Quantcast
Channel: General Help - FreePBX Community Forums
Browsing all 12645 articles
Browse latest View live

Inbound call doesn't work on FreePBX

@frank83 wrote: Hello, i have a problem with the inbound calls, i receive the following errors Unable to create channel of type 'SIP' @ from-sip-external: "Rejecting unknown SIP connection". What can...

View Article


Error in config.php

@savenko wrote: Hello!After install and login as admin i see window "Please Select the default locales of the PBX". I can not save this page((( In console i see error:config.php:625 Uncaught...

View Article


FreePBX 13 - ICE support button missing

@stefanverster wrote: Good day Kindly note that we have a FreePBX 13 setup running Asterisk 13 on Centos 7. We had WebRTC extensions registered on the PBX and all was working well until we noticed...

View Article

Vega 50 Endpoint Manager

@brandon220 wrote: I recently purchased a Vega 50 (2FXO and 4 FXS) and am having difficulty with the setup and getting the trunks to register. I noticed there are options for the Vega 50 in the EM....

View Article

Polycom TLS

@fgunno wrote: I want to know if someone can help me with the provisioning of Old polycom phone via EndPoint Manager, and TLS. It's a IP330 with Firmware 3.3.5.No preinstalled device certificate. I...

View Article


Image may be NSFW.
Clik here to view.

OSS End Point Manager Error

@creepyjas wrote: Trying to search / download templates for my PBX (which is btw, for educational purposes only). Upon clicking the "Check for Update", a huge wall of code shows up (see image). Do we...

View Article

"Break" button feature?

@SilkBC wrote: Is there a way to enable a "break" button? We have a site that has two reception phones... a primary on one floor and a secondary on another. The client wants the calls to come in to...

View Article

Setting variables used in User Manager emails

@WB3FFV wrote: I am trying to figure out how to set the fully qualified domain name for usage in the emails sent to a new user on the PBX, or when a password is reset. In the settings section of the...

View Article


Image may be NSFW.
Clik here to view.

Looking for a full-time FreePBX developer and system manager

@conversational wrote: Subject says it all Remote Position Develop Custom Plugins Integrate FreePBX with our billing system Mass migration for current system Please only serious inquiries and you need...

View Article


Outbound MOH selection at a station level

@kristiandg wrote: Good evening. Question about MusicOnHold. We have a customer that wants a group of phones in a call center to have dedicated MOH. On the inbound, that's easy - I can do it by the...

View Article

Attended Call Transfer Return Issue

@tanvirkdi wrote: Hello All Hopefully someone can help us here. We are running into an issues with calls being returned from an attended transfer. Here is what happens, an external caller calls into...

View Article

How to configure Direct RTP Calling

@dalonso wrote: I´m trying to configure this scenario. SIP Phone <----SIP------> Asterisk <-----G711 RTP---------> Industrial device. When the Sip phone call to Industrial device Asterisk...

View Article

Potential Hardware

@nabberuk wrote: Hi All, Just wanted peoples opinions on if FreePBX (including redhat) will happily run on the following hardware? Gigabyte Intel GA-H270M-DS3H motherboard Intel i5-7400 Crucial 8GB...

View Article


Outbound calls

@bajramia wrote: Hi,I have installed asterisk im routing calls to avaya then avaya to our ISP i cant make outbound calls i called avaya they told me this. If the Asterisk side can be changed to...

View Article

Looking for some pointers. Migrating from Elastix 4 to FreePBX 14

@renatohtpc wrote: Here is my current setup, I am running Elastix 4 with about 10 or so extensions (a few Grandstreams phones and a handful of Bria clients on iphone and iPads). In addition to this, I...

View Article


Zulu user extension

@robfantini wrote: I have some confusion regarding users , extensions and zulu . we use FreePBX 13.0.192.9 My questions: for zulu should a dedicated extension be used [ i assume so ] for a user with...

View Article

AudioCodes 320HD light BLF

@charneval wrote: Hello.I have configured in the freepbx of model 320hd audiocodes phones but I can not run the lamp field lights.Have you ever used this model of phones? The programmed buttons in the...

View Article


Custom Contexts applied to a IAX2 trunk

@robertocarna wrote: Dear, I have a Freepbx PBX1 connected to a similar PBX2. I have created a IAX2 trunk betwwen them. For my local extensions (PBX1) I have created several custom contexts created by...

View Article

Zulu and UCP denying logins

@kristiandg wrote: Good afternoon... Starting a few days ago, Zulu started whining about Invalid Credentials (ones that have been stored in the config for over a month). At first I assumed it had to...

View Article

Problem with covert.freepbx.com migration

@Cord78 wrote: Hopefully someone can assist me with the following error. Trying to migrate an old freepbx 2.10 machine to the newest distro. I read a recommendation in another post to use the...

View Article
Browsing all 12645 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>