, but I often like to use my Softphone (Jitsi). 3 Scenarios: If the Cisco phone is disconnected and I do not answer the softphone or the softphone is...
View ArticlePolycom Randomly Reboots
@newseminary wrote: Hi, My Polycom 550 has been registered through TFTP to a hosted server through endpoint manager for about a year now with no problems. I updated it to a later firmware about 3-4...
View ArticleVoicemail to email, no attachment
@coratec wrote: Hi everyone, i´m running freepbx 12.0.76.4. I´ve configured the voicemail on my extensions, and works great. Also i receive notofications by email of backups and upgrade with file...
View ArticleExtension in hotline
@diegogodoi wrote: Hello, I would like to know if you have option to leave a station in hotline in freepbx? Thank you Posts: 5 Participants: 3 Read full topic
View ArticleDialing twice to get out?
@josephchrz wrote: Hello i have a small setup with my home is the hub where the pbx server is and it haves analog card on it because the lines are cheaper the sip lines online. So my friends wanted to...
View ArticleAutoprovision Yealink phones with 2012 DHCP server?
@sentinelace wrote: I am trying to provision over 20 phones which right now I can point to my pbx manually and they work. I used option 66 with DHCP and they do not provison. I did read you can use...
View ArticleDropped audio after muting softphone
@conexatech wrote: Centos: 6.8Host: Google Compute EngineFreepbx: 12.0.76.4Asterisk: 13.11.2 I'm having a slight issue with audio; Whether the calls is incoming or outgoing if the agent places the...
View ArticleClik here to view.
FreePBX Install on NUC Intel Celeron dual core 2.4Mhz
@itmonitor wrote: Hi. I decided to move from a Beaglebone Black RasPBX into a FreePBX install. Seems like the Beaglebone can handle only 4 simultaneous calls. I may purchase an used Intel NUC Celeron...
View ArticleCall fails to transfer with out force trunk CID enabled - Help!
@samuelrock wrote: I have a PBX that is set up with incoming/outgoing trunks to vitelity lets call it PBX A. I have a few other PBX units that connect to PBX A, we will call them PBX B, PBX C. If I...
View ArticleAuto Drop calls between 2 times( 5 and 10 mins)
@Kris85 wrote: Hi all, Is their away i can have calls which are sat on an IVR get auto dropped at random times but say over 5 mins but no longer than 10 mins? Many Thanks Kris Asterisk (Ver....
View ArticleDesktop Popup when phone rings
@markcrobinson wrote: I'd like to set up each of my users so that a popup appears on their desktop when their phone rings. I believe I've seen something like this. It will eventually be a piece of a...
View ArticleCan G729 licenses be added to a non-Distro installation?
@amztransit wrote: We may be forced to move to a lower bandwidth setup, and I'm looking to cut usage everywhere I can. I'm running FreePBX 13 on CentOS 7. Can I add Digium G729 licenses? Posts: 3...
View ArticleCDR Reports
@ITWORX wrote: HI, Does anyone know of a basic add in or third party tool to allow for simple interpretation of CDR data. I am basically trying to generate daily reports of total calls made per...
View ArticleClik here to view.
Cheap DID local phone number
@itmonitor wrote: Hello. Not sure this is the right forum. I am looking for a DID local phone number in Brazil. My search in Internet gives me numerous options but when I go into details, some of them...
View ArticleIncrease duration of DTMF on Digium PRI gateways
@avayax wrote: Anybody know if there is a way to increase duration of DTMF tones on Digium PRI gateways (G200)? I have problems with DTMF going through my gateways not being accepted on the other end,...
View ArticleChange DIALSTATUS for outgoing calls
@dnwk wrote: Is there a way to automatically mark a out going call answered, regardless of line status? The extension is connected to cellphone network and require a SIP 200 within 30 seconds. Posts:...
View ArticleMerlin magix integration with freepbx as secondary voicemail
@ydarb wrote: Hey y'all,Thanks for taking a look. I'm trying to use freepbx as secondary voicemail, and have it work the same as main merlin magix voicemail. I'm using this as reference:...
View ArticleLinksys SPA3000 PSTN Gateway w/ FreePBX 13 Inbound Not Ringing
@stephendt wrote: Hey guys, been tearing my hair out over this one. I originally gave this a go a couple of months ago with no success, so I decided to swap over my ATA today and give it another go. I...
View Article