CID Superfecta usage
@jacksnodgrass wrote: I have: freepbx-13.0.101-1.shmz65.1.46.noarchasterisk13-13.8.0-1.shmz65.1.105.x86_64 I have the CID Superfecta setup as far as sources go. I can run a Debug/Test Run Scheme and...
View ArticleFollow the sun configuration
@get2guy wrote: Hi All, We have an main IVR for our PBX and i need to set up a 24 hours support that will follow offices around the world. What i want to perform is main IVR > 6 for support >...
View ArticleHow to setup trunks between two freepbx
@zhaolin22 wrote: I try to setup trunks between two freepbx systems. In Peer details settings, I need to fill in username and password. The general content is like...
View ArticleAdmin logs
@JSF wrote: Good day, I am the main admin of a FreePBX and I have some general helpdesk guys that create etc extensions for me. So I have been finding that they disable and enable call recording on...
View ArticleFreePBX w/ AudioCodes MP-118 Roll Over for Incoming Lines
@jsandlin0803 wrote: I am setting up a new FreePBX system. I am setting up an Audiocodes MP-118 (x8 FXO) Gateway to work as the incoming and outgoing lines. I need 3 of the lines to roll over if the...
View ArticleBLF issue after power outage
@silicon1 wrote: I am confused what happened but we had a power outage because a building near us caught fire, only one extension BLF work which is mine (115) and I can't figure out why it is the only...
View ArticleClik here to view.
Networking issue
@Terrum wrote: I'm attempting to setup FreePBX on a VPS for a client. The VPS uses bridged networking and is configured as it should be (with the IP's MAC address, and the IP has worked flawlessly. on...
View ArticleOSS EPM + Polycom SoundPoint Contacts
@zirophyz wrote: Hi, We use Polycom SoundPoint range of phones and I would like to get the contacts directories working properly. Using HTTP to serve the configs in OSS Endpoint Manager - the symptoms...
View ArticleODBC Adaptuve CDR is not working
@tedd777 wrote: Hello , I have an installation of freepbx 13 with asterisk 13.8 on ubuntu 15.04 , unfortunately the cdr is not working.database and table created but no records.According to freepbx...
View ArticleDirect SIP trunk line indication / access from BLF / flexible buttons?
@pvladi wrote: I am sorry if this was asked before, but I was unable to find any information on how to set up flexible buttons for direct access to SIP lines.For example, SIP provider "A" offers two...
View ArticleHow To Remove callerid= From sip_additional.conf?
@kbocek wrote: I can't get Caller ID to display on my phones. I see: callerid=Home Line <09253131111> in sip_additional.conf for my trunks. Wouldn't this overwrite the incoming CID? How do I...
View ArticleError after upgrade from FreePBX 11 to 13
@Bradbpw wrote: I upgraded my backup server to 13 the other day and now I'm getting an error in the GUI "Can not connect to asterisk" I ran the command "amportal start" and received this error:...
View ArticleDaylight freepbx 13
@claloano wrote: I FreePBX 13 and I can not activate daylight "I am in Italy" Can anyone give me some help? Posts: 4 Participants: 4 Read full topic
View ArticleVoice issue between Remote extensions
@telili wrote: Hi all --- I have Forwarded the range ports 10000 20000 on in router 2911, to allow remote extensions work on a FreePbx system, seems to be a good work because my CSip simple on my...
View ArticleIncoming call only works shortly when trunk is disabled
@Erik_Jansen wrote: Hello, I am discovering the possibilities with Freepabx (13.0.106) and Asterisk (13.7.0) on a raspberry PI. I also use version 12 of Freepabx and there is everything working as it...
View ArticleDigit translation
@Keithc wrote: Is it possible to do a complete number translation in the outbound routes? I want to strip the complete number and replace it with a new number. If so, can someone give me an example?...
View ArticleOnly when calling from estensione: unable to create channel of type 'SIP'...
@frankge973 wrote: Hello, I own from many years a freepbx server well configured. Now, I added an external extension and forwarded the requested ports . All seems ok but from time to time both LAN...
View ArticleInbound trunk issue - 401 unauthorized?
@fboyd wrote: Hello, I have a strange problem with inbound calls, they all seem to fail with a 401 unauthorized and I'm not quite sure what the issue is. There is no authentication required for this...
View ArticleSend queue calls directly to fail-over destination if no agents logged in?
@jdbn wrote: Hi Folks, When I have no agents logged into to take calls in a queue, is there a way to skip the join announcement and go directly to the fail-over destination? I don't want callers to...
View ArticleInformation showed on CDR Reports module
@gatozgz wrote: Hello good morning, On the CDR reports module when you press "Search" appears info. related with the duration field instead of the billsec field. The billsec field is usually more...
View Article