Cisco 7941
@Don44 wrote: I have a cisco 7941 that I am trying to get to register with FreePBX and was wondering if anyone had the config files that they could share with me. Thanks Posts: 1 Participants: 1 Read...
View ArticlePJSIP extensions - no audio
@DarkQuark wrote: Greetings, I am just doing some testing with PJSIP (via official v14 distro) just taking it for a test drive but I am having an issue where no audio is heard in either direction....
View ArticleDisable direct media per endpoint
@Pentium5 wrote: Hi all, I have two locations running FreePBX 13.0.192.14 with Asterisk 13.16.These locations are connected via PJSIP trunk over OpenVPN tunnel built between Asterisk...
View ArticleCannot Retrieve Parked Calls - Says No Call At Parked Extension
@BrightKJ wrote: I have a very small FreePBX installation with only 10 extensions. As far as I can tell, every part of the system has been updated to the most current stable releases for all...
View ArticleLabels Disappeared on SPA504G After Adding SPA500DS
@BrightKJ wrote: I originally started out with a bunch of Cisco SPA504G phones which were working normally and showed all labels as configured in EPM. However, when I added an SPA500DS sidecar to five...
View ArticleDAHDI fault tracing Sangoma A200
@RichE wrote: Just carried out some module updates and found that i am now getting the 'all circuits busy' on our analogue line Outbound routes still in place, A200 card still seen but placing a call...
View ArticleDeny/permit subnets for pjsip device options
@avayax wrote: For Chan_sip extensions there are permit/deny fields under device options to allow or deny certain subnets.Is there an equivalent for pjsip extensions? Posts: 1 Participants: 1 Read...
View ArticleClik here to view.
SIP Trunk Settings
@w14219 wrote: I am not able to receive calls with FreePBX 13. Below is the trunk configuration I am using.... do you see any thing wrong here? Please note I am registering with Vitelity via IP...
View ArticleClik here to view.
Apply Config takes over 1 minute
@SilkBC wrote: Hello, I have a client who is running FreePBX v10.13.66-20, which was upgraded from the v6.xx track a few weeks ago. Since then the client has been "noticing" things that they are...
View ArticleClik here to view.
How to get extension's Display name in event Incoming voice call?
@ar_gen_tum wrote: How to get extension's Display name in event Incoming voice call? I want send jabber message to user using external Jabber server if he/she missed a call. Jabber user in external...
View ArticleExt not ringing for queue calls after call parked
@stevet wrote: Apologies in advance if I'm not making much sense, quite sick today. Here's what happens - a call comes in via a queue. I answer the call. It's for someone else, so I park the call....
View ArticleExtension rings once then "No Answer"
@dcrowl wrote: We have a queue setup with 5 people in linear mode. All exts ring fine up till the last one (1332). This user starts to ring properly and then after one ring the asterisk log says "No...
View ArticleCan someone tell me how to delete backups?
@Chrisk wrote: I keep getting emails saying my storage is 80% full. However my server is no where near full. How can i see the backups it created and delete them? Thanks Posts: 4 Participants: 2 Read...
View ArticleSoftphone_xlite
@Abayomi wrote: HI All, I am using X-lite with Softphone.com for my softphones. I can make and receive calls no problems, and I can see presence information, however I cannot chat. I am not getting...
View ArticleConnecting Two FreePBX/Asterisk Systems Together ,Direct dial question
@omidkosari wrote: Hello, I have connected 2 boxes with the help of this article Connecting Two FreePBX/Asterisk Systems Together Over the Internet ->...
View ArticleTransfer Announcment
@PitzKey wrote: Hello all, Is it possible to play announcement when transferring a call to a extension with the destination information? For example: 101 Transfers to 106, it should play something...
View ArticleClik here to view.
Multiple nic, reply sent from other interface
@tuta wrote: First, want to apologize if this topic was covered before.I have a server, running FreePBX 11 w/Asterisk 11.25.1 with two nic: external eth0 (208.x.x.203) and internal eth1 10.0.0.234....
View ArticleCisco 7960 Skinny vs SIP
@mvogel4949 wrote: I have a customer that is hoping to reuse some Cisco 7960 IP phones with Skinny integration. Will these work with FreePBX or does it have to be the SIP version? Thanks Posts: 1...
View ArticleE-mail voicemails in VM after they built up
@adtopkek wrote: We have a person who has ~50 voicemails and wants them all e-mailed to him now. The voicemails are in the inbox and have already been recorded. Is there a way to get freepbx to go...
View ArticleTroubles after upgrading
@ronandann wrote: After upgrading FreePBX from 6.12.65-32 running Asterisk version 11 to 13.0.192.9 running Asterisk version 13.15.0,we are now seeing a problem with phones just randomly showing No...
View Article